• Practice
  • About 15 min
  • 5 practice questions

Electric field, electric potential and electric current

Describe electric fields and lines of force, explain electric potential, define current as I = q/t in amperes, tell conventional current from electron flow and connect an ammeter correctly.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain what an electric field and electric lines of force are.
  • Describe electric potential in terms of work done.
  • Calculate current with I = q/t and charge with q = It.
  • Tell conventional current from electron current.
  • Connect an ammeter correctly in a circuit.

A charge affects other charges around it without touching them. To describe this we use the ideas of electric field and electric potential. When charges are given a conducting path, they flow, and that flow is an electric current.

Electric field and lines of force

The region around a charge in which another charge feels an electric force is its electric field (E). The field at a point is measured by the force on a unit positive charge placed there, so its unit is newton per coulomb (N/C). A positive charge is pushed along the field; a negative charge is pushed the opposite way.

Fields are drawn with electric lines of force: imaginary straight or curved lines along which a unit positive charge would tend to move, with arrows giving the field's direction. Where the lines are closer together, the field is stronger. For an isolated positive charge the lines point radially outward; for an isolated negative charge they point radially inward. So lines of force start on positive charges and end on negative charges.

Electric potential

Bringing a positive charge close to another positive charge means pushing against repulsion, so work must be done. The electric potential at a point is the work done in bringing a unit positive charge to that point against the electrical forces. Its unit is the joule per coulomb, called the volt (V). Positive charges tend to move from higher potential to lower potential; electrons, being negative, tend to move from lower potential to higher potential.

Electric current

Give a conducting path between two points at different potentials, and electrons flow along it. This flow of charge is an electric current. A cell or battery keeps the potential difference going. Current is the rate at which charge flows past a point: I = q/t. Its SI unit is the ampere (A): 1 A means 1 coulomb of charge passing a cross-section of a wire every second (1 A = 1 C/s).

Direction of current

Before electrons were discovered, scientists thought current was a flow of positive charge, from the positive terminal round the circuit to the negative terminal. This direction is still used and is called conventional current. The actual flow of electrons, from the negative terminal to the positive terminal, is called electron current. The two point opposite ways. In circuit symbols, a cell's positive terminal is the long line and its negative terminal the short line; a battery is two or more cells joined together.

Conventional current and electron flow

  • Conventional current
    • Imagined flow of positive charge
    • From + terminal to − terminal outside the cell
    • From higher to lower potential
    • Used in circuit diagrams
  • Electron current
    • Real flow of electrons in a wire
    • From − terminal to + terminal outside the cell
    • From lower to higher potential
    • Opposite to conventional current

The ammeter

An ammeter measures current. It is connected in series, so that the whole current to be measured passes through it. Current enters at its positive (red) terminal and leaves from its negative (black) terminal.

Worked example 1: finding current

Question: 30 C of charge passes through a wire in 1 minute. What is the current? Working: t = 60 s. I = q/t = 30 ÷ 60 = 0.5 A.

Worked example 2: finding charge

Question: A torch bulb draws 0.3 A for half an hour. How much charge passes through it? Working: t = 30 × 60 = 1800 s. q = It = 0.3 × 1800 = 540 C.

Worked example 3: counting electrons

Question: A current of 1.6 A flows for 10 s. How many electrons pass? Working: q = It = 1.6 × 10 = 16 C. n = q/e = 16 ÷ 1.6 × 10⁻¹⁹ = 10²⁰ electrons.

I = q/t; 1 A = 1 C/s. Conventional current flows from + to − outside the cell; electrons flow from − to +. Ammeter: in series.

Key takeaways: an electric field is the region where a charge feels a force, shown by lines of force from + to −. Potential is work per unit positive charge, in volts. Current is the rate of flow of charge in amperes; conventional current is opposite to electron flow, and an ammeter goes in series.

Check your understanding

  1. 1. Electric lines of force ______ on a positive charge and ______ on a negative charge.

    1. end; start
    2. start; end
    3. start; start
    4. end; end
    Show answer

    Answer: B. Lines of force show the direction a unit positive charge would move: away from a positive charge and towards a negative one. So they start on positive charges and end on negative charges.

  2. 2. What does it mean when electric lines of force are drawn close together?

    1. The field is weak there
    2. There is no charge nearby
    3. The field is strong there
    4. The charge is negative
    Show answer

    Answer: C. The closeness of the lines shows the field's strength: crowded lines mean a strong field, widely spaced lines a weak one.

  3. 3. A charge of 90 C flows through a heater in 30 s. What is the current?

    1. 3 A
    2. 2700 A
    3. 0.33 A
    4. 60 A
    Show answer

    Answer: A. I = q/t = 90 ÷ 30 = 3 A. Multiplying charge by time gives 2700, which is not a current.

  4. 4. How is an ammeter connected in a circuit?

    1. In parallel with the bulb
    2. Across the cell only
    3. Without any terminals
    4. In series, so that all the current passes through it
    Show answer

    Answer: D. An ammeter must carry the very current it measures, so it is placed in series, with current entering at its + terminal and leaving from its − terminal.

  5. 5. In a wire connected to a cell, electrons flow

    1. from the negative terminal to the positive terminal
    2. from the positive terminal to the negative terminal
    3. both ways at once
    4. only inside the cell
    Show answer

    Answer: A. Electrons are negative and move from lower to higher potential, that is from the − terminal through the wire to the + terminal. Conventional current is taken in the opposite direction.

Privacy · Terms · Refunds · Delivery