• Practice
  • About 16 min
  • 5 practice questions

Atmospheric pressure, the barometer, gauge and absolute pressure

Explain atmospheric pressure and why it falls with altitude, describe the mercury barometer, calculate pressure from a mercury column and relate gauge pressure to absolute pressure.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain what atmospheric pressure is and how it changes with height.
  • Describe how a mercury barometer works.
  • Calculate atmospheric pressure from the height of a mercury column.
  • Convert between atm, bar and pascal.
  • Use absolute pressure = atmospheric pressure ± gauge pressure.

We live at the bottom of an ocean of air. The layer of air around the Earth is the atmosphere. Air takes up space and has weight, so it presses on everything it touches. This pressure is called atmospheric pressure. When people speak of atmospheric pressure they usually mean the value at sea level.

Atmospheric pressure changes with altitude

Above every point on the Earth is a column of air reaching to the top of the atmosphere. On a mountain the column above you is shorter and the air is thinner, so atmospheric pressure decreases with altitude. Below sea level, as in deep mines, the column is taller and the pressure is greater. Our lungs are suited to sea-level pressure, about 101.3 kPa; mountaineers at great heights carry oxygen cylinders because the thin air gives too little oxygen with each breath.

The mercury barometer

A barometer measures atmospheric pressure. The mercury barometer was first made by the Italian physicist Torricelli. A long glass tube, closed at one end, is filled with mercury, its open end is closed, and it is turned upside down into a dish of mercury. The mercury in the tube falls until its column is held up by the air pressing on the mercury in the dish. The space left above the column contains no air: it is a near vacuum and exerts no pressure. So the height of the column is a direct measure of atmospheric pressure. If air pressure rises, more mercury is pushed up the tube; if it falls, the column drops. Mercury is poisonous, so this is a laboratory or weather-station instrument, never a home experiment.

How a mercury barometer balances the air

  1. Air presses on the dish Atmospheric pressure on the open mercury surface
  2. Mercury pushed up the tube Vacuum above the column gives no push down
  3. Column stops rising hρg of the column equals air pressure
  4. Read the height About 760 mm at sea level on a typical day

Worked example 1: one atmosphere

Question: Calculate the pressure of a 760 mm column of mercury (ρ = 13 600 kg/m³, g = 9.8 m/s²). Working: h = 760 mm = 0.76 m. P = hρg = 0.76 × 13 600 × 9.8 = 101 292.8 Pa ≈ 1.013 × 10⁵ Pa. This is called one atmosphere (1 atm).

Units of pressure
UnitValue in pascal
1 atm1.013 × 10⁵ Pa = 101.3 kPa
1 bar1 × 10⁵ Pa
So 1 atm≈ 1.013 bar

At 101.3 kPa, the air pushes with a force of about 101 300 N, that is 101.3 kN, on every square metre of surface. We do not feel crushed because the fluids inside our bodies push outward with a matching pressure.

Worked example 2: a lower reading

Question: A barometer on a hill station reads 700 mm of mercury. Find the atmospheric pressure (ρ = 1.36 × 10⁴ kg/m³, g = 9.8 m/s²). Working: P = 0.700 × 13 600 × 9.8 = 93 296 Pa ≈ 9.33 × 10⁴ Pa, lower than at sea level, as expected at a height.

Worked example 3: height from pressure

Question: How high will the mercury stand when the atmospheric pressure is 98.6 kPa? Working: h = P ÷ (ρg) = 98 600 ÷ (13 600 × 9.8) = 98 600 ÷ 133 280 ≈ 0.740 m, about 740 mm.

Gauge pressure and absolute pressure

A tyre gauge or a blood-pressure instrument shows how much the pressure is above atmospheric pressure. This is gauge pressure, measured from atmospheric pressure as zero. Absolute pressure is measured from a perfect vacuum as zero. For pressures above atmospheric: absolute pressure = atmospheric pressure + gauge pressure. For pressures below atmospheric: absolute pressure = atmospheric pressure − gauge pressure. Tyre pressure at fuel stations is often given in psi, pounds per square inch, an older non-SI unit.

Worked example 4: absolute pressure in a tyre

Question: A tyre gauge reads 200 kPa where atmospheric pressure is 101 kPa. What is the absolute pressure of the air in the tyre? Working: Absolute = 101 + 200 = 301 kPa.

1 atm = 760 mm of mercury = 1.013 × 10⁵ Pa = 1.013 bar. Absolute pressure = atmospheric pressure + gauge pressure (above atmospheric).

Key takeaways: atmospheric pressure comes from the weight of the air above us and falls as we go higher. A mercury barometer balances a mercury column against the air; 760 mm of mercury is one atmosphere. Gauges read pressure above atmospheric; add atmospheric pressure to get the absolute value.

Check your understanding

  1. 1. Why does atmospheric pressure decrease as we climb a mountain?

    1. The air gets warmer
    2. Gravity disappears
    3. The column of air above us is shorter and the air is thinner
    4. Mountains absorb air
    Show answer

    Answer: C. Atmospheric pressure is due to the weight of the air above. Higher up, there is less air above you and it is thinner, so the pressure is lower.

  2. 2. What is in the space above the mercury column in a mercury barometer?

    1. Air at atmospheric pressure
    2. Water vapour at high pressure
    3. Mercury vapour at 1 atm
    4. A near vacuum that exerts no pressure
    Show answer

    Answer: D. When the filled tube is inverted, the mercury falls and leaves an empty space with no air, a near vacuum. It exerts no pressure, so the column's height measures the air pressure alone.

  3. 3. How many pascals is 1 bar?

    1. 1 × 10⁵ Pa
    2. 1.013 × 10⁵ Pa
    3. 760 Pa
    4. 1 × 10³ Pa
    Show answer

    Answer: A. 1 bar is defined as 1 × 10⁵ Pa. 1.013 × 10⁵ Pa is one atmosphere, which is about 1.013 bar.

  4. 4. A barometer reads 750 mm of mercury (ρ = 13 600 kg/m³, g = 10 m/s²). What is the atmospheric pressure?

    1. 102 000 Pa
    2. 1.02 × 10⁴ Pa
    3. 75 000 Pa
    4. 1.36 × 10⁵ Pa
    Show answer

    Answer: A. P = hρg = 0.75 × 13 600 × 10 = 102 000 Pa (with g = 10 m/s²). Forgetting to convert 750 mm to 0.75 m gives a value a thousand times too large.

  5. 5. A gauge on a gas cylinder reads 300 kPa above atmospheric. With atmospheric pressure 100 kPa, the absolute pressure is

    1. 200 kPa
    2. 300 kPa
    3. 400 kPa
    4. 3 kPa
    Show answer

    Answer: C. For pressures above atmospheric, absolute pressure = atmospheric + gauge = 100 + 300 = 400 kPa.

Privacy · Terms · Refunds · Delivery