• Practice
  • About 25 min
  • 5 practice questions

Earth's magnetism, bar magnets and the magnetic dipole

Use the elements of the Earth's field (declination, dip, B_H), describe bar magnets, magnetic moment and flux, apply Coulomb's inverse square law of magnetism, and find the axial and equatorial fields, torque and potential energy of a magnetic dipole.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define declination, dip and the horizontal component of the Earth's field and use B_H = B_E cos I, B_V = B_E sin I.
  • Define pole strength, magnetic dipole moment p_m = q_m(2l) and magnetic flux.
  • State the properties of bar magnets and magnetic field lines.
  • Apply Coulomb's inverse square law of magnetism, F = (μ₀/4π)q_mAq_mB/r².
  • Find the field of a short bar magnet on its axial and equatorial lines.
  • Use τ⃗ = p⃗_m × B⃗ and U = −p⃗_m·B⃗.

Magnets are everywhere in modern life: in motors, cycle dynamos, loudspeakers, headphones, mobile phones, laptop hard discs, refrigerator doors, generators and MRI scanners. The word magnetism comes from the iron ore magnetite (Fe₃O₄). Some birds even sense the Earth's magnetic field and use it to navigate. Electricity and magnetism were long thought to be separate, until in 1820 H. C. Oersted saw a compass needle deflect near a current-carrying wire. This unit first studies magnets and then the magnetic effects of steady currents.

The Earth's magnetic field

A freely suspended magnet comes to rest roughly along the geographic north-south line. The north pole of a compass needle points towards the Earth's magnetic south pole, which lies near the geographic north pole. The study of the Earth's magnetic field is geomagnetism (terrestrial magnetism). Some terms: the geographic meridian is the vertical plane through the Earth's axis of rotation; the magnetic axis joins the Earth's magnetic poles; the magnetic meridian is the vertical plane through the magnetic axis; the magnetic equator is the great circle perpendicular to the magnetic axis. William Gilbert proposed in 1600 that the Earth behaves like a giant bar magnet, but the Earth's interior is too hot for a permanent magnet to keep its magnetism; no theory yet fully explains the Earth's magnetism.

Three elements describe the Earth's field at a place. (a) Declination D: the angle between the magnetic meridian and the geographic meridian. It is larger at high latitudes and small near the equator; in India it is small. (b) Dip or inclination I: the angle that the Earth's total field B_E makes with the horizontal in the magnetic meridian. (c) Horizontal component B_H of the field in the magnetic meridian. Resolving B_E: B_H = B_E cos I and B_V = B_E sin I, so tan I = B_V/B_H and B_E = √(B_H² + B_V²). At the magnetic equator the field is horizontal: I = 0°, B_H = B_E (maximum) and B_V = 0. At the magnetic poles it is vertical: I = 90°, B_H = 0 and B_V = B_E.

Near the magnetic poles, charged particles from the Sun (the solar wind) collide with gases in the upper atmosphere and make them glow: the polar lights, called aurora borealis in the north and aurora australis in the south.

Worked example 1: dip and total field

At a place B_H = 0.24 G and B_V = 0.32 G (1 G = 10⁻⁴ T). Step 1: tan I = B_V/B_H = 0.32/0.24 = 1.33, so I ≈ 53°. Step 2: B_E = √(0.24² + 0.32²) = √(0.0576 + 0.1024) = √0.16 = 0.40 G = 4.0 × 10⁻⁵ T.

Bar magnets: basic properties

Let each pole of a bar magnet have pole strength q_m, and let the poles be 2l apart. The magnetic dipole moment is p⃗_m = q_m d⃗, where d⃗ points from the south pole to the north pole and has magnitude 2l: p_m = q_m × 2l. Its unit is A m² and its direction is from S to N. Pole strength is a scalar with unit A m (or N T⁻¹). The magnetic field B⃗ at a point is the force on a unit north pole placed there, B⃗ = F⃗/q_m, with unit N A⁻¹ m⁻¹ (the tesla). A north pole is pushed along B⃗ and a south pole against it. Natural magnets such as lodestone are weak and irregular; artificial magnets are made in the shape and strength required, and a rectangular or cylindrical one is a bar magnet.

  • A freely suspended bar magnet points north-south.
  • It attracts or repels other magnets and attracts magnetic substances; the force is greatest near the ends, where iron filings cling.
  • Cutting a magnet never gives an isolated pole: each piece is a complete magnet. Isolated magnetic monopoles do not exist.
  • The two poles have equal pole strength.
  • The magnetic length (between the poles) is slightly less than the geometrical length; the textbook takes their ratio as 5/6.
  • Cut into two equal halves along its length: each half has pole strength q_m/2 and the same length, so moment p_m/2. Cut perpendicular to its length: pole strength unchanged, length halved, so again moment p_m/2.

Magnetic field lines are continuous closed curves, going from N to S outside the magnet and from S to N inside it. The tangent at any point gives the field direction; lines never cross (a compass cannot point two ways at once); they are crowded where the field is strong. A field is uniform if its magnitude and direction are the same everywhere in a region (the Earth's field over a school campus is practically uniform) and non-uniform otherwise (the field of a bar magnet).

Magnetic flux is the number of field lines crossing an area normally: Φ_B = B⃗·A⃗ = BA cos θ, or Φ_B = ∫B⃗·dA⃗ for a non-uniform field. It is a scalar; its SI unit is the weber (Wb), and 1 Wb = 10⁸ maxwell (the CGS unit). Flux per unit normal area is the magnetic flux density, measured in Wb m⁻² = tesla (T). Because there are no monopoles, every field line that enters a closed surface also leaves it, so the total flux through any closed surface is zero: ∮B⃗·dA⃗ = 0, the magnetic counterpart of Gauss law.

Coulomb's inverse square law of magnetism

Like poles repel and unlike poles attract, much as like and unlike charges do. The force between two magnetic poles is directly proportional to the product of their pole strengths and inversely proportional to the square of the distance between them: F = k q_mA q_mB/r², with k = μ₀/4π = 10⁻⁷ H m⁻¹ in free space. Here μ₀ = 4π × 10⁻⁷ H m⁻¹ is the permeability of free space (H is the henry).

Worked example 2: force between poles

Poles of strengths 20 A m and 30 A m are 5.0 cm apart in air. F = 10⁻⁷ × 20 × 30/(0.050)² = (6.0 × 10⁻⁵)/(2.5 × 10⁻³) = 0.024 N. The force is attractive if the poles are unlike and repulsive if they are alike.

Field of a magnetic dipole

Axial line. Place a unit north pole at C on the axis, a distance r from the centre O, beyond the north pole. The north pole (at distance r − l) pushes it away with (μ₀/4π)q_m/(r − l)²; the south pole (at r + l) pulls it back with (μ₀/4π)q_m/(r + l)². The net field is (μ₀/4π)q_m[1/(r − l)² − 1/(r + l)²] = (μ₀/4π)·2p_m r/(r² − l²)², along p⃗_m. For a short magnet (r ≫ l): B_axial = (μ₀/4π)(2p_m/r³), along p⃗_m (S to N).

Equatorial line. At C on the perpendicular bisector, a distance r from O, both poles are √(r² + l²) away and produce fields of equal size. Their perpendicular components cancel and their components parallel to the axis add, pointing from N to S. With cos θ = l/√(r² + l²), B = (μ₀/4π)p_m/(r² + l²)^(3/2), and for r ≫ l: B_equatorial = (μ₀/4π)(p_m/r³), opposite to p⃗_m. As for the electric dipole, the axial field is twice the equatorial field at the same distance and points the opposite way.

Worked example 3: field of a short magnet

A short bar magnet has p_m = 2.0 A m². Find the field 0.20 m from its centre (a) on the axis, (b) on the equatorial line. (a) B = (μ₀/4π)(2p_m/r³) = 10⁻⁷ × 4.0/(0.20)³ = (4.0 × 10⁻⁷)/0.008 = 5.0 × 10⁻⁵ T, directed S to N along the magnet. (b) B = 10⁻⁷ × 2.0/0.008 = 2.5 × 10⁻⁵ T, directed N to S, parallel to the magnet.

Torque and potential energy in a uniform field

In a uniform field B⃗, the north pole feels q_mB⃗ and the south pole −q_mB⃗, so the net force is zero but the pair forms a couple. If the magnet makes angle θ with B⃗, the torque is τ = q_mB × 2l sin θ = p_mB sin θ, or τ⃗ = p⃗_m × B⃗, turning the magnet into line with the field. A freely suspended magnet in the laboratory only turns and does not drift, because the Earth's field is uniform over the laboratory; in a non-uniform field a magnet would feel a net force as well.

