- Practice
- About 26 min
- 5 practice questions
Magnetic effects of current: Biot-Savart law, tangent galvanometer and current loops
Use the right-hand rules, state the Biot-Savart law and find the field of a long straight wire and of a circular coil, apply the tangent law in the tangent galvanometer, and treat a current loop and an orbiting electron as magnetic dipoles.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe Oersted's experiment and the field patterns of a straight wire and a circular coil.
- Use the right-hand thumb rule and Maxwell's right-hand cork screw rule.
- State the Biot-Savart law and compare it with Coulomb's law.
- Derive B = μ₀I/(2πa) for a long wire and B = μ₀NIR²/[2(R² + z²)^(3/2)] on the axis of a coil.
- Explain the tangent law and the tangent galvanometer, I = (2RB_H/μ₀N) tan θ.
- Show that a current loop has moment p_m = IA and find the gyromagnetic ratio e/2m and the Bohr magneton.
In 1820, while preparing a lecture, Hans Christian Oersted noticed that a current in a wire deflected a nearby compass needle, and that reversing the current reversed the deflection. A current produces a magnetic field. This discovery joined electricity and magnetism into one subject, electromagnetism.
Field patterns and right-hand rules
Around a long straight current-carrying wire, the field lines traced with a compass are concentric circles centred on the wire. A larger current gives a stronger field, and the field gets weaker farther from the wire. Around a circular coil the lines are circles near the wire, but near the centre they are nearly parallel: the field there is almost uniform. More current or more turns give a stronger field, and the direction of the current decides which face behaves as a north pole.
- Right-hand thumb rule: hold the conductor in the right hand with the thumb along the current; the curled fingers show the direction of the field lines. For a coil, curl the fingers along the current; the thumb shows the field (and the magnetic moment) through the coil.
- Maxwell's right-hand cork screw rule: a right-handed screw advanced in the direction of the current must be turned in the direction of the field lines.
- End rule: looking at a face of a coil, an anticlockwise current makes that face a north pole and a clockwise current makes it a south pole.
The Biot-Savart law
Soon after Oersted's discovery, Jean-Baptiste Biot and Félix Savart measured the field of current-carrying wires. The field dB produced at a point P by a small length element dl carrying current I, at distance r from P, varies (i) directly as I, (ii) directly as dl, (iii) directly as sin θ, where θ is the angle between dl⃗ and r⃗, and (iv) inversely as r². So dB = (μ₀/4π) I dl sin θ/r², or in vector form dB⃗ = (μ₀/4π) I dl⃗ × r̂/r². dB⃗ is perpendicular to both the current element and r̂. The total field is found by superposition, integrating over the whole conductor. A point on the line of the element (θ = 0°) gets no field from it; a point perpendicular to it (θ = 90°) gets the most. Current is a scalar, but a current element I dl⃗ is treated as a vector along the flow.
| Feature | Electric field (Coulomb) | Magnetic field (Biot-Savart) |
|---|---|---|
| Source | A scalar source: charge q | A vector source: current element I dl⃗ |
| Direction | Along the line joining source and point | Perpendicular to both I dl⃗ and r̂ |
| Angle | Does not depend on an angle | Depends on sin θ |
| Common features | Inverse square; superposition; linear in the source | Inverse square; superposition; linear in the source |
Field of a long straight conductor
Let P be at perpendicular distance a from a long straight wire carrying current I. Every element of the wire gives a field at P in the same direction (into the page, say), so only the magnitudes need adding. Let φ be the angle that the line from an element to P makes with the perpendicular OP. From the geometry, dl sin θ = r dφ and r = a/cos φ, so dB = (μ₀I/4πa) cos φ dφ. Integrating from −φ₁ to φ₂ gives B = (μ₀I/4πa)(sin φ₁ + sin φ₂). For an infinitely long wire φ₁ = φ₂ = 90°, so B = μ₀I/(2πa). The field falls as 1/a and circles the wire.
Worked example 1: field near a wire
A long wire carries 10 A. At 5.0 cm from it, B = μ₀I/(2πa) = (4π × 10⁻⁷ × 10)/(2π × 0.050) = (2 × 10⁻⁷ × 10)/0.050 = 4.0 × 10⁻⁵ T. This is of the same order as the Earth's magnetic field (a few times 10⁻⁵ T), which is why such a wire noticeably deflects a nearby compass.
