Revision notes

Unit 3 Magnetism and magnetic effects of electric current: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Earth's magnetism, bar magnets and the magnetic dipole

B_H = B_E cos I, B_V = B_E sin I, tan I = B_V/B_H. p_m = q_m(2l). Short magnet: B_axial = (μ₀/4π)2p_m/r³, B_equatorial = (μ₀/4π)p_m/r³. τ = p_mB sin θ; U = −p_mB cos θ.

Electric dipole and magnetic dipole

  • Electric dipole
    • p = q(2a), from −q to +q
    • Far field ∝ 1/r³
    • τ⃗ = p⃗ × E⃗, U = −p⃗·E⃗
    • Flux through a closed surface = Q_encl/ε₀
  • Magnetic dipole
    • p_m = q_m(2l), from S to N
    • Far field ∝ 1/r³
    • τ⃗ = p⃗_m × B⃗, U = −p⃗_m·B⃗
    • Flux through any closed surface = 0 (no monopoles)
  • The Earth's field is described by declination, dip and B_H; at the magnetic equator I = 0°, at the poles I = 90°.
  • Magnetic moment p_m = q_m × 2l, from S to N; there are no isolated poles.
  • Flux Φ = BA cos θ in webers; through a closed surface it is zero.
  • A short magnet's axial field is twice its equatorial field at the same distance.
  • In a uniform field a magnet feels a torque p_mB sin θ but no net force.
Read the full lesson

Lesson 2

Magnetic properties of materials and hysteresis

Magnetic susceptibility of some materials, according to the Tamil Nadu textbook (selected rows of Table 3.1)
Materialχ_m
Aluminium2.3 × 10⁻⁵
Copper−0.98 × 10⁻⁵
Diamond−2.2 × 10⁻⁵
Gold−3.6 × 10⁻⁵
Silver−2.6 × 10⁻⁵
Tungsten6.8 × 10⁻⁵
Oxygen (1 atm)2090 × 10⁻⁹
Carbon dioxide (1 atm)−2.3 × 10⁻⁹

Three kinds of magnetic material

  • Diamagnetic
    • χ_m small and negative
    • μ_r slightly less than 1
    • Weakly repelled; lines pushed out
    • χ_m nearly independent of T
    • Bismuth, copper, water
  • Paramagnetic
    • χ_m small and positive
    • μ_r slightly more than 1
    • Weakly attracted
    • Curie's law: χ_m = C/T
    • Aluminium, platinum, oxygen
  • Ferromagnetic
    • χ_m large and positive
    • μ_r very large
    • Strongly attracted; domains
    • Paramagnetic above T_C: χ_m = C/(T − T_C)
    • Iron, nickel, cobalt

One cycle of magnetisation round a hysteresis loop

  1. Saturation H increased: B rises to its maximum.
  2. Retentivity H reduced to zero: B is still positive (residual magnetism).
  3. Coercivity Reverse H applied: B falls to zero.
  4. Reverse saturation Larger reverse H: B reaches its negative maximum.
  5. Back through zero H reduced and then made positive again: the loop closes.

Then back to step 1: Saturation

Soft and hard ferromagnetic materials
PropertySoft (e.g. soft iron, mumetal, stalloy)Hard (e.g. carbon steel, alnico, lodestone)
Magnetisation after the field is removedDisappearsPersists
Loop area and hysteresis lossSmall, less lossLarge, more loss
RetentivityLowHigh
CoercivityLowHigh
Susceptibility and permeabilityHighLow
UsesElectromagnets, solenoid and transformer coresPermanent magnets

B = μ₀(H + M); χ_m = M/H; μ_r = 1 + χ_m. Curie: χ_m = C/T. Curie-Weiss: χ_m = C/(T − T_C). Hysteresis loss per cycle per unit volume = loop area.

