• Practice
  • About 25 min
  • 15 practice questions

Final self-assessment: Measurement

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions before you look at any answer. Write your choices on paper, then read every explanation, including those for questions you got right, and note which lessons to revisit.

Final self-assessment

  1. 1. Momentum is mass × velocity. What is its SI unit?

    1. kg m s⁻²
    2. kg m s⁻¹
    3. N m
    4. kg m²
    Show answer

    Answer: B. Mass is in kg and velocity in m s⁻¹, so momentum is in kg × m s⁻¹ = kg m s⁻¹. kg m s⁻² is the newton (force) and N m is the joule (energy).

  2. 2. Which statement about the SI rules is correct?

    1. Write 'Newton' with a capital N when the unit is spelt out
    2. Write the ampere's symbol as 'amp'
    3. Use J K⁻¹ mol⁻¹ rather than J/K/mol
    4. Write 5 kgs for five kilograms
    Show answer

    Answer: C. Only one solidus is allowed in a unit, so J/K/mol is written J K⁻¹ mol⁻¹. Spelt-out units named after people take a small letter (newton), the ampere's symbol is A, and symbols have no plural.

  3. 3. Which pair contains one fundamental and one derived quantity?

    1. Length and mass
    2. Area and volume
    3. Time and electric current
    4. Temperature and density
    Show answer

    Answer: D. Temperature is one of the seven fundamental quantities; density is mass ÷ volume, so it is derived. Length, mass, time and current are all fundamental; area and volume are both derived.

  4. 4. Inian says a light year is 9.46 × 10¹⁵ m; Ezhilan says it is 9.46 × 10¹² km. Who is right?

    1. Only Inian
    2. Only Ezhilan
    3. Neither
    4. Both
    Show answer

    Answer: D. 1 km = 10³ m, so 9.46 × 10¹⁵ m ÷ 10³ = 9.46 × 10¹² km. They have written the same distance in two different units, so both are right.

  5. 5. Which is the correct order from smallest to largest?

    1. angstrom < nanometre < micron < millimetre
    2. nanometre < angstrom < millimetre < micron
    3. micron < nanometre < angstrom < millimetre
    4. millimetre < micron < nanometre < angstrom
    Show answer

    Answer: A. 1 Å = 10⁻¹⁰ m, 1 nm = 10⁻⁹ m, 1 µm = 10⁻⁶ m and 1 mm = 10⁻³ m. Larger negative powers mean smaller lengths, so angstrom < nanometre < micron < millimetre.

  6. 6. The distance to a star is 6.52 light years. About how many parsecs is this? (1 pc = 3.26 ly)

    1. 21.3 pc
    2. 2 pc
    3. 0.5 pc
    4. 3.26 pc
    Show answer

    Answer: B. Parsecs = light years ÷ 3.26 = 6.52 ÷ 3.26 = 2 pc. Multiplying instead gives about 21.3, the wrong way round.

  7. 7. A Vernier caliper (L.C. 0.01 cm) gives MSR = 7 cm and VSC = 6 for a rubber ball, with no zero error. What is the ball's radius?

    1. 7.06 cm
    2. 3.53 cm
    3. 3.5 cm
    4. 14.12 cm
    Show answer

    Answer: B. Diameter = 7 + (6 × 0.01) = 7.06 cm. Radius = 7.06 ÷ 2 = 3.53 cm. 7.06 cm is the diameter, not the radius.

  8. 8. MSR = 8 cm, VSC = 4 and the caliper has a negative zero error of 0.02 cm (L.C. 0.01 cm). What is the correct reading?

    1. 8.02 cm
    2. 8.04 cm
    3. 8.06 cm
    4. 7.98 cm
    Show answer

    Answer: C. Observed reading = 8 + (4 × 0.01) = 8.04 cm. For a negative zero error the correction is positive: 8.04 + 0.02 = 8.06 cm.

  9. 9. Why does a positive zero error in a Vernier caliper need a negative correction?

    1. Because readings are larger than the true value
    2. Because readings are smaller than the true value
    3. Because the least count doubles
    4. Because the main scale is wrong
    Show answer

    Answer: A. With a positive zero error the Vernier zero is already to the right of the main zero when the jaws are closed, so every reading includes that extra amount. Subtracting it (a negative correction) gives the true value.

  10. 10. A screw gauge has a pitch of 0.5 mm and 50 head divisions. With no zero error, PSR = 3 mm and HSC = 20 for a rod. What is its diameter?

    1. 3.20 mm
    2. 3.10 mm
    3. 3.40 mm
    4. 3.02 mm
    Show answer

    Answer: A. L.C. = 0.5 ÷ 50 = 0.01 mm. Diameter = 3 + (20 × 0.01) = 3.20 mm. Using 0.005 or 0.001 for the least count gives the wrong values.

  11. 11. A screw gauge shows its 95th head division on the axis with the spindle touching the anvil. A wire then gives PSR = 0 mm and HSC = 52 (L.C. 0.01 mm). What is the correct diameter?

    1. 0.47 mm
    2. 0.52 mm
    3. 0.57 mm
    4. 1.47 mm
    Show answer

    Answer: C. Zero error = −(100 − 95) × 0.01 = −0.05 mm, so zero correction = +0.05 mm. Observed = 0 + 52 × 0.01 = 0.52 mm. Correct = 0.52 + 0.05 = 0.57 mm.

  12. 12. A stack of 200 sheets of paper measures 17.0 mm in a screw gauge. What is the thickness of one sheet?

    1. 0.17 mm
    2. 0.85 mm
    3. 0.0085 mm
    4. 0.085 mm
    Show answer

    Answer: D. Thickness of one sheet = 17.0 mm ÷ 200 = 0.085 mm. Dividing by 100 by mistake would give 0.17 mm.

  13. 13. An object weighs 98 N on the Earth (g = 9.8 m/s²). What is its mass?

    1. 960.4 kg
    2. 98 kg
    3. 10 kg
    4. 1 kg
    Show answer

    Answer: C. m = w ÷ g = 98 ÷ 9.8 = 10 kg. Multiplying gives 960.4, which would be a weight in newtons for a 98 kg mass, not this answer.

  14. 14. A man of mass 70 kg goes to the Moon, where g ≈ 1.63 m/s². Which is true there?

    1. Mass 70 kg, weight about 114 N
    2. Mass about 11.7 kg, weight 686 N
    3. Mass 70 kg, weight 686 N
    4. Mass about 11.7 kg, weight about 114 N
    Show answer

    Answer: A. Mass never changes: still 70 kg. Weight = 70 × 1.63 = 114.1 N, about 114 N. On the Earth it would be 70 × 9.8 = 686 N.

  15. 15. Which pair of items is matched with a suitable instrument?

    1. Gold ornament: common beam balance
    2. Diameter of a thin wire: metre scale
    3. Vegetables: beam balance; gold ornaments: digital balance
    4. Thickness of a cricket ball: screw gauge
    Show answer

    Answer: C. Vegetables need only gram-level accuracy, so a beam balance suits them; gold needs milligram accuracy, so a digital balance suits it. A thin wire needs a screw gauge, and a cricket ball is too large for a screw gauge and is measured with a Vernier caliper.

Questions 1-3: lesson 1 (quantities, units and SI rules). Questions 4-6: lesson 2 (large and small units). Questions 7-9: lesson 3 (Vernier caliper). Questions 10-12: lesson 4 (screw gauge). Questions 13-15: lesson 5 (mass, weight and balances).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery