- Practice
- About 25 min
- 15 practice questions
Final self-assessment: Electric charge and Electric current
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions before you look at any answer. Write your choices on paper, then read every explanation, including those for questions you got right, and note which lessons to revisit.
Final self-assessment
-
1. In current electricity, a positive charge on a body refers to
- presence of extra electrons
- presence of protons only
- absence (shortage) of electrons
- absence of protons
Show answer
Answer: C. A body becomes positive when it has fewer electrons than protons, that is a shortage of electrons. Protons are fixed in nuclei and are not added or removed in charging.
-
2. How many electrons carry a total charge of 8 nC?
- 5 × 10¹⁰
- 1.28 × 10⁻²⁷
- 5 × 10¹⁹
- 8 × 10⁹
Show answer
Answer: A. q = 8 nC = 8 × 10⁻⁹ C. n = q/e = 8 × 10⁻⁹ ÷ 1.6 × 10⁻¹⁹ = 5 × 10¹⁰ electrons.
-
3. Two charged balloons push each other away. What can you conclude?
- One is positive and one negative
- They carry like charges
- One of them is neutral
- They have no charge
Show answer
Answer: B. Repulsion happens only between like charges (both positive or both negative). Unlike charges attract, and a neutral body is not repelled.
-
4. The electric field at a point is measured by
- the work done on a unit positive charge
- the number of electrons there
- the current through that point
- the force on a unit positive charge placed there
Show answer
Answer: D. Electric field is force per unit positive charge (N/C). Work per unit positive charge is the electric potential, a different idea.
-
5. A lamp draws 0.2 A for one hour. How much charge passes through it?
- 12 C
- 720 C
- 0.2 C
- 18 000 C
Show answer
Answer: B. t = 3600 s. q = It = 0.2 × 3600 = 720 C. Using 60 s instead of 3600 s gives the wrong 12 C.
-
6. Which statement about conventional current is correct?
- It is the same as the direction of electron flow
- It flows from the negative to the positive terminal outside the cell
- It flows from the positive to the negative terminal outside the cell
- It does not exist in metals
Show answer
Answer: C. Conventional current is taken as the flow of positive charge, from + to − through the outer circuit. Electrons actually flow the opposite way.
-
7. 2 × 10⁴ C of charge flows through a heater, turning 5 × 10⁶ J of electrical energy into heat. What is the p.d. across it?
- 250 V
- 25 V
- 2500 V
- 100 V
Show answer
Answer: A. V = W/q = 5 × 10⁶ ÷ 2 × 10⁴ = 2.5 × 10² = 250 V.
-
8. The table gives V against I for a resistor: I = 0.5, 1.0, 2.0, 3.0, 4.0 A and V = 1.6, 3.4, 6.7, 10.2, 13.2 V. Its resistance is closest to
- 0.3 Ω
- 13.2 Ω
- 33 Ω
- 3.3 Ω
Show answer
Answer: D. V/I gives about 3.2, 3.4, 3.35, 3.4 and 3.3 Ω. The best straight line through the V-I points has a slope of about 3.3 Ω, which is the resistance.
-
9. What is the difference between e.m.f. and potential difference?
- They have different units
- e.m.f. is the voltage of a source when it sends no current; p.d. is the voltage between two points while current flows
- e.m.f. is measured with an ammeter
- p.d. exists only in cells
Show answer
Answer: B. Both are measured in volts. e.m.f. describes the source's terminal voltage when no current is drawn; potential difference is the voltage across any two points, such as a bulb, when current flows.
-
10. Three identical bulbs are in series with a battery and the ammeter beside the battery reads 0.3 A. What is the current through the third bulb?
- 0.1 A
- 0.9 A
- 0.3 A
- 0 A
Show answer
Answer: C. In a series circuit there is only one path, so the current is the same at every point: 0.3 A through each bulb.
-
11. Two resistors of 3 Ω and 6 Ω are in series across a 9 V battery and a current of 1 A flows. What is the p.d. across the 6 Ω resistor?
- 3 V
- 9 V
- 1.5 V
- 6 V
Show answer
Answer: D. By V = IR, across 6 Ω: 1 × 6 = 6 V. The 3 Ω resistor has 3 V, and 6 + 3 = 9 V, the battery voltage.
-
12. A heater (4 A), an iron (3 A) and a lamp (0.5 A) are all on in a house wired in parallel. What is the main current?
- 7.5 A
- 4 A
- 6 A
- 1.5 A
Show answer
Answer: A. In parallel the main current is the sum of the branch currents: 4 + 3 + 0.5 = 7.5 A.
-
13. Why can ac not be used for electroplating?
- ac has no voltage
- ac reverses direction, so metal deposited in one half-cycle tends to be removed in the next
- ac cannot pass through liquids
- ac is too weak
Show answer
Answer: B. Electroplating needs ions to move steadily to the cathode. With ac the electrodes keep swapping roles, so a steady one-way current (dc) is needed.
-
14. Which group of devices all work mainly on the heating effect of current?
- Electric bell, motor, fan
- Electroplating bath, battery charger, cell
- Iron box, toaster, water heater
- Radio, mobile phone, calculator
Show answer
Answer: C. An iron box, toaster and water heater all turn electrical energy into heat in high-resistance elements, the Joule heating effect.
-
15. A bird sits on one high-voltage overhead wire and is unharmed. Why?
- Birds' bodies are perfect insulators
- Overhead wires carry no current
- The bird's feathers store the charge
- Both feet are on the same wire, so there is almost no potential difference across its body
Show answer
Answer: D. Current flows through a body only if there is a potential difference across it. Both feet touch the same wire at nearly the same potential, so practically no current passes through the bird.
Questions 1-3: lesson 1 (charge and electric force). Questions 4-6: lesson 2 (field, potential and current). Questions 7-9: lesson 3 (e.m.f., p.d., resistance and Ohm's law). Questions 10-12: lesson 4 (series and parallel circuits). Questions 13-15: lesson 5 (effects of current, ac/dc and safety).
Sign in to keep track of the lessons you finish.