• Practice
  • About 16 min
  • 5 practice questions

Pascal's law, the hydraulic press, density and relative density

State Pascal's law, calculate the force multiplied by a hydraulic press, find density in kg/m³ and g/cm³ and calculate relative density.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State Pascal's law and describe a simple demonstration.
  • Use F₁/A₁ = F₂/A₂ for a hydraulic press.
  • Calculate density and convert between g/cm³ and kg/m³.
  • Calculate relative density and explain why it has no unit.
  • Describe the density bottle (pycnometer).

Car mechanics lift a whole car with one hand on a lever, and oil mills squeeze oil out of seeds with enormous force. Both use a rule about liquids discovered by Blaise Pascal (1623-1662), a French mathematician and physicist.

Pascal's law

Pascal's law: pressure applied from outside to an incompressible liquid enclosed in a vessel is transmitted equally and undiminished to every part of the liquid and to the walls of the container. To see this, think of a round glass vessel with small holes all over it, filled with water and fitted with a piston. Pushing the piston makes water squirt out of every hole with the same force, in all directions.

The hydraulic press: a force multiplier

A hydraulic press has two connected cylinders filled with liquid, fitted with a small piston of area A₁ and a large piston of area A₂. A force F₁ on the small piston creates pressure P = F₁/A₁. By Pascal's law the same pressure acts on the large piston, which therefore pushes up with F₂ = P × A₂. Equating: F₁/A₁ = F₂/A₂, so F₂ = F₁ × A₂/A₁. Since A₂/A₁ is greater than 1, F₂ is larger than F₁. Hydraulic systems are therefore called force multipliers. They are used in car lifts, hydraulic brakes, presses for baling cotton and for extracting oil from seeds.

How a hydraulic lift multiplies force

  1. Small force F₁ Pushes the small piston (area A₁)
  2. Pressure P = F₁/A₁ Created in the liquid
  3. Pascal's law Same P reaches the large piston
  4. Large force F₂ = P × A₂ Lifts the heavy load

Worked example 1: a garage lift

Question: A garage lift holds a car of mass 1500 kg on a piston of area 0.6 m². The pump piston has an area of 0.02 m². What least force must be applied (g = 9.8 m/s²)? Working: Weight of car F₂ = 1500 × 9.8 = 14 700 N. F₁ = F₂ × A₁/A₂ = 14 700 × 0.02/0.6 = 14 700 ÷ 30 = 490 N. A force of 490 N lifts a car weighing 14 700 N.

Density

Fill one flask to the 200 cm³ mark with water and an identical flask to the same mark with kerosene: the water flask is heavier. Equal volumes of different substances have different masses. Density is the mass per unit volume of a substance: ρ = mass ÷ volume. Its SI unit is kg/m³; g/cm³ is also used. Since 1 g/cm³ = 1000 kg/m³, water's density of 1 g/cm³ is 1000 kg/m³.

Worked example 2: density from a flask

Question: An empty flask has a mass of 90 g. Filled to 200 cm³ with water it is 290 g; filled to 200 cm³ with kerosene it is 250 g. Find both densities. Working: Mass of water = 290 − 90 = 200 g, so density = 200 ÷ 200 = 1 g/cm³. Mass of kerosene = 250 − 90 = 160 g, so density = 160 ÷ 200 = 0.8 g/cm³ = 800 kg/m³.

Relative density

Densities are usually compared with water at 4 °C, where water's density is 1 g/cm³. Relative density (R.D.) = density of the substance ÷ density of water at 4 °C. Because the volumes can be taken equal, R.D. is also mass of a given volume of the substance ÷ mass of an equal volume of water at 4 °C. It is a ratio of two like quantities, so it is a pure number with no unit. When the reference is water, relative density is also called specific gravity.

Relative density is measured with a density bottle (pycnometer). Its ground-glass stopper has a fine hole: when the bottle is filled and the stopper pushed in, the extra liquid escapes through the hole, so the bottle always holds exactly the same volume (at a constant temperature). Weighing it empty, full of water and full of the test liquid gives the masses of equal volumes.

Worked example 3: relative density of mercury

Question: The density of mercury is 13 600 kg/m³. Find its relative density. Working: R.D. = 13 600 ÷ 1000 = 13.6. Mercury is 13.6 times as dense as water.

Worked example 4: using a density bottle

Question (made-up readings): A density bottle weighs 25 g empty, 75 g full of water and 65 g full of an oil. Find the oil's relative density. Working: Mass of water = 75 − 25 = 50 g; mass of oil = 65 − 25 = 40 g. R.D. = 40 ÷ 50 = 0.8.

Pascal's law: F₁/A₁ = F₂/A₂. Density ρ = m/V (kg/m³; 1 g/cm³ = 1000 kg/m³). Relative density = density of substance ÷ density of water at 4 °C (no unit).

Key takeaways: pressure applied to an enclosed liquid spreads equally everywhere, so a small force on a small piston gives a large force on a large piston. Density is mass per unit volume; relative density compares it with water and has no unit.

Check your understanding

  1. 1. Which machine works on Pascal's law?

    1. Mercury barometer
    2. Hydraulic press
    3. Spring balance
    4. Lactometer
    Show answer

    Answer: B. A hydraulic press relies on pressure being transmitted equally through an enclosed liquid, which is Pascal's law. The lactometer works on flotation and the barometer on balancing a liquid column.

  2. 2. In a hydraulic press the small piston has an area of 0.01 m² and the large one 0.5 m². A force of 100 N is applied to the small piston. What force acts on the large piston?

    1. 2 N
    2. 50 N
    3. 5000 N
    4. 500 N
    Show answer

    Answer: C. F₂ = F₁ × A₂/A₁ = 100 × 0.5/0.01 = 100 × 50 = 5000 N.

  3. 3. The density of water is 1 g/cm³. What is it in SI units?

    1. 1000 kg/m³
    2. 1 kg/m³
    3. 100 kg/m³
    4. 0.001 kg/m³
    Show answer

    Answer: A. 1 g = 10⁻³ kg and 1 cm³ = 10⁻⁶ m³, so 1 g/cm³ = 10⁻³ ÷ 10⁻⁶ = 10³ = 1000 kg/m³.

  4. 4. Why does relative density have no unit?

    1. It is always 1
    2. It is measured only in g/cm³
    3. It is a ratio of two densities, so the units cancel
    4. It is a vector
    Show answer

    Answer: C. Relative density divides one density by another, so kg/m³ ÷ kg/m³ leaves a pure number without any unit.

  5. 5. A block of volume 50 cm³ has a mass of 135 g. What is its relative density?

    1. 0.37
    2. 6750
    3. 135
    4. 2.7
    Show answer

    Answer: D. Density = 135 ÷ 50 = 2.7 g/cm³. Dividing by water's 1 g/cm³ gives a relative density of 2.7, with no unit.

Privacy · Terms · Refunds · Delivery