  • M is moment per unit volume; χ_m = M/H; μ_r = 1 + χ_m.
  • Diamagnets: χ_m < 0, repelled; paramagnets: small χ_m > 0; ferromagnets: large χ_m > 0 with domains.
  • Paramagnetic χ_m ∝ 1/T; a ferromagnet becomes paramagnetic above its Curie temperature.
  • Hysteresis loop: retentivity at H = 0, coercivity at B = 0, loss = loop area.
  • Soft materials for electromagnets and transformers, hard materials for permanent magnets.
Read the full lesson

Lesson 3

Magnetic effects of current: Biot-Savart law, tangent galvanometer and current loops

Coulomb's law and the Biot-Savart law
FeatureElectric field (Coulomb)Magnetic field (Biot-Savart)
SourceA scalar source: charge qA vector source: current element I dl⃗
DirectionAlong the line joining source and pointPerpendicular to both I dl⃗ and r̂
AngleDoes not depend on an angleDepends on sin θ
Common featuresInverse square; superposition; linear in the sourceInverse square; superposition; linear in the source

dB = (μ₀/4π) I dl sin θ/r². Long wire: B = μ₀I/(2πa). Coil centre: B = μ₀NI/(2R). Tangent law: B = B_H tan θ. Loop moment p_m = IA. Electron: μ_L/L = e/2m.

  • A current makes a field: circles round a straight wire, nearly uniform near the centre of a coil.
  • Biot-Savart: each current element contributes a field ∝ I dl sin θ/r², perpendicular to both dl⃗ and r̂.
  • Long wire μ₀I/(2πa); coil centre μ₀NI/(2R); on the axis μ₀NIR²/[2(R² + z²)^(3/2)].
  • The tangent galvanometer uses B = B_H tan θ with the coil in the magnetic meridian.
  • A current loop is a dipole of moment IA; an orbiting electron has μ_L = (e/2m)L, and the Bohr magneton is eh/(4πm).
Read the full lesson

Lesson 4

Ampere's circuital law, solenoid, toroid and the Lorentz force

How the cyclotron accelerates a positive ion

  1. Accelerated across the gap The ion is pulled towards the dee that is negative at that moment.
  2. Semicircle inside a dee No electric field inside the metal dee; the magnetic field bends the ion through 180°.
  3. Voltage reverses Timed so that when the ion returns to the gap the other dee is now negative.
  4. Faster, wider path Each crossing adds energy; r = mv/(qB) grows, so the ion spirals outward.

Then back to step 1: Accelerated across the gap

∮B⃗·dl⃗ = μ₀I_enclosed. Solenoid B = μ₀nI; toroid B = μ₀NI/(2πr) inside, 0 elsewhere. F⃗ = q(E⃗ + v⃗ × B⃗). r = mv/(qB), T = 2πm/(qB), f = qB/(2πm). Velocity selector v = E/B. Cyclotron KE = q²B²r²/(2m).

  • Ampere's law gives B for symmetric currents: wire, solenoid, toroid.
  • Inside a long solenoid B = μ₀nI, uniform; a toroid's field stays inside its windings.
  • The magnetic force is perpendicular to the velocity, so it does no work and keeps the speed constant.
  • Circle of radius mv/(qB) with a period independent of speed; a helix if v has a component along B.
  • Crossed E and B select v = E/B; the cyclotron needs f_osc = qB/(2πm).
Read the full lesson

Lesson 5

Force on conductors, torque on a current loop and the moving coil galvanometer

Galvanometer conversions

  • Ammeter
    • Low shunt S in parallel
    • S = I_gR_g/(I − I_g)
    • Connected in series
    • Ideal resistance: zero
  • Voltmeter
    • High resistance R_h in series
    • R_h = V/I_g − R_g
    • Connected in parallel
    • Ideal resistance: infinite

F = BIl sin θ (Fleming's left hand rule). Parallel wires: F/l = μ₀I₁I₂/(2πr). Coil: τ = NIAB sin θ. Galvanometer: I = (K/NAB)θ; I_S = NAB/K; V_S = I_S/R_g. Shunt S = I_gR_g/(I − I_g); series R_h = V/I_g − R_g.

  • A conductor in a field feels F = BIl sin θ, given in direction by Fleming's left hand rule.
  • Like parallel currents attract, unlike repel; 2 × 10⁻⁷ N m⁻¹ for 1 A in wires 1 m apart.
  • A coil feels τ = NIAB sin θ, largest when its plane is along the field.
  • In a moving coil galvanometer the radial field makes the deflection proportional to the current.
  • Ammeter: galvanometer + low shunt in parallel. Voltmeter: galvanometer + high resistance in series.
Read the full lesson

Privacy · Terms · Refunds · Delivery