- Practice
- About 27 min
- 5 practice questions
Ampere's circuital law, solenoid, toroid and the Lorentz force
Apply Ampere's circuital law to a long wire, a solenoid and a toroid, use the Lorentz force F = q(E + v × B) for charges in fields, and explain circular and helical paths, the velocity selector, the mass spectrometer and the cyclotron.
If something looks wrong, please tell us.
By the end of this lesson you can
- State Ampere's circuital law, ∮B⃗·dl⃗ = μ₀I_enclosed.
- Use it to find the field of a long wire, B = μ₀nI inside a solenoid and the field of a toroid.
- Write the Lorentz force F⃗ = q(E⃗ + v⃗ × B⃗) and define the tesla.
- Show that a magnetic force does no work, and find the radius r = mv/(qB), period and frequency of circular motion.
- Explain helical paths, the velocity selector v = E/B and the mass spectrometer.
- Describe the construction, working, resonance condition and limitations of the cyclotron.
For charge distributions with symmetry, Gauss law gives the electric field quickly. Ampere's circuital law plays the same role for magnetic fields of symmetric current arrangements. The second half of this lesson looks at what a magnetic field does to a moving charge: it bends the path without changing the speed, which is the basis of mass spectrometers and particle accelerators.
Ampere's circuital law
The line integral of the magnetic field round any closed loop equals μ₀ times the net current enclosed by the loop: ∮B⃗·dl⃗ = μ₀I_enclosed. The closed path (an Amperian loop) can be of any shape; the result depends only on the current threading it. We choose a loop along which B is either constant and parallel to dl⃗, or perpendicular to dl⃗.
Long straight wire. By symmetry the field lines are circles round the wire, with the same B at all points a distance r away. Take a circular Amperian loop of radius r: B⃗ is along dl⃗ everywhere, so ∮B dl = B × 2πr = μ₀I, giving B = μ₀I/(2πr), the same as from the Biot-Savart law.
Solenoid
A solenoid is a long wire wound closely as a helix. Its field is the superposition of the fields of all its turns. Inside, the field is nearly uniform and parallel to the axis; outside, it is negligibly small. One end acts as a north pole and the other as a south pole, so a solenoid behaves like a bar magnet. If the fingers of the right hand curl along the current, the thumb gives the field direction inside.
Consider a long, closely wound solenoid of length L with N turns. Take a rectangular Amperian loop abcd with side ab (length h) inside along the axis and side cd outside. ∮B⃗·dl⃗ splits into four parts: along bc and da the field is perpendicular to dl⃗ (or zero outside), so these give zero; along cd outside, B = 0; only ab contributes, Bh. Taking the loop as long as the solenoid (h = L), the enclosed current is NI, so BL = μ₀NI, i.e. B = μ₀NI/L = μ₀nI, where n = N/L is the number of turns per unit length. The field inside is constant for a given current. A solenoid is an electromagnet that can be switched on and off, and an iron core inside it greatly strengthens its field because the iron becomes magnetised. MRI scanners place the patient inside a large solenoid made of superconducting wire, which carries a large current to make a strong field.
Toroid
A toroid is a solenoid bent into a closed ring. Use circular Amperian loops concentric with the ring. (a) Open space inside the ring (point P): the loop encloses no current, so B_P = 0. (b) Outside the ring (point Q): each turn carries current up through the loop once and down once, so the net enclosed current is zero and B_Q = 0. (c) Within the windings (point S, loop radius r): the loop is threaded by all N turns, so B × 2πr = μ₀NI and B = μ₀NI/(2πr) = μ₀nI, with n = N/(2πr). The field is confined entirely inside the core of the toroid.
Worked example 1: solenoid and toroid
(a) A solenoid 0.50 m long has 1000 turns and carries 3.0 A. n = 1000/0.50 = 2000 m⁻¹, so B = μ₀nI = 4π × 10⁻⁷ × 2000 × 3.0 ≈ 7.54 × 10⁻³ T. Doubling the length with the same N halves B; doubling both N and L leaves B unchanged; doubling N for the same L doubles B. (b) A toroid of 500 turns and mean radius 0.10 m carries 2.0 A. B = μ₀NI/(2πr) = (2 × 10⁻⁷ × 500 × 2.0)/0.10 = 2.0 × 10⁻³ T inside the windings, and zero in the hole and outside.
