• Practice
  • About 25 min
  • 5 practice questions

Galvanic cells, cell notation and standard electrode potentials

Describe the Daniel cell and the salt bridge, write cell notation, measure electrode potentials against the standard hydrogen electrode and use the electrochemical series to find E°cell and predict reactions.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Tell a galvanic cell from an electrolytic cell.
  • Explain the anode, cathode, salt bridge and electron flow in a Daniel cell.
  • Write a galvanic cell in IUPAC notation from its overall reaction.
  • Find standard electrode potentials using the standard hydrogen electrode, calculate E°cell and use the electrochemical series.

Drop a zinc strip into blue copper sulphate solution: the colour fades and a red-brown crust of copper forms on the zinc, Zn(s) + CuSO₄(aq) → ZnSO₄(aq) + Cu(s). The energy of this spontaneous redox reaction is lost as heat. If the oxidation and the reduction are made to happen in separate vessels, the electrons must travel through a wire, and part of that energy becomes electrical energy.

Two kinds of electrochemical cell

An electrochemical cell converts chemical energy into electrical energy or the reverse; it has two electrodes in contact with an electrolyte. In a galvanic (voltaic) cell a spontaneous reaction produces an electric current (a battery). In an electrolytic cell a current from an outside source drives a non-spontaneous reaction.

The Daniel cell

The Daniel cell uses the zinc-copper reaction with the two half reactions separated. The oxidation half cell is a zinc strip in zinc sulphate solution; the reduction half cell is a copper strip in copper sulphate solution. The strips are joined through a switch and a voltmeter, and the solutions are joined by a salt bridge: an inverted U-tube of agar-agar gel containing an inert electrolyte such as KCl or Na₂SO₄, whose ions are neither oxidised nor reduced.

  • Anode (zinc), oxidation: Zn(s) → Zn²⁺(aq) + 2e⁻. Electrons are released into the zinc, so the anode is negative.
  • Cathode (copper), reduction: Cu²⁺(aq) + 2e⁻ → Cu(s). Electrons are used up here, so the cathode is positive.
  • Overall: Zn(s) + Cu²⁺(aq) → Zn²⁺(aq) + Cu(s) (1 Zn, 1 Cu and charge +2 on each side).

The salt bridge keeps the half cells neutral. As zinc dissolves, the anode solution gains Zn²⁺ and would become positive; as Cu²⁺ is removed, the cathode solution would be left with excess SO₄²⁻ and become negative. Anions (Cl⁻) move from the bridge into the anode compartment and cations (K⁺) into the cathode compartment. Electrons flow through the wire from anode to cathode, and ions moving through the solutions complete the circuit. As the cell works the zinc electrode loses mass and the copper electrode gains it. When neither reactant nor product can serve as an electrode, an inert electrode of platinum or graphite is used.

The complete circuit in a Daniel cell

  1. Zinc anode Zn → Zn²⁺ + 2e⁻
  2. External wire electrons flow from zinc to copper
  3. Copper cathode Cu²⁺ + 2e⁻ → Cu
  4. Salt bridge K⁺ to cathode side, Cl⁻ to anode side

Then back to step 1: Zinc anode

Cell notation

The Daniel cell is written Zn(s) | Zn²⁺(aq) || Cu²⁺(aq) | Cu(s). A single vertical bar is a phase boundary and the double bar is the salt bridge. The anode half cell is written on the left and the cathode half cell on the right, with the anode and cathode at the extreme left and right; the emf is written after the diagram, for example E° = 1.1 V.

Worked example 1: notation from an overall reaction

A cell runs on 2Al(s) + 3Ni²⁺(aq) → 2Al³⁺(aq) + 3Ni(s). Working: anode (oxidation): 2Al(s) → 2Al³⁺(aq) + 6e⁻. Cathode (reduction): 3Ni²⁺(aq) + 6e⁻ → 3Ni(s). Both half reactions involve 6 electrons, so they add to give the overall reaction; check the charge: left 3 × (+2) = +6, right 2 × (+3) = +6. Notation: Al(s) | Al³⁺(aq) || Ni²⁺(aq) | Ni(s).

emf of a cell

The force that pushes electrons away from the anode and pulls them towards the cathode is the electromotive force (emf) or cell potential, measured in volts. One volt means that one joule of energy is released for each coulomb of charge that moves between the electrodes: 1 J = 1 C × 1 V. The emf depends on the electrodes, the concentrations and the temperature; according to the textbook the Daniel cell with 1 M solutions gives 1.107 V at 25 °C.

Electrode potentials and the standard hydrogen electrode

The emf of a cell is the sum of the oxidation potential at the anode and the reduction potential at the cathode: Ecell = E(ox, anode) + E(red, cathode). The potential of a single electrode cannot be measured, only the difference between two. So a reference is chosen: the standard hydrogen electrode (SHE), assigned exactly 0 V. It is a platinum electrode in 1 M HCl with hydrogen gas at 1 atm bubbled over it at 25 °C. It can act as cathode, 2H⁺(aq, 1 M) + 2e⁻ → H₂(g, 1 atm), or as anode, H₂ → 2H⁺ + 2e⁻, with E° = 0 either way.

Worked example 2: the potential of a zinc electrode

The cell Zn(s) | Zn²⁺(aq, 1 M) || H⁺(aq, 1 M) | H₂(g, 1 atm) | Pt(s) has a measured emf of 0.76 V, with zinc as the anode. Working: 0.76 V = E°(ox, Zn) + E°(red, SHE) = E°(ox, Zn) + 0, so the oxidation potential Zn → Zn²⁺ + 2e⁻ is +0.76 V. The reduction potential is for the reverse reaction, Zn²⁺ + 2e⁻ → Zn, so E°(Zn²⁺/Zn) = −0.76 V. In the same way a Cu²⁺/Cu electrode measured against the SHE (copper as cathode) gives E°(Cu²⁺/Cu) = +0.34 V.

