- Practice
- About 15 min
- 5 practice questions
Circuit diagrams, series and parallel circuits
Draw circuits with standard symbols, name the four main parts of a circuit, and compare current and potential difference in series and parallel circuits.
If something looks wrong, please tell us.
By the end of this lesson you can
- Name the four main components of any circuit.
- Recognise common circuit symbols.
- Describe how current behaves in series and parallel circuits.
- Explain why homes are wired in parallel.
- Solve simple problems on series and parallel circuits.
Electricians and engineers do not draw pictures of bulbs and batteries; they draw circuit diagrams with a shared set of symbols, a kind of sign language for circuits. Learning the symbols lets you read any wiring plan.
Parts of a circuit and their symbols
Every circuit has four main parts: (i) a cell or battery (the source), (ii) connecting wires, (iii) a switch (key) to open or close the circuit and (iv) a resistor or load, such as a bulb, that uses the energy. A circuit works only when it is a closed loop.
| Component | How its symbol looks |
|---|---|
| Cell | A long line (+) and a short line (−) side by side |
| Battery | Two or more cell symbols joined in a row |
| Switch (open) | A short line hinged up, leaving a gap in the wire |
| Fixed resistor | A small rectangle (or a zigzag line) in the wire |
| Variable resistor (rheostat) | A resistor with an arrow across it |
| Light bulb | A circle with a cross inside |
| Ammeter | A circle with the letter A |
| Voltmeter | A circle with the letter V |
| Galvanometer | A circle with G or an arrow |
| Fuse | A small rectangle with a line running through it |
| Earth connection | Three horizontal lines getting shorter |
| Wires joined | Crossing lines with a dot where they meet |
Series circuits
In a series circuit the components are joined one after another in a single loop, so there is only one path for the charge. Therefore the current is the same at every point of a series circuit. If one bulb in series fails, the loop breaks and all the bulbs go out. The supply's voltage is shared between the components.
Parallel circuits
In a parallel circuit the components are connected to the source in two or more branches (loops), so the charge has more than one path. The potential difference across each parallel branch is the same, and the main current equals the sum of the branch currents. If one branch fails, the others keep working.
Series versus parallel
-
Series
- One single loop
- Same current everywhere
- Voltage shared between parts
- One break stops everything
- Used in decorative light strings
-
Parallel
- Two or more branches
- Same p.d. across each branch
- Main current = sum of branch currents
- Each branch works on its own
- Used for house wiring
Worked example 1: currents in parallel
Question: A fan, a bulb and a TV are in parallel across the house supply. They draw 0.3 A, 0.2 A and 0.5 A. What is the main current? Working: Main current = 0.3 + 0.2 + 0.5 = 1.0 A. Each appliance has the full supply voltage across it.
Worked example 2: a series circuit
Question: A 9 V battery is connected in series with two resistors of 2 Ω and 4 Ω. An ammeter reads 1.5 A. What does it read if moved to a point between the two resistors? What is the p.d. across each? Working: In series the current is the same everywhere, so it still reads 1.5 A. By V = IR: across 2 Ω, 1.5 × 2 = 3 V; across 4 Ω, 1.5 × 4 = 6 V. Check: 3 + 6 = 9 V, the battery voltage.
Worked example 3: a missing branch current
Question: Two bulbs are in parallel. The main current is 0.9 A and one bulb draws 0.4 A. What does the other draw? Working: 0.9 − 0.4 = 0.5 A.
Why homes use parallel wiring
Household appliances are connected in parallel because (1) each gets the full supply voltage it is designed for, (2) each can be switched on and off on its own and (3) if one fails, the others still work. In series, switching off the TV would switch off every light.
Series: one path, same current, voltages add up to the supply. Parallel: many paths, same voltage, branch currents add up to the main current.
Key takeaways: a circuit needs a source, wires, a switch and a load in a closed loop. Standard symbols describe circuits. Series circuits keep the current the same; parallel circuits keep the voltage the same, which is why homes are wired in parallel.
Check your understanding
-
1. Which is NOT one of the four main components of a basic circuit?
- Cell
- Switch
- Voltmeter
- Connecting wire
Show answer
Answer: C. A basic circuit needs a cell, connecting wires, a switch and a resistor or load. A voltmeter is a measuring instrument added when you want to measure p.d., not a necessary part.
-
2. Three bulbs are joined in series to a battery. What is true of the current?
- It is largest in the first bulb
- It is the same in all three
- It is zero in the last bulb
- It divides equally into three paths
Show answer
Answer: B. A series circuit has only one path, so the same current passes through every bulb.
-
3. Two lamps in parallel draw 0.6 A and 0.4 A. What current comes from the supply?
- 1.0 A
- 0.2 A
- 0.24 A
- 0.5 A
Show answer
Answer: A. In parallel, the main current is the sum of the branch currents: 0.6 + 0.4 = 1.0 A.
-
4. In a parallel circuit, the potential difference across each branch is
- different in each branch
- zero
- shared out in proportion
- the same
Show answer
Answer: D. Each branch is connected directly across the same two points of the supply, so each has the same potential difference.
-
5. Why are household appliances connected in parallel?
- So that all switch off together
- So that each gets the full supply voltage and can work on its own
- To make the current the same in all of them
- To use fewer wires
Show answer
Answer: B. Parallel wiring gives every appliance the full supply voltage and its own branch, so each can be switched independently and keeps working if another fails.
Sign in to keep track of the lessons you finish.