• Practice
  • About 20 min
  • 5 practice questions

Energy bands and semiconductors: intrinsic, n-type and p-type

Explain how energy bands form in solids, classify insulators, conductors and semiconductors by band gap, and describe intrinsic, n-type and p-type semiconductors with their carriers.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Outline how electronics grew from vacuum tubes to transistors and integrated circuits.
  • Explain how valence and conduction bands form and define the forbidden energy gap.
  • Classify solids as insulators, conductors and semiconductors using band diagrams.
  • Describe intrinsic semiconductors, electrons and holes.
  • Explain doping and the donor and acceptor levels of n-type and p-type semiconductors.

Mobile phones, computers, televisions, washing machines, medical scanners and ATMs all run on electronic circuits. Electronics began with vacuum tubes: J. A. Fleming's vacuum diode and Lee De Forest's triode, which could control electrical signals. Early computers such as ENIAC, designed by J. Presper Eckert and John Mauchly at the University of Pennsylvania, filled a large room with about 18,000 vacuum tubes. The invention of the bipolar junction transistor by Bardeen, Brattain and Shockley (Nobel Prize, 1956), made from germanium and silicon, began the transistor era. Integrated circuits then put whole circuits on one chip, leading to microprocessors and today's laptops and palmtops. All of this rests on one family of materials: semiconductors.

Electronic circuits combine active components, which can control or generate power in a circuit (transistors, diodes, integrated circuits, sensors), with passive components such as resistors, inductors and capacitors.

How energy bands form

In an isolated atom the electron energy levels are sharp and widely spaced. In a solid, atoms are packed closely and the outer electrons of neighbouring atoms influence each other. When two identical atoms come together, each valence level splits into two; with three atoms it splits into three. A real solid has an enormous number of atoms, so each level splits into an enormous number of levels packed so closely that they form a continuous energy band.

The band formed from the valence orbitals is the valence band (VB); the band formed from the empty higher orbitals, into which electrons can jump when given energy, is the conduction band (CB). The gap between the top of the valence band (E_V) and the bottom of the conduction band (E_C) is the forbidden energy gap, E_g = E_C − E_V; no electron can have an energy inside it. Inner electrons are held tightly by the nucleus; valence electrons are loosely bound and can be freed more easily.

Insulators, conductors and semiconductors

TypeBand pictureBand gapResistivity (as given in the textbook)
InsulatorFull VB, empty CB, wide gapAbout 6 eV10¹¹ to 10¹⁹ Ω m
ConductorVB and CB overlapNo gapVery low (good metals about 10⁻⁸ Ω m)
SemiconductorNarrow gapLess than 3 eV10⁻⁵ to 10⁶ Ω m

In an insulator the gap is so wide that neither a strong field nor heating can lift electrons into the conduction band, so there are no free carriers. In a conductor the bands overlap and plenty of electrons are free to drift even at low temperature. In a semiconductor the gap is narrow: at room temperature, thermal agitation breaks some covalent bonds and lifts a few electrons into the conduction band. Heating frees more electrons, so the resistance of a semiconductor falls as temperature rises: it has a negative temperature coefficient of resistance. The most important semiconductors are silicon (E_g = 1.1 eV) and germanium (E_g = 0.7 eV).

Band pictures of the three kinds of solid

  • Insulator
    • Wide gap, about 6 eV
    • No free electrons
    • Does not conduct
  • Semiconductor
    • Narrow gap, under 3 eV
    • A few electrons cross at room temperature
    • Conducts more when hotter
  • Conductor
    • Bands overlap
    • Many free electrons
    • Conducts well even when cold

Intrinsic semiconductors

A pure semiconductor with no foreign atoms is intrinsic. Each silicon atom has four valence electrons and forms covalent bonds with four neighbours. A small rise in temperature breaks some bonds: the freed electron goes into the conduction band and leaves a vacancy, a hole, in the valence band. A hole is a missing electron and behaves as a positive charge, because a neighbouring electron can jump into it, moving the vacancy the other way. In an intrinsic semiconductor the number of conduction electrons equals the number of holes, n_e = n_h = n_i (the intrinsic carrier concentration). The total current is I = I_e + I_h. At 0 K no bonds are broken and an intrinsic semiconductor behaves as an insulator.

