- Practice
- About 24 min
- 5 practice questions
Variation of molar conductivity with concentration and Kohlrausch's law
Explain how molar conductivity changes with dilution for strong and weak electrolytes, state the Debye-Huckel-Onsager equation and use Kohlrausch's law to find limiting molar conductivity, degree of dissociation, Ka and solubility.
If something looks wrong, please tell us.
By the end of this lesson you can
- Use Kohlrausch's empirical equation Λm = Λ°m − k√C and read a plot of Λm against √C.
- Explain the difference between strong and weak electrolytes on dilution.
- State the Debye-Huckel-Onsager equation and what its constants depend on.
- State Kohlrausch's law and use it to find Λ°m of a weak electrolyte, α, Ka and the Ksp of a sparingly soluble salt.
Molar conductance puts one mole of electrolyte between the electrodes, so it lets us compare solutions fairly. Friedrich Kohlrausch measured it for many electrolytes over a range of concentrations and found that it always rises as the solution is diluted. How it rises tells strong electrolytes from weak ones.
Kohlrausch's empirical equation
For strong electrolytes such as KCl, NaCl and HCl, Kohlrausch found that Λm = Λ°m − k√C. This has the form y = mx + c: a plot of Λm against √C is a straight line with slope −k and intercept Λ°m on the Λm axis. Λ°m is the limiting molar conductivity, the value approached at infinite dilution (C → 0).
Λm against √C for strong and weak electrolytes
-
Strong electrolyte (KCl)
- Fully dissociated at all concentrations
- Λm high, rises slowly and steadily on dilution
- Λm against √C is a straight line
- Λ°m found by extending the line to C = 0
-
Weak electrolyte (CH₃COOH)
- Only partly dissociated
- Λm low and almost flat at higher C
- Rises very steeply as C approaches zero
- Curve cannot be extended; use Kohlrausch's law
Why strong electrolytes behave so. At high concentration there are many ions in a given volume, so the attraction between oppositely charged ions is strong, and greater solvation adds a viscous drag. Both slow the ions. On dilution the ions move far apart; at infinite dilution their interactions become negligible and Λm reaches its maximum.
Why weak electrolytes behave so. At ordinary concentrations only a small fraction is dissociated, so Λm is small and changes little. Near zero concentration the degree of dissociation rises sharply (Ostwald's dilution law), so Λm shoots up and the curve becomes almost parallel to the Λm axis.
The Debye-Huckel-Onsager equation
Debye and Huckel studied how ion-ion interaction lowers the conductivity of strong electrolytes. They pictured each ion surrounded by an ionic atmosphere of opposite charge and, assuming complete dissociation, related Λm to concentration; Onsager developed the equation further. For a uni-univalent electrolyte: Λm = Λ°m − (A + BΛ°m)√C, where A and B are constants that depend only on the solvent (its dielectric constant D and viscosity η) and the temperature T. It explains the slope k of Kohlrausch's straight line.
Kohlrausch's law of independent migration of ions
At infinite dilution, the limiting molar conductivity of an electrolyte equals the sum of the limiting molar conductivities of its ions: cations and anions migrate independently. For NaCl, Λ°m(NaCl) = λ°(Na⁺) + λ°(Cl⁻). For an electrolyte AₓBᵧ, Λ°m = xλ°(Aʸ⁺) + yλ°(Bˣ⁻).
The evidence: according to the textbook's data at 298 K (in S cm² mol⁻¹), Λ°m(KCl) − Λ°m(NaCl) = 149.86 − 126.45 = 23.41, and the same difference 23.41 appears for KBr − NaBr and KNO₃ − NaNO₃. Whatever the anion, swapping Na⁺ for K⁺ changes Λ°m by the same amount, so each ion makes its own fixed contribution. Likewise Λ°m(KBr) − Λ°m(KCl) = 2.06 for every cation tried.
Λ°m(AₓBᵧ) = x λ°(Aʸ⁺) + y λ°(Bˣ⁻). For a weak electrolyte: α = Λm/Λ°m and Ka = CΛm² / [Λ°m(Λ°m − Λm)].
Applications of Kohlrausch's law
1. Λ°m of a weak electrolyte. It cannot be measured directly, but it can be built from strong electrolytes. For acetic acid: Λ°m(CH₃COONa) + Λ°m(HCl) − Λ°m(NaCl) = [λ°(Na⁺) + λ°(CH₃COO⁻)] + [λ°(H⁺) + λ°(Cl⁻)] − [λ°(Na⁺) + λ°(Cl⁻)] = λ°(H⁺) + λ°(CH₃COO⁻) = Λ°m(CH₃COOH).
Worked example 1: Λ°m of ammonium hydroxide
Take Λ°m values (S cm² mol⁻¹): NH₄Cl 149.7, NaOH 248.1, NaCl 126.5. Working: Λ°m(NH₄OH) = Λ°m(NH₄Cl) + Λ°m(NaOH) − Λ°m(NaCl) = 149.7 + 248.1 − 126.5 = 271.3 S cm² mol⁻¹. Check that the unwanted ions cancel: (NH₄⁺ + Cl⁻) + (Na⁺ + OH⁻) − (Na⁺ + Cl⁻) = NH₄⁺ + OH⁻.