The Lorentz force
A charge at rest in a magnetic field feels no magnetic force; a moving charge does. The magnetic force on charge q moving with velocity v⃗ in field B⃗ is F⃗_m = q(v⃗ × B⃗), magnitude F_m = qvB sin θ. With an electric field as well, the total force is F⃗ = q(E⃗ + v⃗ × B⃗), the Lorentz force. The magnetic force is proportional to B, v, sin θ and q; it is perpendicular to both v⃗ and B⃗; it is opposite for a negative charge; and it is zero when the charge moves along the field. This defines the tesla: the field is 1 T when a charge of 1 C moving at 1 m s⁻¹ perpendicular to it feels 1 N, so 1 T = 1 N s C⁻¹ m⁻¹ = 1 N A⁻¹ m⁻¹.
The magnetic force does no work. Since F⃗_m is always perpendicular to v⃗, F⃗_m·v⃗ = 0, so the power F⃗·v⃗ = 0 and W = ∫F⃗·v⃗ dt = 0. By the work-energy theorem the kinetic energy, and hence the speed, stays constant. The magnetic force changes only the direction of motion.
Motion of a charge in a uniform magnetic field
If a charge enters a uniform field with v⃗ perpendicular to B⃗, the force qvB, always perpendicular to the velocity, acts as a centripetal force: qvB = mv²/r. So the path is a circle of radius r = mv/(qB) = p/(qB). The time for one revolution is T = 2πr/v = 2πm/(qB), the cyclotron period, and the frequency is f = qB/(2πm) (angular frequency ω = qB/m), the cyclotron or gyro-frequency. T and f depend only on the specific charge q/m and on B, not on the speed or radius: a faster particle moves on a bigger circle in the same time. If the velocity makes an angle with B⃗, its component along B⃗ is unchanged while the perpendicular component goes round in a circle, so the path is a helix round the field lines; such paths are seen in a cloud chamber. The distance moved along the field in one revolution is the pitch, v_parallel × T.
Worked example 2: a proton in a magnetic field
A proton (m = 1.67 × 10⁻²⁷ kg, q = 1.6 × 10⁻¹⁹ C) moves at 2.0 × 10⁶ m s⁻¹ perpendicular to a 0.50 T field. Force: F = qvB = 1.6 × 10⁻¹⁹ × 2.0 × 10⁶ × 0.50 = 1.6 × 10⁻¹³ N. Radius: r = mv/(qB) = (1.67 × 10⁻²⁷ × 2.0 × 10⁶)/(1.6 × 10⁻¹⁹ × 0.50) = (3.34 × 10⁻²¹)/(8.0 × 10⁻²⁰) ≈ 0.042 m = 4.2 cm. Period: T = 2πm/(qB) = (6.28 × 1.67 × 10⁻²⁷)/(8.0 × 10⁻²⁰) ≈ 1.31 × 10⁻⁷ s, so f ≈ 7.6 MHz.
Crossed fields: the velocity selector and mass spectrometer
Between the plates of a capacitor (uniform E⃗), add a uniform B⃗ perpendicular to E⃗ and to the beam. For a positive charge the electric force qE acts one way (say down) and the magnetic force qvB the other way (up). The particle passes straight through, undeflected, when qE = qvB, i.e. v = E/B. Faster particles are bent one way and slower ones the other. Such an arrangement picks out particles of one speed, whatever their mass or charge: a velocity selector. In a Bainbridge mass spectrograph, ions of one speed from a velocity selector enter a region of magnetic field alone and travel semicircles of radius r = mv/(qB). Ions of the same charge but different masses (isotopes) land at different points, turning a tiny difference in mass into a measurable separation of 2r₂ − 2r₁. Mass spectrometers are used in medicine (for example, to monitor respiratory gases during anaesthesia), space science, geology and biology.
Worked example 3: velocity selector
An electric field of 3.0 × 10⁴ V m⁻¹ and a magnetic field of 0.020 T are crossed. Particles go straight through when v = E/B = (3.0 × 10⁴)/0.020 = 1.5 × 10⁶ m s⁻¹. The selected speed is the same for electrons, protons or any ion.
The cyclotron
The cyclotron, invented by E. O. Lawrence and M. S. Livingston, accelerates charged particles to high kinetic energy. Principle: a charge moving perpendicular to a magnetic field moves in a circle with a period that does not depend on its speed. Construction: two hollow D-shaped metal boxes, the dees, sit in an evacuated chamber in a uniform magnetic field (from an electromagnet) normal to their plane, with a gap between them. An ion source S is at the centre of the gap, and the dees are connected to a high-frequency alternating voltage.
How the cyclotron accelerates a positive ion
- Accelerated across the gap The ion is pulled towards the dee that is negative at that moment.
- Semicircle inside a dee No electric field inside the metal dee; the magnetic field bends the ion through 180°.
- Voltage reverses Timed so that when the ion returns to the gap the other dee is now negative.