Field on the axis of a circular coil
A circular loop of radius R carries current I. Find the field at P on its axis, a distance z from the centre O. Take two diametrically opposite elements dl at C and D. Each is perpendicular to the line joining it to P (θ = 90°), at distance r = √(R² + z²), so each gives dB = (μ₀/4π) I dl/(R² + z²). Each dB is perpendicular to its line CP or DP; their components perpendicular to the axis cancel in pairs, while the components along the axis, dB sin φ with sin φ = R/√(R² + z²), add. Integrating round the loop (total length 2πR): B = (μ₀/4π) × I R × 2πR/(R² + z²)^(3/2). For N turns: B = μ₀NIR²/[2(R² + z²)^(3/2)] along the axis. At the centre (z = 0): B = μ₀NI/(2R). If a loop carries current half one way and half the other (for instance two semicircles carrying current in opposite senses about the centre), the fields at the centre cancel.
Worked example 2: a circular coil
A coil of 50 turns and radius 0.10 m carries 2.0 A. (a) Centre: B = μ₀NI/(2R) = (4π × 10⁻⁷ × 50 × 2.0)/(0.20) = 4π × 10⁻⁷ × 500 ≈ 6.28 × 10⁻⁴ T. (b) On the axis at z = 0.10 m: R² + z² = 0.02 m², and (R² + z²)^(3/2) = 2^(3/2) R³, so the field is the centre value divided by 2^(3/2) ≈ 2.83: B ≈ 6.28 × 10⁻⁴/2.83 ≈ 2.22 × 10⁻⁴ T.
Tangent law and the tangent galvanometer
Tangent law: a freely suspended magnetic needle in two mutually perpendicular uniform fields B and B_H comes to rest along their resultant, making angle θ with B_H such that B = B_H tan θ. The tangent galvanometer (TG) is a moving-magnet galvanometer that uses this law. Construction: a copper coil of several turns (laboratory sets commonly have 2, 5 and 50 turns, of different wire thickness, for different current ranges) is wound on a vertical non-magnetic frame of brass or wood, mounted on a turntable with three levelling screws. At the centre is a compass box with a small pivoted needle whose centre coincides with the coil's centre; a thin aluminium pointer at right angles to the needle moves over a circular scale graduated 0° to 90° in each quadrant, with a mirror below it to avoid parallax.
- Keep magnets and magnetic materials away from the instrument.
- Level the base with a spirit level so that the needle is horizontal and the coil vertical.
- Rotate the coil about its vertical axis until its plane is parallel to the needle, i.e. the coil lies in the magnetic meridian.
- Rotate the compass box alone so that the pointer reads 0°-0°.
Theory: with no current the needle lies along B_H. A current I in the coil produces B = μ₀NI/(2R) at the centre, perpendicular to the coil's plane, so perpendicular to B_H. The needle deflects through θ with B = B_H tan θ. Hence μ₀NI/(2R) = B_H tan θ, so I = (2RB_H/μ₀N) tan θ, and equally B_H = μ₀NI/(2R tan θ), which lets the TG measure the Earth's horizontal field.
Worked example 3: tangent galvanometer
A TG has 50 turns of radius 0.10 m, and B_H = 3.6 × 10⁻⁵ T (an assumed value). Find the current that gives a deflection of 45°. I = 2RB_H tan θ/(μ₀N) = (2 × 0.10 × 3.6 × 10⁻⁵ × 1)/(4π × 10⁻⁷ × 50) = (7.2 × 10⁻⁶)/(6.28 × 10⁻⁵) ≈ 0.115 A. At 45° the coil's field equals B_H.
A current loop is a magnetic dipole
Far along the axis of a loop (z ≫ R), the coil formula becomes B = μ₀IR²/(2z³) = (μ₀/4π)(2IπR²/z³) = (μ₀/4π)(2IA/z³). This has exactly the form of the axial field of a short bar magnet, (μ₀/4π)(2p_m/r³). So a current loop behaves as a magnetic dipole of moment p⃗_m = IA⃗: current times area, directed along the thumb when the right-hand fingers curl with the current.
