• Practice
  • About 15 min
  • 5 practice questions

Measurement, assessment and evaluation: terms and scales of measurement

Separate the three terms examiners love to mix up, and classify any variable as nominal, ordinal, interval or ratio, with the traps that go with each scale.

If something looks wrong, please tell us.

A favourite style of question gives a short situation and asks whether it is measurement, assessment or evaluation, or which scale of measurement a variable uses. The answers are fixed by definitions, so a clear picture of each term and a small table of scales will win these marks quickly.

Three terms, three jobs

Measurement means giving a number to a characteristic by following rules, for example 36 marks out of 50 or a height of 142 cm. It tells you how much, but not whether that is good. Assessment means gathering evidence about learning from many sources, such as tests, observation, projects and conversations, and interpreting it to understand the learner. Evaluation means making a judgement of value or worth against objectives or standards, and then deciding something: promote, re-teach, continue or stop a programme.

A common way to remember the order is that a test provides measurement, measurement is one part of assessment, and assessment feeds evaluation. Measurement is quantitative; assessment and evaluation may also be qualitative. Evaluation always involves a value judgement, which is why 'Is this remedial programme worth continuing?' is evaluation and 'What was the mean score?' is not.

Four scales of measurement

ScaleWhat the numbers doExampleFair summary measure
NominalName or label categories; no orderRoll-number labels, school houses, genderMode
OrdinalGive order, but gaps are not equalRanks, grades A to E, satisfaction levelsMedian
IntervalEqual gaps, but zero is only a conventionTemperature in degrees Celsius, test scores treated as equal stepsMean
RatioEqual gaps and a true zeroHeight, weight, time taken, distanceMean and ratios

The two traps are ordinal and interval. A rank tells you who finished ahead, but not by how much. A Celsius reading has equal steps, yet 0 degrees does not mean 'no heat', so 30 degrees is not 'twice as hot' as 15 degrees. In the same way, a score of zero on a test does not mean zero knowledge, so classroom marks are usually treated as interval data, and we avoid saying that 60 marks show 'twice the ability' of 30.

Worked example 1: classify the variable

Classify: (i) the colour of each student's school house, (ii) positions in a race, (iii) the temperature of a classroom in degrees Celsius, (iv) the time, in seconds, taken to solve a puzzle. Step 1: (i) only names groups, so nominal. Step 2: (ii) gives order but not gaps, so ordinal. Step 3: (iii) has equal steps but no true zero, so interval. Step 4: (iv) has equal steps and a true zero, because zero seconds means no time taken, so ratio. A time of 40 seconds really is twice as long as 20 seconds.

Worked example 2: why ranks hide information

Three runners finish a 2 km race in 10.0, 10.1 and 14.0 minutes, so their ranks are 1, 2 and 3. Step 1: the gap between first and second is 10.1 − 10.0 = 0.1 minute. Step 2: the gap between second and third is 14.0 − 10.1 = 3.9 minutes. Step 3: the ranks make the two gaps look equal, though one is 39 times the other (3.9 ÷ 0.1 = 39). Answer: ranks are ordinal, so we cannot add, subtract or average them as if the gaps were equal.

Worked example 3: which term fits?

(a) A teacher writes '38 out of 50' on a paper. (b) A teacher combines test marks, observation notes and a project to understand how a child is progressing in science. (c) After reading all the evidence, the school decides that its reading-club programme met its aim and should continue. Answer: (a) measurement, because it assigns a number; (b) assessment, because it gathers and interprets varied evidence; (c) evaluation, because it makes a judgement of worth and a decision.

Measurement gives a number; assessment gathers and interprets evidence; evaluation judges worth and decides. Scales rise in power: nominal, ordinal, interval, ratio.

— Rule to remember

Key takeaways

  • Measurement is the number; evaluation is the value judgement and decision.
  • Assessment is wider than measurement and may be qualitative.
  • Nominal names, ordinal orders, interval has equal steps, ratio has a true zero.
  • Ranks and grades are ordinal, so their gaps are not equal.
  • Test marks are usually treated as interval data, since a score of zero does not mean zero knowledge.

Check your understanding

  1. 1. Giving a student 42 out of 60 by following a marking scheme is an example of:

    1. Evaluation
    2. Measurement
    3. Counselling
    4. Sociometry
    Show answer

    Answer: B. Assigning a number by rule is measurement. Evaluation would add a judgement of worth and a decision.

  2. 2. Ranks 1st, 2nd and 3rd in a class are measured on which scale?

    1. Nominal
    2. Interval
    3. Ratio
    4. Ordinal
    Show answer

    Answer: D. Ranks show order only. The gaps between ranks are not known to be equal, so the scale is ordinal.

  3. 3. Which variable is measured on a ratio scale?

    1. Time taken to finish a task
    2. Grade given as A to E
    3. Roll number of a student
    4. Rank in an annual test
    Show answer

    Answer: A. Time has equal units and a true zero, so ratios such as 'twice as long' make sense. Grades and ranks are ordinal and a roll number is only a label.

  4. 4. Deciding, after studying all the evidence, that a teaching method is worth adopting in every class is best called:

    1. Measurement
    2. Nominal scoring
    3. Evaluation
    4. Item analysis
    Show answer

    Answer: C. A judgement of worth followed by a decision is evaluation. Measurement alone only supplies numbers.

  5. 5. Why is it wrong to say that a student with 60 marks knows twice as much as one with 30?

    1. Marks are always nominal numbers
    2. Ranks are always equal to marks
    3. Every test has equal marks for all items
    4. A zero on a test is not a true zero of knowledge
    Show answer

    Answer: D. Without a true zero the scale is interval, so ratio statements are not valid. Marks do show order and equal steps, but not 'twice as much'.

Privacy · Terms · Refunds · Delivery