- Faster, wider path Each crossing adds energy; r = mv/(qB) grows, so the ion spirals outward.
Then back to step 1: Accelerated across the gap
Near the edge the ion is pulled out by a deflector plate and directed at a target. The key requirement is the resonance condition: the frequency of the ion's circular motion must equal the frequency of the oscillator, f_osc = qB/(2πm). The final kinetic energy at radius r is KE = ½mv² = q²B²r²/(2m). Limitations: (a) the speed of the ions is limited; (b) electrons cannot be accelerated (they quickly become too fast for the resonance condition to hold); (c) uncharged particles such as neutrons cannot be accelerated. Deuterons (one proton plus one neutron) can be, as they carry the proton's charge; the textbook notes that high-energy neutrons produced by firing deuterons at a beryllium target are used in fast-neutron cancer therapy.
Worked example 4: a proton cyclotron
A cyclotron with B = 1.5 T and dee radius 0.50 m accelerates protons. Oscillator frequency: f = qB/(2πm) = (1.6 × 10⁻¹⁹ × 1.5)/(6.28 × 1.67 × 10⁻²⁷) = (2.4 × 10⁻¹⁹)/(1.05 × 10⁻²⁶) ≈ 2.3 × 10⁷ Hz = 23 MHz. Final energy: KE = q²B²r²/(2m) = (2.56 × 10⁻³⁸ × 2.25 × 0.25)/(3.34 × 10⁻²⁷) = (1.44 × 10⁻³⁸)/(3.34 × 10⁻²⁷) ≈ 4.3 × 10⁻¹² J, about 27 MeV (dividing by 1.6 × 10⁻¹³ J per MeV).
∮B⃗·dl⃗ = μ₀I_enclosed. Solenoid B = μ₀nI; toroid B = μ₀NI/(2πr) inside, 0 elsewhere. F⃗ = q(E⃗ + v⃗ × B⃗). r = mv/(qB), T = 2πm/(qB), f = qB/(2πm). Velocity selector v = E/B. Cyclotron KE = q²B²r²/(2m).
Key takeaways
- Ampere's law gives B for symmetric currents: wire, solenoid, toroid.
- Inside a long solenoid B = μ₀nI, uniform; a toroid's field stays inside its windings.
- The magnetic force is perpendicular to the velocity, so it does no work and keeps the speed constant.
- Circle of radius mv/(qB) with a period independent of speed; a helix if v has a component along B.
- Crossed E and B select v = E/B; the cyclotron needs f_osc = qB/(2πm).
Check your understanding
-
1. The current in a long solenoid is kept the same, but it is rewound with twice as many turns over the same length. The field inside:
- halves
- stays the same
- doubles
- becomes four times
Show answer
Answer: C. B = μ₀nI with n = N/L. Doubling N for the same L doubles n and therefore doubles B.
-
2. For a toroid carrying a current, the magnetic field in the open space enclosed by the ring (the hole) is:
- μ₀nI
- zero
- μ₀NI/(2πr)
- twice the field in the windings
Show answer
Answer: B. A circular Amperian loop in the hole encloses no current, so ∮B⃗·dl⃗ = 0 and, by symmetry, B = 0 there. The field μ₀NI/(2πr) exists only within the windings.
-
3. The work done by the magnetic force on a charged particle moving in a uniform magnetic field is:
- qvB times the distance moved
- positive if the charge is positive
- equal to the gain in kinetic energy qvB
- zero
Show answer
Answer: D. F⃗ = q(v⃗ × B⃗) is always perpendicular to v⃗, so F⃗·v⃗ = 0 and no work is done. The speed and kinetic energy stay constant; only the direction changes.
-
4. A charged particle moves in a circle perpendicular to a uniform magnetic field. If its speed is doubled, then:
- the radius doubles and the period stays the same
- the radius and the period both double
- the radius stays the same and the period halves
- the radius halves and the period doubles
Show answer
Answer: A. r = mv/(qB) ∝ v, so the radius doubles. T = 2πm/(qB) does not depend on v, so the period is unchanged.
-
5. In a velocity selector E = 1.0 × 10⁴ V m⁻¹ and B = 0.050 T. The speed of the particles that pass undeflected is:
- 5.0 × 10² m s⁻¹
- 2.0 × 10⁵ m s⁻¹
- 5.0 × 10⁵ m s⁻¹
- 2.0 × 10³ m s⁻¹
Show answer
Answer: B. Undeflected when qE = qvB, so v = E/B = (1.0 × 10⁴)/0.050 = 2.0 × 10⁵ m s⁻¹.
Sign in to keep track of the lessons you finish.