• Practice
  • About 25 min
  • 5 practice questions

Communication systems: modulation, the communication chain, wave propagation and modern systems

Explain why and how signals are modulated (AM, FM, PM), describe the elements of a communication system, ground, sky and space wave propagation with antenna range, and outline satellite, fibre-optic, radar, mobile and internet communication.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why a baseband signal is modulated onto a carrier, and describe AM, FM and PM.
  • List the advantages and limitations of AM and FM.
  • Describe each block of a communication system and define range, noise, attenuation and bandwidth.
  • Describe ground, sky and space wave propagation, skip distance, skip zone and d = √(2Rh).
  • Outline satellite, fibre-optic, radar, mobile and internet communication.

Communication is the exchange of information. Pioneers such as J. C. Bose, G. Marconi and Alexander Graham Bell, and the arrival of the telegraph, telephone and radio, removed distance as a barrier; the twentieth century added speed and secure data transfer. Electronic communication sends sound, text, pictures or data through wires, cables, optical fibres or free space. This lesson explains how.

Why modulation?

Speech and music are in the audio range, about 20 Hz to 20,000 Hz. Over a short distance they can be sent directly, but over long distances such low-frequency signals fade. So the baseband (information) signal is superimposed on a high-frequency carrier wave, a process called modulation. A high-frequency carrier travels long distances with less attenuation. A sinusoidal carrier is e_c = E_c sin(2πν_c t + φ), with amplitude E_c, frequency ν_c and phase φ; changing one of these with the baseband signal gives amplitude, frequency or phase modulation.

Amplitude, frequency and phase modulation

Amplitude modulation (AM): the carrier's amplitude changes in proportion to the instantaneous amplitude of the baseband signal, while its frequency and phase stay constant. It is used in radio and TV broadcasting. Frequency modulation (FM): the carrier's frequency changes in proportion to the instantaneous amplitude of the baseband signal, with amplitude and phase constant. A rising signal raises the frequency (the wave crowds together, a 'compression'), a falling one lowers it (a 'rarefaction'). With no signal the carrier stays at its centre (resting) frequency, the station's allotted frequency. Phase modulation (PM): the carrier's phase changes with the baseband amplitude, with amplitude and frequency constant; it is used to generate FM signals.

AM and FM compared (points as listed in the Tamil Nadu textbook)
FeatureAmplitude modulationFrequency modulation
What changesCarrier amplitudeCarrier frequency
AdvantagesEasy to transmit and receive; narrower bandwidth; low-cost equipmentMuch less noise (better signal-to-noise ratio); large operating range; high transmission efficiency; bandwidth covers the whole audible range, so better sound
LimitationsMore noise; lower efficiency; smaller operating rangeNeeds a much wider channel; costlier, more complex sets; covers a smaller area

Elements of a communication system

From the speaker to the listener

  1. Information Speech, music, pictures or data
  2. Input transducer Microphone turns sound into an electrical signal
  3. Transmitter Amplifier, oscillator (carrier), modulator, power amplifier
  4. Transmitting antenna Radiates EM waves at the speed of light
  5. Channel Wires, cables, optical fibre or free space
  6. Receiver Antenna, demodulator, amplifier
  7. Output transducer Loudspeaker, screen or computer
  • Input transducer: converts information into an electrical signal; the microphone is the classic example.
  • Transmitter: an amplifier strengthens the weak transducer output; an oscillator makes the high-frequency carrier; the modulator superimposes the baseband signal on the carrier; a power amplifier raises the power to cover the required distance.
  • Transmitting antenna: radiates the radio signal into space as electromagnetic waves.
  • Channel: carries the signal with as little noise and distortion as possible.
  • Receiver: the receiving antenna turns EM waves back into RF signals; the demodulator extracts the baseband signal, which is amplified.
  • Repeaters (receiver plus transmitter) pick up a signal, amplify it and resend it on a different carrier frequency to extend the range; a communication satellite is the best example.
  • Output transducer: turns the electrical signal back into sound, pictures or data.

Key terms. Range: the greatest distance at which the signal is received with enough strength. Noise: unwanted electrical signals that spoil the message, either man-made (vehicles, welding machines, motors) or natural (lightning, radiation from the Sun and stars); it can be reduced but never removed completely. Attenuation: the loss of signal strength along the medium. Bandwidth of a signal: the frequency range it occupies, BW = ν₂ − ν₁. Channel bandwidth: the range of frequencies the system needs to carry a given kind of information.

Propagation of electromagnetic waves

ModeApproximate frequencies (textbook)How it travelsUsed for
Ground (surface) wave2 kHz to 2 MHzGlides along the Earth's surface; attenuates with distanceLocal broadcasting, radio navigation, ship communication
Sky (ionospheric) wave3 MHz to 30 MHzBent back to Earth by the ionosphereLong-distance radio
Space waveAbove 30 MHz (up to about 400 GHz)Straight line, line of sightTV, satellite communication, radar

Sky waves: the ionosphere, from about 50 km up to about 400 km above the Earth, contains ions produced by ultraviolet, cosmic and other high-energy radiation from the Sun. It bends radio waves of suitable frequency back to Earth, an effect the textbook treats as total internal reflection. A wave meeting the ionosphere at a large angle of incidence returns far away; at smaller angles it returns closer; below a certain angle it passes through into space. The shortest ground distance from the transmitter to where the sky wave returns is the skip distance. Between the point where the ground wave dies out and the point where the sky wave first returns, nothing is received: the skip zone.

