• Practice
  • About 30 min
  • 15 practice questions

Final self-assessment: Electro Chemistry

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions in one sitting of about 30 minutes, with rough paper. Use 1 F = 96 500 C mol⁻¹ and 2.303RT/F = 0.0591 V at 298 K unless a question says otherwise. The questions are harder than the lesson checks and mix ideas from all five lessons. Check your answers only after you have finished, and read every explanation.

Final self-assessment

  1. 1. A conductivity cell filled with a KCl solution of κ = 0.14 S m⁻¹ has a resistance of 500 Ω. What is the cell constant?

    1. 0.00028 m⁻¹
    2. 3571 m⁻¹
    3. 70 m⁻¹
    4. 7.0 m⁻¹
    Show answer

    Answer: C. κ = (1/R)(l/A), so l/A = κ × R = 0.14 S m⁻¹ × 500 Ω = 70 m⁻¹.

  2. 2. The same cell (l/A = 70 m⁻¹) filled with a 0.005 M solution of an electrolyte shows R = 1000 Ω. What is the molar conductance of this solution?

    1. 1.4 × 10⁻² S m² mol⁻¹
    2. 7.0 × 10⁻² S m² mol⁻¹
    3. 14 S m² mol⁻¹
    4. 1.4 × 10⁻⁵ S m² mol⁻¹
    Show answer

    Answer: A. κ = (l/A) ÷ R = 70 ÷ 1000 = 0.070 S m⁻¹. Λm = κ × 10⁻³ ÷ M = 0.070 × 10⁻³ ÷ 0.005 = 1.4 × 10⁻² S m² mol⁻¹.

  3. 3. On diluting a solution of KCl, what happens to its conductivity (κ) and its molar conductance (Λm)?

    1. Both increase.
    2. κ decreases but Λm increases.
    3. κ increases but Λm decreases.
    4. Both decrease.
    Show answer

    Answer: B. κ is the conductance of a fixed volume, and dilution leaves fewer ions in it, so κ falls. Λm refers to one mole of electrolyte, and on dilution the ions interact less and move more freely, so Λm rises.

  4. 4. Given Λ°m (S cm² mol⁻¹): HCl 426, NaCl 126 and NaX 100, what is Λ°m of the weak acid HX?

    1. 652
    2. 200
    3. 452
    4. 400
    Show answer

    Answer: D. Λ°m(HX) = Λ°m(NaX) + Λ°m(HCl) − Λ°m(NaCl) = 100 + 426 − 126 = 400 S cm² mol⁻¹.

  5. 5. A 0.02 M solution of HX has Λm = 8.0 S cm² mol⁻¹, and Λ°m = 400 S cm² mol⁻¹. What is Ka of HX?

    1. 4.0 × 10⁻⁴
    2. 8.2 × 10⁻⁶
    3. 1.6 × 10⁻⁷
    4. 2.0 × 10⁻²
    Show answer

    Answer: B. α = 8.0 ÷ 400 = 0.02. Ka = α²C ÷ (1 − α) = (0.02)² × 0.02 ÷ 0.98 = 8.0 × 10⁻⁶ ÷ 0.98 = 8.2 × 10⁻⁶. The same result comes from CΛm² ÷ [Λ°m(Λ°m − Λm)] = 0.02 × 64 ÷ (400 × 392) = 8.2 × 10⁻⁶.

  6. 6. According to the Debye-Huckel picture, why does Λm of a strong electrolyte fall as its concentration rises?

    1. The electrolyte dissociates less at higher concentration.
    2. Each ion's ionic atmosphere of opposite charge drags on it more when ions are crowded.
    3. The solvent's dielectric constant rises with concentration.
    4. Electrons in the solution are slowed down.
    Show answer

    Answer: B. Strong electrolytes are fully dissociated, so the fall is not due to less dissociation. Each ion is surrounded by an atmosphere of oppositely charged ions; the closer the ions, the stronger this drag, giving Λm = Λ°m − (A + BΛ°m)√C.

  7. 7. Given E°(Fe³⁺/Fe²⁺) = +0.77 V and E°(I₂/I⁻) = +0.54 V, will Fe³⁺ ions oxidise iodide ions under standard conditions?

    1. Yes, E° for 2Fe³⁺ + 2I⁻ → 2Fe²⁺ + I₂ is +0.23 V.
    2. No, E° for the reaction is −0.23 V.
    3. Yes, E° for the reaction is +1.31 V.
    4. No, because both potentials are positive.
    Show answer

    Answer: A. Fe³⁺ is reduced (cathode) and I⁻ oxidised (anode): E° = E°(cathode) − E°(anode) = 0.77 − 0.54 = +0.23 V. A positive E° means the reaction is spontaneous, so Fe³⁺ oxidises I⁻ to iodine.

  8. 8. Which statement about the standard hydrogen electrode is correct?

    1. It can act only as a cathode.
    2. Its potential is 0 V only when used as an anode.
    3. It uses a zinc electrode in 1 M HCl.
    4. It is platinum in 1 M H⁺ with H₂ at 1 atm, assigned exactly 0 V, and can act as anode or cathode.
    Show answer

    Answer: D. The SHE is a platinum electrode in 1 M acid with hydrogen gas at 1 atm, assigned E° = 0 V by convention. Depending on the other electrode it can be the anode (H₂ → 2H⁺ + 2e⁻) or the cathode (2H⁺ + 2e⁻ → H₂).