2. Degree of dissociation. For a weak electrolyte, α = Λm/Λ°m. 3. Dissociation constant. Putting α into Ostwald's law Ka = α²C/(1 − α) gives Ka = CΛm² ÷ [Λ°m(Λ°m − Λm)].
Worked example 2: α and Ka of acetic acid
Practice data: 0.01 M acetic acid has Λm = 16.3 S cm² mol⁻¹, and Λ°m = 390.7 S cm² mol⁻¹. Working: α = 16.3 ÷ 390.7 = 0.0417 (4.17%). Ka = CΛm² ÷ [Λ°m(Λ°m − Λm)] = 0.01 × (16.3)² ÷ [390.7 × (390.7 − 16.3)] = 0.01 × 265.7 ÷ (390.7 × 374.4) = 2.657 ÷ 146 278 = 1.82 × 10⁻⁵.
4. Solubility and Ksp of a sparingly soluble salt. For AgCl, AgCl(s) ⇌ Ag⁺ + Cl⁻; if the concentration is C mol L⁻¹, Ksp = C². Its solution is so dilute that Λm ≈ Λ°m, so from Λm = κ × 10⁻³/C, C = κ × 10⁻³ / Λ°m, and Ksp = (κ × 10⁻³ / Λ°m)².
Worked example 3: Ksp of AgCl from conductivity
Practice data: a saturated AgCl solution has κ = 1.84 × 10⁻⁴ S m⁻¹ (water's own conductivity already subtracted), and Λ°m(AgCl) = 1.383 × 10⁻² S m² mol⁻¹. Working: C = κ × 10⁻³ ÷ Λ°m = (1.84 × 10⁻⁴ × 10⁻³) ÷ (1.383 × 10⁻²) = 1.33 × 10⁻⁵ mol L⁻¹. Ksp = C² = (1.33 × 10⁻⁵)² = 1.77 × 10⁻¹⁰.
Key takeaways: Λm rises on dilution; for strong electrolytes Λm = Λ°m − k√C, a straight line. Weak electrolytes need Kohlrausch's law: Λ°m is the sum of the ions' λ° values. Then α = Λm/Λ°m, Ka = CΛm²/[Λ°m(Λ°m − Λm)], and the solubility of a sparingly soluble salt is κ × 10⁻³/Λ°m.
Check your understanding
-
1. Why can Λ°m of acetic acid not be found by extending its Λm against √C graph to zero concentration?
- Acetic acid does not conduct at all.
- The graph for a weak electrolyte is not a straight line and rises steeply near zero.
- Λm of acetic acid decreases on dilution.
- Acetic acid is fully dissociated at all concentrations.
Show answer
Answer: B. For a weak electrolyte α rises sharply near infinite dilution, so the curve shoots up almost parallel to the Λm axis and cannot be extrapolated. That is why Kohlrausch's law is used instead.
-
2. Kohlrausch's law states that at infinite dilution,
- each ion of an electrolyte makes a definite contribution to Λ°m, whatever the other ion
- Λm of all electrolytes becomes equal
- the conductivity of a solution becomes zero
- the cation and anion always have equal λ° values
Show answer
Answer: A. The law of independent migration says Λ°m is the sum of independent ionic contributions, such as λ°(Na⁺) + λ°(Cl⁻). The constant difference of 23.41 between K⁺ and Na⁺ salts is the evidence.
-
3. Given Λ°m (S cm² mol⁻¹): HCl 426.2, NaCl 126.5 and sodium propanoate 85.9, what is Λ°m of propanoic acid?
- 638.6
- 213.8
- 385.6
- 466.8
Show answer
Answer: C. Λ°m(acid) = Λ°m(sodium salt) + Λ°m(HCl) − Λ°m(NaCl) = 85.9 + 426.2 − 126.5 = 385.6 S cm² mol⁻¹. The Na⁺ and Cl⁻ contributions cancel, leaving H⁺ and the propanoate ion.
-
4. A weak acid has Λm = 39 S cm² mol⁻¹ at a certain concentration and Λ°m = 390 S cm² mol⁻¹. What is its degree of dissociation?
- 0.01
- 10
- 0.9
- 0.1
Show answer
Answer: D. α = Λm ÷ Λ°m = 39 ÷ 390 = 0.1, so 10% of the acid is dissociated.
-
5. In the Debye-Huckel-Onsager equation, the constants A and B depend on
- the concentration of the electrolyte only
- the dielectric constant and viscosity of the solvent and the temperature
- the charge of the electrodes
- the cell constant of the conductivity cell
Show answer
Answer: B. A and B are fixed by the medium (its dielectric constant D and viscosity η) and the temperature T. The concentration appears separately in the √C term.
Sign in to keep track of the lessons you finish.