By the IUPAC convention, the electrode potential of an electrode is the emf of a cell with the SHE on the left and the electrode in question on the right. Using standard reduction potentials for both electrodes, E°cell = E°(cathode) − E°(anode), which is the same as adding the cathode's reduction potential to the anode's oxidation potential.

E°cell = E°ox(anode) + E°red(cathode) = E°red(cathode) − E°red(anode). A positive E°cell means the cell reaction is spontaneous as written.

The electrochemical series

Standard reduction potentials at 298 K, arranged in order, form the electrochemical series. The higher E°, the greater the tendency of the species to accept electrons (stronger oxidising agent) and the less the metal tends to corrode; the lower E°, the stronger the reducing agent.

Part of the electrochemical series (standard reduction potentials at 298 K, as given in the Tamil Nadu textbook)
Half reactionE° (V)
F₂ + 2e⁻ → 2F⁻+2.87
Cl₂ + 2e⁻ → 2Cl⁻+1.36
O₂ + 4H⁺ + 4e⁻ → 2H₂O+1.23
Ag⁺ + e⁻ → Ag+0.80
Fe³⁺ + e⁻ → Fe²⁺+0.77
Cu²⁺ + 2e⁻ → Cu+0.34
2H⁺ + 2e⁻ → H₂0.00
Pb²⁺ + 2e⁻ → Pb−0.13
Fe²⁺ + 2e⁻ → Fe−0.44
Zn²⁺ + 2e⁻ → Zn−0.76
Al³⁺ + 3e⁻ → Al−1.66
Mg²⁺ + 2e⁻ → Mg−2.36
Li⁺ + e⁻ → Li−3.05

Worked example 3: E°cell and a prediction

(a) Mg(s) | Mg²⁺(aq) || Ag⁺(aq) | Ag(s): E°cell = E°(cathode) − E°(anode) = 0.80 − (−2.36) = 3.16 V. (b) Can zinc metal displace lead from a Pb²⁺ solution? For Zn + Pb²⁺ → Zn²⁺ + Pb, zinc is oxidised (anode) and Pb²⁺ reduced (cathode): E° = −0.13 − (−0.76) = +0.63 V. Positive, so yes. (c) Can copper displace hydrogen from 1 M acid? E° = 0.00 − 0.34 = −0.34 V, negative, so no: metals with negative E° displace hydrogen from dilute acids; copper does not.

Key takeaways: in a galvanic cell oxidation happens at the negative anode and reduction at the positive cathode; the salt bridge keeps the solutions neutral. Notation puts the anode on the left: Zn | Zn²⁺ || Cu²⁺ | Cu. Electrode potentials are measured against the SHE (0 V); E°cell = E°(cathode) − E°(anode), and a positive value means a spontaneous reaction.

Check your understanding

  1. 1. In a Daniel cell, which statement is correct?

    1. Zinc is the cathode and is positive.
    2. Electrons flow from copper to zinc through the wire.
    3. Copper is the cathode, where Cu²⁺ ions are reduced.
    4. The salt bridge carries electrons between the solutions.
    Show answer

    Answer: C. Reduction (Cu²⁺ + 2e⁻ → Cu) happens at the copper electrode, which is the cathode and positive. Electrons flow through the wire from zinc to copper, and the salt bridge carries ions, never electrons.

  2. 2. What is the main function of the salt bridge?

    1. It keeps the two solutions electrically neutral and completes the circuit.
    2. It supplies electrons to the cathode.
    3. It speeds up the oxidation of zinc.
    4. It stops the cell reaction when the switch is open.
    Show answer

    Answer: A. Ions from the bridge move into each compartment (anions to the anode side, cations to the cathode side) to balance the charge produced by the electrode reactions, so current can keep flowing.

  3. 3. Which is the correct cell notation for the reaction Fe(s) + 2Ag⁺(aq) → Fe²⁺(aq) + 2Ag(s)?

    1. Ag(s) | Ag⁺(aq) || Fe²⁺(aq) | Fe(s)
    2. Fe²⁺(aq) | Fe(s) || Ag(s) | Ag⁺(aq)
    3. Fe(s) | Ag⁺(aq) || Fe²⁺(aq) | Ag(s)
    4. Fe(s) | Fe²⁺(aq) || Ag⁺(aq) | Ag(s)
    Show answer

    Answer: D. Iron is oxidised, so the Fe | Fe²⁺ anode half cell goes on the left; silver ions are reduced, so Ag⁺ | Ag goes on the right, with the double bar for the salt bridge between.

  4. 4. Using E°(Zn²⁺/Zn) = −0.76 V and E°(Ag⁺/Ag) = +0.80 V, what is E° of the cell Zn | Zn²⁺ || Ag⁺ | Ag?

    1. 0.04 V
    2. 1.56 V
    3. −1.56 V
    4. 2.36 V
    Show answer

    Answer: B. E°cell = E°(cathode) − E°(anode) = 0.80 − (−0.76) = 1.56 V. The coefficient 2 in front of Ag does not multiply E°, because electrode potentials do not depend on the amount of substance.

  5. 5. Which metal will NOT liberate hydrogen from dilute hydrochloric acid under standard conditions?

    1. Zinc
    2. Magnesium
    3. Silver
    4. Iron
    Show answer

    Answer: C. Silver has a positive standard reduction potential (+0.80 V), so for 2Ag + 2H⁺ → 2Ag⁺ + H₂, E° = 0 − 0.80 = −0.80 V: not spontaneous. Zinc, magnesium and iron have negative E° values and do displace hydrogen.

Privacy · Terms · Refunds · Delivery