Space waves travel in straight lines, so the Earth's curvature limits the range. An antenna of height h on an Earth of radius R covers a distance d = √(2Rh); for line-of-sight between two antennas, the total distance is d = √(2Rh_T) + √(2Rh_R).

Line of sight: d = √(2Rh) for one antenna; d = √(2Rh_T) + √(2Rh_R) between two; bandwidth = ν₂ − ν₁.

Some important communication systems

  • Satellite communication: an Earth station sends the signal up to a satellite (uplink, about 6 GHz); a transponder on the satellite amplifies it and sends it down to another Earth station (downlink, about 4 GHz). Weather satellites track clouds and storms such as cyclones; communication satellites carry TV, radio and internet signals; navigation satellites give the position of ships, aircraft and other objects.
  • Fibre-optic communication: light pulses carry information along an optical fibre by total internal reflection. Uses: international and inter-city links, data links, plant and traffic control. Merits: thin and light cables, very large bandwidth, immunity to electrical interference, and cheaper than copper cables of the same capacity (as the textbook states). Limits: more fragile than copper wire, and an expensive technology.
  • RADAR (Radio Detection And Ranging): radiates EM waves and receives the echo from a target to find its range, angle or velocity, even for objects invisible to the eye. The range is found from the round-trip time: d = ct/2. Uses: military detection, ship and aircraft navigation, measuring rainfall and wind speed, and search and rescue.
  • Mobile communication: communication without wires between people in different places, with roaming as the user moves. Uses: voice and fast data on cell phones, sending news worldwide in seconds, controlling home devices through the Internet of Things (IoT), and smart classrooms.
  • Internet: the largest global computer network. Uses: search engines for the World Wide Web, email, instant messaging and social networking, and e-commerce (buying, selling and transferring funds electronically).

Worked example 1: line-of-sight distance

A transmitting antenna is 50 m high and a receiving antenna 32 m high; R = 6400 km. Step 1: d_T = √(2 × 6.4 × 10⁶ × 50) = √(6.4 × 10⁸) = 2.53 × 10⁴ m = 25.3 km. Step 2: d_R = √(2 × 6.4 × 10⁶ × 32) = √(4.096 × 10⁸) = 2.02 × 10⁴ m = 20.2 km. Step 3: d = 25.3 + 20.2 = 45.5 km.

Worked example 2: radar range and bandwidth

(a) A radar pulse returns 0.20 ms after it is sent. d = ct/2 = (3.0 × 10⁸ × 0.20 × 10⁻³)/2 = (6.0 × 10⁴)/2 = 3.0 × 10⁴ m = 30 km. (b) A signal occupies frequencies from 300 Hz to 3400 Hz. Its bandwidth is 3400 − 300 = 3100 Hz = 3.1 kHz.

Key takeaways

  • Modulation puts a low-frequency baseband signal on a high-frequency carrier for long-distance transmission.
  • AM varies amplitude (simple, narrow band, noisy); FM varies frequency (less noise, better sound, wider channel); PM varies phase.
  • Chain: transducer → transmitter (amplifier, oscillator, modulator, power amplifier) → antenna → channel → receiver (demodulator, amplifier) → output transducer.
  • Ground waves 2 kHz-2 MHz; sky waves 3-30 MHz via the ionosphere (skip distance, skip zone); space waves above 30 MHz, line of sight, d = √(2Rh).
  • Satellites (6 GHz up, 4 GHz down), optical fibres (total internal reflection), radar (d = ct/2), mobile and internet.

Check your understanding

  1. 1. In frequency modulation, the quantity of the carrier that changes with the baseband signal is its:

    1. Amplitude
    2. Frequency
    3. Phase only
    4. Speed
    Show answer

    Answer: B. In FM the carrier's frequency varies in proportion to the instantaneous amplitude of the baseband signal, while its amplitude and phase stay constant.

  2. 2. Sky waves are reflected back to the Earth by the:

    1. Ionosphere
    2. Troposphere
    3. Ozone layer only
    4. Earth's magnetic field
    Show answer

    Answer: A. The ionosphere (about 50 km to 400 km up) contains ions that bend suitable radio waves (about 3-30 MHz) back to Earth.

  3. 3. A TV tower is 80 m high and R = 6400 km. The radius of the area it covers by line of sight is about:

    1. 16 km
    2. 64 km
    3. 32 km
    4. 3.2 km
    Show answer

    Answer: C. d = √(2Rh) = √(2 × 6.4 × 10⁶ × 80) = √(1.024 × 10⁹) = 3.2 × 10⁴ m = 32 km.

  4. 4. Which block of a transmitter superimposes the baseband signal on the carrier?

    1. Oscillator
    2. Transducer
    3. Power amplifier
    4. Modulator
    Show answer

    Answer: D. The oscillator makes the carrier, the modulator superimposes the baseband signal on it, and the power amplifier then raises the power for transmission.

  5. 5. A radar echo returns after 0.40 ms. The target is at a distance of:

    1. 60 km
    2. 120 km
    3. 30 km
    4. 12 km
    Show answer

    Answer: A. d = ct/2 = (3.0 × 10⁸ × 0.40 × 10⁻³)/2 = (1.2 × 10⁵)/2 = 6.0 × 10⁴ m = 60 km.

Privacy · Terms · Refunds · Delivery