An orbiting electron. An electron (charge −e, mass m) moving with speed v in a circle of radius R is a tiny current loop. Its period is T = 2πR/v, so the current is I = −e/T = −ev/(2πR), and its magnetic moment is μ_L = IA = −(ev/2πR)(πR²) = −evR/2. Its orbital angular momentum is L = mvR. Hence μ⃗_L = −(e/2m)L⃗: the moment is opposite to the angular momentum, and the ratio μ_L/L = e/2m, the gyromagnetic ratio, is a constant (about 8.8 × 10¹⁰ C kg⁻¹). By Bohr's rule L = nh/(2π), so μ_L = n(eh/4πm). The smallest value (n = 1), μ_B = eh/(4πm) ≈ 9.27 × 10⁻²⁴ A m², is the Bohr magneton, the natural unit of atomic magnetic moments.
Worked example 4: moment of a loop and of an electron orbit
(a) A circular loop of radius 5.0 cm carries 2.0 A. A = π(0.050)² ≈ 7.85 × 10⁻³ m², so p_m = IA ≈ 1.57 × 10⁻² A m². (b) Gyromagnetic ratio of the electron: e/2m = (1.6 × 10⁻¹⁹)/(2 × 9.1 × 10⁻³¹) ≈ 8.8 × 10¹⁰ C kg⁻¹. (c) Bohr magneton: eh/(4πm) = (1.6 × 10⁻¹⁹ × 6.63 × 10⁻³⁴)/(4 × 3.14 × 9.1 × 10⁻³¹) = (1.061 × 10⁻⁵²)/(1.143 × 10⁻²⁹) ≈ 9.3 × 10⁻²⁴ A m².
dB = (μ₀/4π) I dl sin θ/r². Long wire: B = μ₀I/(2πa). Coil centre: B = μ₀NI/(2R). Tangent law: B = B_H tan θ. Loop moment p_m = IA. Electron: μ_L/L = e/2m.
Key takeaways
- A current makes a field: circles round a straight wire, nearly uniform near the centre of a coil.
- Biot-Savart: each current element contributes a field ∝ I dl sin θ/r², perpendicular to both dl⃗ and r̂.
- Long wire μ₀I/(2πa); coil centre μ₀NI/(2R); on the axis μ₀NIR²/[2(R² + z²)^(3/2)].
- The tangent galvanometer uses B = B_H tan θ with the coil in the magnetic meridian.
- A current loop is a dipole of moment IA; an orbiting electron has μ_L = (e/2m)L, and the Bohr magneton is eh/(4πm).
Check your understanding
-
1. A long straight wire carries 4.0 A. The magnetic field 2.0 cm from it is:
- 4.0 × 10⁻⁵ T
- 2.0 × 10⁻⁷ T
- 8.0 × 10⁻⁵ T
- 4.0 × 10⁻⁷ T
Show answer
Answer: A. B = μ₀I/(2πa) = 2 × 10⁻⁷ × 4.0/0.020 = (8.0 × 10⁻⁷)/0.020 = 4.0 × 10⁻⁵ T.
-
2. According to the Biot-Savart law, a current element produces no magnetic field at a point that lies:
- perpendicular to the element
- along the line of the element itself
- very close to the element on its side
- at 45° to the element
Show answer
Answer: B. dB ∝ sin θ, where θ is the angle between dl⃗ and r⃗. For a point on the line of the element, θ = 0° (or 180°), sin θ = 0 and dB = 0.
-
3. Both the number of turns and the radius of a circular coil are doubled, with the same current. The field at its centre:
- doubles
- halves
- becomes four times
- stays the same
Show answer
Answer: D. B = μ₀NI/(2R). Doubling N doubles B and doubling R halves it, so B is unchanged.
-
4. The ratio of the orbital magnetic moment to the orbital angular momentum of an electron (charge e, mass m) is:
- e/m
- 2e/m
- e/2m
- m/2e
Show answer
Answer: C. μ_L = evR/2 and L = mvR, so μ_L/L = e/(2m), the gyromagnetic ratio. The moment is opposite to L because the electron is negative.
-
5. In a tangent galvanometer the needle deflects through 45°. This means that:
- the field of the coil equals the horizontal component of the Earth's field
- the current is zero
- the coil is not in the magnetic meridian
- the Earth's field is zero
Show answer
Answer: A. By the tangent law, B = B_H tan θ. At θ = 45°, tan θ = 1, so B = B_H: the coil's field equals the Earth's horizontal field.
Sign in to keep track of the lessons you finish.