  9. 9. A cell is made from Pb²⁺/Pb (E° = −0.13 V) and Ag⁺/Ag (E° = +0.80 V) electrodes. Which is the correct description?

    1. Lead is the cathode; E° = 0.67 V.
    2. Silver is the anode; E° = 0.93 V.
    3. Lead is the anode; E° = 0.93 V.
    4. Lead is the anode; E° = 1.73 V.
    Show answer

    Answer: C. The electrode with the lower reduction potential (lead) is oxidised and is the anode; Ag⁺ is reduced at the silver cathode. E° = 0.80 − (−0.13) = 0.93 V.

  10. 10. For Cu(s) + 2Ag⁺(aq) → Cu²⁺(aq) + 2Ag(s), E° = 0.80 − 0.34 = 0.46 V. What is ΔG°?

    1. −88.8 kJ mol⁻¹
    2. −44.4 kJ mol⁻¹
    3. +88.8 kJ mol⁻¹
    4. −177.6 kJ mol⁻¹
    Show answer

    Answer: A. Two electrons are transferred (Cu → Cu²⁺ + 2e⁻), so n = 2. ΔG° = −nFE° = −2 × 96 500 × 0.46 = −88 780 J mol⁻¹ ≈ −88.8 kJ mol⁻¹. Using n = 1 gives the wrong −44.4.

  11. 11. For the same reaction (n = 2, E° = 0.46 V), what is the equilibrium constant at 298 K?

    1. About 7.8 × 10⁷
    2. About 3.7 × 10¹⁵
    3. About 15.6
    4. About 1.4 × 10³¹
    Show answer

    Answer: B. log K = nE° ÷ 0.0591 = 2 × 0.46 ÷ 0.0591 = 15.57. K = 10¹⁵·⁵⁷ = 10⁰·⁵⁷ × 10¹⁵ ≈ 3.7 × 10¹⁵. 15.6 is log K, not K.

  12. 12. What is E at 25 °C for the cell Zn | Zn²⁺(0.01 M) || Cu²⁺(1.0 M) | Cu, given E° = 1.10 V?

    1. 1.04 V
    2. 1.10 V
    3. 1.16 V
    4. 1.13 V
    Show answer

    Answer: C. Zn + Cu²⁺ → Zn²⁺ + Cu, n = 2. Q = [Zn²⁺]/[Cu²⁺] = 0.01/1.0 = 10⁻², log Q = −2. E = 1.10 − (0.0591/2)(−2) = 1.10 + 0.0591 = 1.159 ≈ 1.16 V. A small product concentration raises the emf above E°.

  13. 13. What mass of aluminium is deposited at the cathode by 9650 C in the electrolysis of a molten aluminium compound? (Al = 27 g mol⁻¹)

    1. 2.7 g
    2. 0.9 g
    3. 8.1 g
    4. 0.3 g
    Show answer

    Answer: B. Al³⁺ + 3e⁻ → Al, n = 3. Moles of electrons = 9650 ÷ 96 500 = 0.1 mol, which deposit 0.1 ÷ 3 mol of Al. Mass = (0.1/3) × 27 = 0.9 g. Using n = 1 would give 2.7 g.

  14. 14. While a lead storage battery is being recharged, what happens at the electrode that acted as the anode during discharge?

    1. PbSO₄ is reduced to Pb.
    2. PbSO₄ is oxidised to PbO₂.
    3. Pb is oxidised to PbSO₄.
    4. PbO₂ is reduced to PbSO₄.
    Show answer

    Answer: A. During discharge the spongy lead anode is converted to PbSO₄. On recharging the reactions are reversed, so at that electrode (now the cathode) PbSO₄ + 2e⁻ → Pb + SO₄²⁻: PbSO₄ is reduced back to lead.

  15. 15. Magnesium blocks are joined to an underground iron pipe. Which statement explains how this protects the pipe?

    1. Magnesium forms a coating that keeps water away from the iron.
    2. Magnesium makes the iron passive by oxidising it.
    3. Magnesium is a better electrical conductor than iron.
    4. Magnesium, with a more negative E°, is oxidised as a sacrificial anode, and the iron acts as the cathode.
    Show answer

    Answer: D. E°(Mg²⁺/Mg) = −2.36 V is far more negative than E°(Fe²⁺/Fe) = −0.44 V, so magnesium gives up electrons first. It corrodes in place of the iron, which becomes the cathode of the cell: this is cathodic protection, and the blocks must be replaced from time to time.

Questions 1-3: lesson 1 (conductivity, cell constant and molar conductance). Questions 4-6: lesson 2 (variation with concentration and Kohlrausch's law). Questions 7-9: lesson 3 (galvanic cells, notation and electrode potentials). Questions 10-12: lesson 4 (thermodynamics of cells and the Nernst equation). Questions 13-15: lesson 5 (electrolysis, Faraday's laws, batteries and corrosion).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery