- Practice
- About 30 min
- 15 practice questions
Final self-assessment: Dual Nature of Radiation and Matter
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions in one sitting of about 30 minutes, using hc ≈ 1240 eV nm, 1 eV = 1.602 × 10⁻¹⁹ J and λ = 12.27/√V Å where useful. Then read the explanations.
Final self-assessment
-
1. Which form of electron emission is used in a photomultiplier tube to multiply the number of electrons?
- Thermionic emission
- Field emission
- Secondary emission
- Photoelectric emission only
Show answer
Answer: C. In a photomultiplier, fast electrons strike metal surfaces and knock out more electrons: secondary emission. The textbook lists photomultiplier tubes and image intensifiers as examples.
-
2. An electron is accelerated from rest through 50 V. Its kinetic energy is:
- 50 J
- 8.0 × 10⁻¹⁸ J
- 3.2 × 10⁻²¹ J
- 8.0 × 10⁻²⁰ J
Show answer
Answer: B. K = eV = 50 eV = 50 × 1.602 × 10⁻¹⁹ = 8.0 × 10⁻¹⁸ J.
-
3. Why does a negatively charged zinc plate lose its charge under ultraviolet light, while a negatively charged plate under red light does not?
- Red light photons have less energy than the work function of zinc
- Red light is more intense
- Ultraviolet light heats the plate more
- Red light is reflected by zinc
Show answer
Answer: A. Red photons (about 1.8-2 eV) have less energy than zinc's work function, so no electrons are emitted however bright the light; ultraviolet photons have enough.
-
4. In a photoelectric experiment the intensity of the light is halved and the frequency kept the same. The stopping potential:
- is halved
- is doubled
- becomes zero
- stays the same
Show answer
Answer: D. Stopping potential depends on frequency and the metal, not on intensity. Halving intensity halves the current, not V₀.
-
5. Photoelectrons from a surface are stopped by 0.60 V when light of 540 nm is used. The work function of the surface is about:
- 2.30 eV
- 1.70 eV
- 2.90 eV
- 0.60 eV
Show answer
Answer: B. Photon energy = 1240/540 = 2.30 eV. φ₀ = hν − eV₀ = 2.30 − 0.60 = 1.70 eV.
-
6. According to the wave theory, increasing the intensity of light should increase the maximum kinetic energy of photoelectrons. The experiment shows that it:
- increases the kinetic energy as predicted
- decreases the kinetic energy
- does not change the maximum kinetic energy
- stops emission
Show answer
Answer: C. K_max is independent of intensity; this is one of the failures of the wave theory explained by Einstein's photon picture.
-
7. Light of frequency 2ν₀ falls on a metal of threshold frequency ν₀. The maximum kinetic energy of the photoelectrons is:
- hν₀
- 2hν₀
- zero
- hν₀/2
Show answer
Answer: A. K_max = hν − hν₀ = h(2ν₀) − hν₀ = hν₀.
-
8. Two sources, one of 400 nm and one of 600 nm, each emit 1.0 × 10¹⁵ photons per second. The ratio of their powers (400 nm : 600 nm) is:
- 2 : 3
- 1 : 1
- 4 : 9
- 3 : 2
Show answer
Answer: D. Power = nhc/λ. With equal n, P ∝ 1/λ, so P₄₀₀/P₆₀₀ = 600/400 = 3/2.
-
9. On a graph of K_max against ν, the line for a metal cuts the K axis (extended) at −2.3 eV. The work function of the metal is:
- 2.3 eV
- −2.3 eV
- 4.6 eV
- 1.15 eV
Show answer
Answer: A. K_max = hν − φ₀, so the intercept on the K axis is −φ₀. Hence φ₀ = 2.3 eV (potassium has about this value).
-
10. An electron and a photon each have a wavelength of 1.0 nm. Which has the greater momentum?
- The electron
- The photon
- Both have equal momentum
- The photon has no momentum
Show answer
Answer: C. For both, p = h/λ. Equal wavelengths mean equal momenta, 6.6 × 10⁻²⁵ kg m s⁻¹.
-
11. In the Davisson-Germer experiment with 54 V electrons, de Broglie's formula predicts a wavelength of about:
- 0.23 Å
- 1.67 Å
- 12.27 Å
- 6.6 Å
Show answer
Answer: B. λ = 12.27/√54 = 12.27/7.35 = 1.67 Å, close to the 1.65 Å measured from the nickel crystal.
-
12. A proton (mass m_p, charge e) and an alpha particle (mass 4m_p, charge 2e) are accelerated through the same potential difference. The ratio λ_p : λ_α is:
- 1 : 1
- 2√2 : 1
- 2 : 1
- 1 : 2√2
Show answer
Answer: B. λ = h/√(2mqV), so λ ∝ 1/√(mq). For the proton mq = m_p e; for the alpha 4m_p × 2e = 8m_p e. λ_p/λ_α = √(8m_p e/m_p e) = √8 = 2√2. The ratio is 2√2 : 1.
-
13. An X-ray tube gives a shortest wavelength of 0.124 Å. The accelerating voltage is:
- 10 kV
- 100 kV
- 1.0 kV
- 12.4 kV
Show answer
Answer: B. V = 12400/λ₀ = 12400/0.124 = 100000 V = 100 kV.
-
14. If the accelerating voltage of an X-ray tube is increased, which change happens?
- The characteristic lines shift to shorter wavelengths
- The cut-off wavelength increases
- The cut-off wavelength decreases while the characteristic lines stay in place
- Both the cut-off and the lines stay the same
Show answer
Answer: C. λ₀ = 12400/V decreases with V. The characteristic lines depend on the target's energy levels, so they stay at the same wavelengths.
-
15. Which use of X-rays depends on their diffraction by the regular arrangement of atoms?
- Detecting bone fractures
- Studying crystal structures
- Treating tumours
- Checking welded joints
Show answer
Answer: B. Atomic spacings in crystals are comparable to X-ray wavelengths, so crystals diffract X-rays; the pattern reveals the arrangement of atoms. The other uses rely on penetration or on damaging tissue.
Questions 1-3: lesson 1 (electron emission, work function, Hallwachs). Questions 4-6: lesson 2 (photoelectric experiments, stopping potential, wave theory). Questions 7-9: lesson 3 (photons, Einstein's equation). Questions 10-12: lesson 4 (matter waves, Davisson-Germer). Questions 13-15: lesson 5 (X-rays).
Sign in to keep track of the lessons you finish.