• Practice
  • About 18 min
  • 5 practice questions

Floating, sinking, buoyancy and Archimedes' principle

Predict whether an object floats or sinks from its density, explain buoyant force and Archimedes' principle, state the laws of flotation and describe the hydrometer, lactometer and Cartesian diver.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Predict floating or sinking by comparing densities.
  • Explain where the buoyant force comes from.
  • State and apply Archimedes' principle and find apparent weight.
  • State the two laws of flotation.
  • Describe the hydrometer, lactometer and Cartesian diver.

A wooden log floats on a river while a pebble sinks straight to the bottom. Whether an object floats or sinks depends on how its density compares with that of the liquid, and on the upward push that every fluid gives.

Floating and sinking

If an object's density is less than the liquid's, it floats; if it is greater, it sinks. Wood (less dense than water) floats; stone and iron (denser) sink. A steel ship floats because its hollow shape encloses a lot of air, so its average density is less than that of water.

Worked example 1: float or sink?

Question: A block measures 10 cm × 8 cm × 5 cm and has a mass of 280 g. Will it float in water? Working: Volume = 10 × 8 × 5 = 400 cm³. Density = 280 ÷ 400 = 0.7 g/cm³. This is less than water's 1 g/cm³, so the block floats.

Buoyancy

Pressure in a liquid increases with depth, so the bottom of an immersed object is pushed up harder than its top is pushed down. This difference gives a net upward force called the buoyant force or upthrust, and the effect is called buoyancy. If an object weighs less than the liquid it can displace, the upthrust can match its weight and it floats (positively buoyant); if it weighs more, it sinks (negatively buoyant). Salt water is denser than fresh water, so it gives more upthrust for the same volume displaced; that is why swimming is easier in the sea.

Archimedes' principle

The story goes that Archimedes noticed his body seemed lighter as he sat in his bath and ran out shouting 'Eureka!'. Archimedes' principle: a body wholly or partly immersed in a fluid experiences an upward buoyant force (upthrust) equal to the weight of the fluid it displaces. Because of the upthrust, the body appears to lose some weight. So: upthrust = weight of fluid displaced = apparent loss of weight, and apparent weight = true weight in air − upthrust. The principle applies to gases too: a helium balloon rises because the air it displaces weighs more than the balloon.

Worked example 2: apparent weight

Question: A metal piece weighs 5 N in air. Fully immersed in water it displaces 200 cm³ of water. Find the upthrust and its apparent weight (g = 10 m/s²). Working: Mass of water displaced = 200 g = 0.2 kg; its weight = 0.2 × 10 = 2 N = upthrust. Apparent weight = 5 − 2 = 3 N.

Worked example 3: a floating block

Question: A wooden block of mass 200 g and volume 300 cm³ floats in water. Find the upthrust and its apparent weight. Working: A floating body's weight is balanced by the upthrust, so upthrust = weight of 200 g (about 2 N with g = 10 m/s²). It displaces 200 cm³ of water, so two-thirds of its volume is under water. Apparent weight = true weight − upthrust = 0.

Laws of flotation

  1. The weight of a floating body equals the weight of the fluid it displaces.
  2. The centre of gravity of the floating body and the centre of buoyancy (the point through which the upthrust acts, the centre of the displaced fluid) lie on the same vertical line.

Instruments that use flotation

A hydrometer reads the density or relative density of a liquid directly. It is a glass stem with a weighted bulb at the bottom (lead shots or mercury, so it floats upright) and a narrow marked tube on top. Lowered into a liquid, it sinks until the weight of liquid displaced equals its own weight; the mark at the liquid surface gives the relative density. It sinks deeper in a less dense liquid. Special hydrometers include the lactometer for milk, the saccharometer for sugar solutions and the alcoholometer for alcohol content.

A lactometer checks the purity of milk by its density. Milk is denser than water, so adding water lowers the density and the lactometer sinks deeper, giving a lower reading. Cream is less dense too, so the reading also depends on the cream content. Readings are correct only at the temperature for which the lactometer is marked; some have a built-in thermometer.

A Cartesian diver shows buoyancy at home: a pen cap with a little clay on it, holding a bubble of air, is put in a plastic bottle full of water and the cap is screwed on. Squeezing the bottle pushes a little more water into the pen cap and squeezes its air bubble, so the diver's average density rises and it sinks; releasing the squeeze lets it rise again. A fish moves up and down in a similar way by changing the air in its swim bladder.

Floats or sinks

  • Floats
    • Density less than the liquid
    • Upthrust can equal its weight
    • Positively buoyant
    • Wood, ice, a ship, a helium balloon in air
  • Sinks
    • Density greater than the liquid
    • Upthrust is less than its weight
    • Negatively buoyant
    • Stone, an iron nail, a pebble

Archimedes' principle: upthrust = weight of fluid displaced = apparent loss of weight. A floating body displaces its own weight of fluid.

Key takeaways: less dense than the liquid floats; denser sinks. Upthrust comes from the greater pressure below an object and equals the weight of fluid displaced. Hydrometers and lactometers use flotation to measure density.

Check your understanding

  1. 1. What causes the buoyant force on an object in a liquid?

    1. The liquid pressure is greater at the bottom of the object than at the top
    2. The object's weight
    3. Air above the liquid
    4. Friction with the liquid
    Show answer

    Answer: A. Pressure increases with depth, so the liquid pushes up on the lower surface more than it pushes down on the upper surface. The difference is the upward buoyant force.

  2. 2. A stone weighs 12 N in air and 8 N when fully under water. What is the upthrust on it?

    1. 20 N
    2. 8 N
    3. 1.5 N
    4. 4 N
    Show answer

    Answer: D. Upthrust = apparent loss of weight = 12 − 8 = 4 N. By Archimedes' principle, this also equals the weight of water the stone displaces.

  3. 3. Why is it easier to swim in sea water than in river water?

    1. Sea water is warmer
    2. Sea water is denser, so it gives more upthrust
    3. Sea water has waves
    4. River water has no upthrust
    Show answer

    Answer: B. Dissolved salts make sea water denser. For the same volume displaced, a denser liquid gives a larger upthrust, so the swimmer is supported better.

  4. 4. A hydrometer floats in liquid X with more of its stem showing than in liquid Y. Which is denser?

    1. Y
    2. Both are equal
    3. X
    4. It cannot be told
    Show answer

    Answer: C. A hydrometer always displaces its own weight of liquid. In a denser liquid a smaller volume is enough, so it floats higher. More stem showing in X means X is denser.

  5. 5. Which is one of the laws of flotation?

    1. A floating body weighs more than the fluid it displaces
    2. The centre of gravity and the centre of buoyancy of a floating body lie on the same vertical line
    3. Floating bodies have no weight
    4. A floating body displaces fluid equal to its own volume
    Show answer

    Answer: B. The second law of flotation says the centre of gravity and the centre of buoyancy lie on one vertical line. The first says the weight of a floating body equals the weight of fluid displaced, not its volume.

Sign in to keep track of the lessons you finish.

Next lesson → Final self-assessment: Fluids

Privacy · Terms · Refunds · Delivery