Turning the magnet slowly from θ′ to θ against this torque needs work W = ∫p_mB sin θ dθ = −p_mB(cos θ − cos θ′), stored as potential energy. Taking θ′ = 90° as the zero, U = −p_mB cos θ = −p⃗_m·B⃗. It is least (−p_mB) when the magnet is along the field and greatest (+p_mB) when it is antiparallel.

Worked example 4: torque and energy

A magnet of moment 2.0 A m² is in a uniform field of 0.050 T. (a) At 30° to the field: τ = p_mB sin θ = 2.0 × 0.050 × 0.5 = 0.050 N m. (b) Energies: aligned, U = −p_mB = −0.10 J; antiparallel, U = +0.10 J. The work to turn it from aligned to antiparallel is 0.10 − (−0.10) = 0.20 J.

B_H = B_E cos I, B_V = B_E sin I, tan I = B_V/B_H. p_m = q_m(2l). Short magnet: B_axial = (μ₀/4π)2p_m/r³, B_equatorial = (μ₀/4π)p_m/r³. τ = p_mB sin θ; U = −p_mB cos θ.

Electric dipole and magnetic dipole

  • Electric dipole
    • p = q(2a), from −q to +q
    • Far field ∝ 1/r³
    • τ⃗ = p⃗ × E⃗, U = −p⃗·E⃗
    • Flux through a closed surface = Q_encl/ε₀
  • Magnetic dipole
    • p_m = q_m(2l), from S to N
    • Far field ∝ 1/r³
    • τ⃗ = p⃗_m × B⃗, U = −p⃗_m·B⃗
    • Flux through any closed surface = 0 (no monopoles)

Key takeaways

  • The Earth's field is described by declination, dip and B_H; at the magnetic equator I = 0°, at the poles I = 90°.
  • Magnetic moment p_m = q_m × 2l, from S to N; there are no isolated poles.
  • Flux Φ = BA cos θ in webers; through a closed surface it is zero.
  • A short magnet's axial field is twice its equatorial field at the same distance.
  • In a uniform field a magnet feels a torque p_mB sin θ but no net force.

Check your understanding

  1. 1. At the magnetic equator, the angle of dip and the vertical component of the Earth's field are:

    1. 90° and maximum
    2. 45° and equal to B_H
    3. 0° and zero
    4. 0° and maximum
    Show answer

    Answer: C. At the magnetic equator the Earth's field is horizontal, so the dip I = 0°, B_V = B_E sin 0° = 0 and B_H = B_E (its largest value).

  2. 2. At a place the angle of dip is 45° and B_H = 0.30 G. The total field B_E is about:

    1. 0.30 G
    2. 0.42 G
    3. 0.21 G
    4. 0.60 G
    Show answer

    Answer: B. B_H = B_E cos I, so B_E = B_H/cos 45° = 0.30/0.707 ≈ 0.42 G. (B_V = B_E sin 45° = 0.30 G, equal to B_H at 45°.)

  3. 3. A bar magnet of moment p_m is cut into two equal pieces perpendicular to its length. The moment of each piece is:

    1. p_m
    2. 2p_m
    3. p_m/4
    4. p_m/2
    Show answer

    Answer: D. Cutting perpendicular to the length keeps the pole strength q_m but halves the magnetic length. So each piece has q_m × l = p_m/2.

  4. 4. The total magnetic flux through a closed surface enclosing a bar magnet is:

    1. zero, because isolated magnetic poles do not exist
    2. μ₀ times the pole strength
    3. equal to p_m
    4. infinite
    Show answer

    Answer: A. Every field line entering the closed surface also leaves it, because field lines are closed loops and there are no monopoles. So ∮B⃗·dA⃗ = 0.

  5. 5. A short magnet has p_m = 1.0 A m². The field at a point on its axis 0.10 m from its centre is:

    1. 1.0 × 10⁻⁴ T
    2. 2.0 × 10⁻⁷ T
    3. 2.0 × 10⁻⁴ T
    4. 1.0 × 10⁻⁶ T
    Show answer

    Answer: C. B_axial = (μ₀/4π)(2p_m/r³) = 10⁻⁷ × 2 × 1.0/(0.10)³ = (2 × 10⁻⁷)/10⁻³ = 2.0 × 10⁻⁴ T. The equatorial value would be half of this.

Privacy · Terms · Refunds · Delivery