Extrinsic semiconductors and doping

The carrier concentration of a pure semiconductor is too small for useful devices. Adding a tiny, controlled amount of impurity, of the order of 100 parts per million according to the textbook, is called doping; the added atoms are dopants, and the result is an extrinsic semiconductor.

n-type: dope silicon or germanium with a pentavalent (group V) element such as phosphorus, arsenic or antimony. Four of its five valence electrons form bonds; the fifth is loosely held, with an energy level (the donor level) just below the conduction band. Very little energy (about 0.01 eV in germanium) frees it, so at room temperature almost every dopant gives a free electron. These impurities are donors. In n-type material, electrons are the majority carriers and holes (from thermal bond-breaking) are the minority carriers.

p-type: dope with a trivalent (group III) element such as boron, aluminium, gallium or indium. It can complete only three bonds, leaving a vacancy (a hole) in the fourth. It readily accepts an electron from a neighbour, so it is an acceptor, with an acceptor level just above the valence band. In p-type material, holes are the majority carriers and electrons are the minority carriers. Both kinds of extrinsic semiconductor are electrically neutral overall, because neutral atoms are added.

Kinds of semiconductor

  • Intrinsic (pure Si or Ge)
    • Electrons = holes
    • Carriers made by heat only
  • n-type (add P, As or Sb)
    • Donor level just below CB
    • Majority: electrons
    • Minority: holes
  • p-type (add B, Al, Ga or In)
    • Acceptor level just above VB
    • Majority: holes
    • Minority: electrons

Pentavalent dopant → donor → n-type, electrons majority. Trivalent dopant → acceptor → p-type, holes majority. E_g(Si) = 1.1 eV, E_g(Ge) = 0.7 eV.

Worked example 1: which material?

Three solids have band gaps of 0.7 eV, 5.5 eV and zero (overlapping bands). Step 1: a gap under 3 eV is a semiconductor, so 0.7 eV (germanium-like) is a semiconductor. Step 2: about 5 to 6 eV is an insulator, so 5.5 eV is an insulator (diamond is an example). Step 3: overlapping bands mean a conductor. Step 4: heating raises the conductivity only of the semiconductor noticeably, because more electrons cross its narrow gap.

Worked example 2: the energy needed to free a carrier

Compare the energy needed to create a carrier in pure silicon with that needed to free a donor electron (take 0.05 eV for a donor in silicon) and with the thermal energy kT at room temperature (about 0.025 eV). Step 1: intrinsic: 1.1 eV, which is 1.1/0.025 = 44 times kT, so few bonds break. Step 2: donor: 0.05 eV is only 2 times kT, so almost all donors are ionised at room temperature. Conclusion: doping, not heating, controls the carrier concentration in devices.

Key takeaways

  • Closely packed atoms turn sharp levels into valence and conduction bands separated by E_g.
  • Insulator: wide gap (about 6 eV); conductor: overlapping bands; semiconductor: narrow gap (under 3 eV) and negative temperature coefficient.
  • Intrinsic: n_e = n_h; a hole behaves as a positive carrier.
  • Group V dopants give n-type (electrons majority); group III dopants give p-type (holes majority).

Check your understanding

  1. 1. A semiconductor's resistance as its temperature rises:

    1. Increases, like a metal
    2. Decreases
    3. Stays the same
    4. Becomes zero at 100 °C
    Show answer

    Answer: B. Heating breaks more covalent bonds, giving more electrons and holes, so conductivity rises and resistance falls: a negative temperature coefficient of resistance.

  2. 2. Germanium doped with arsenic is:

    1. p-type, with holes as majority carriers
    2. intrinsic
    3. n-type, with electrons as majority carriers
    4. an insulator
    Show answer

    Answer: C. Arsenic is pentavalent (group V). Its fifth electron is easily freed, so it is a donor and the material is n-type with electrons as majority carriers.

  3. 3. The donor energy level in an n-type semiconductor lies:

    1. Just below the conduction band
    2. Just above the valence band
    3. In the middle of the valence band
    4. Above the conduction band
    Show answer

    Answer: A. The loosely held fifth electron of a donor has energy just below the conduction band edge, so a very small energy lifts it into the conduction band.

  4. 4. In an intrinsic semiconductor at room temperature:

    1. There are no holes
    2. Holes outnumber electrons
    3. Electrons outnumber holes
    4. The numbers of free electrons and holes are equal
    Show answer

    Answer: D. Each broken bond produces one free electron and one hole, so in pure material n_e = n_h.

  5. 5. The forbidden energy gap of an insulator is of the order of:

    1. 0.01 eV
    2. 6 eV
    3. 0.7 eV
    4. Zero
    Show answer

    Answer: B. Insulators have a wide gap, about 6 eV, so electrons cannot reach the conduction band. 0.7 eV is germanium's gap; zero gap means overlapping bands (a conductor).

Privacy · Terms · Refunds · Delivery