- Foundation
- About 25 min
- 15 practice questions
Final self-assessment: Electricity
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions in one sitting of about 25 minutes, writing the formula and the units for each calculation. The questions mix ideas from all five lessons and are a little harder than the lesson checks. Check your answers only after finishing, and read every explanation.
Final self-assessment
-
1. A current of 1.6 A flows in a wire for 10 s. How many electrons pass a point in the wire? (charge on an electron = 1.6 × 10⁻¹⁹ C)
- 10¹⁹
- 10²⁰
- 1.6 × 10²⁰
- 2.56 × 10⁻¹⁸
Show answer
Answer: B. Q = I × t = 1.6 × 10 = 16 C. n = Q ÷ e = 16 ÷ (1.6 × 10⁻¹⁹) = 10 × 10¹⁹ = 10²⁰ electrons.
-
2. How much work is done in moving 50 C of charge across a potential difference of 220 V?
- 4.4 J
- 270 J
- 11,000 J
- 1,100 J
Show answer
Answer: C. W = V × Q = 220 × 50 = 11,000 J (11 kJ).
-
3. Assertion (A): An ammeter is connected in series with a component.
Reason (R): The current is the same at every point of a series path, so the ammeter reads the current through the component.- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. Placing the ammeter in the same single path makes the component's whole current pass through it, so R correctly explains A.
-
4. A wire carries 0.25 A when the potential difference across it is 2.0 V. At the same temperature, what current flows when the potential difference is 5.0 V?
- 0.10 A
- 1.25 A
- 0.4 A
- 0.625 A
Show answer
Answer: D. R = V ÷ I = 2.0 ÷ 0.25 = 8 Ω. At 5.0 V, I = 5.0 ÷ 8 = 0.625 A.
-
5. A wire of resistance R is cut into four equal pieces, and the four pieces are joined in parallel. The equivalent resistance is
- R/16
- R/4
- 4R
- R
Show answer
Answer: A. Each piece has resistance R/4. Four equal resistances of R/4 in parallel give (R/4) ÷ 4 = R/16.
-
6. A uniform wire is stretched to three times its original length without changing its volume. Its resistance becomes
- 3 times
- 1/3 of the original
- 9 times
- 6 times
Show answer
Answer: C. Length becomes 3l and area becomes A/3 (volume unchanged). R′ = ρ(3l) ÷ (A/3) = 9ρl/A = 9R.
-
7. A metal wire of resistivity 1.7 × 10⁻⁸ Ω m is 100 m long with a cross-sectional area of 1 mm². Its resistance is
- 1.7 Ω
- 0.17 Ω
- 17 Ω
- 1.7 × 10⁻⁶ Ω
Show answer
Answer: A. A = 1 mm² = 1 × 10⁻⁶ m². R = ρl ÷ A = (1.7 × 10⁻⁸ × 100) ÷ 10⁻⁶ = 1.7 × 10⁻⁶ ÷ 10⁻⁶ = 1.7 Ω.
-
8. You have three 6 Ω resistors. How can you join all three to get 9 Ω?
- All three in series
- All three in parallel
- Two in series, and that pair in parallel with the third
- Two in parallel, and that pair in series with the third
Show answer
Answer: D. Two 6 Ω in parallel give 3 Ω; adding the third in series gives 3 + 6 = 9 Ω. (All in series = 18 Ω; all in parallel = 2 Ω; 12 Ω in parallel with 6 Ω = 4 Ω.)
-
9. Resistors of 2 Ω and 4 Ω are connected in parallel across a 6 V battery. The total current drawn from the battery is
- 1 A
- 4.5 A
- 3 A
- 1.5 A
Show answer
Answer: B. Each gets 6 V. I₁ = 6 ÷ 2 = 3 A and I₂ = 6 ÷ 4 = 1.5 A. Total I = 3 + 1.5 = 4.5 A. (Check: Rp = 8/6 = 4/3 Ω, and 6 ÷ 4/3 = 4.5 A.)
-
10. A string of decorative bulbs is connected in series. One bulb's filament breaks. What happens?
- Only that bulb goes off
- The other bulbs glow more brightly
- All the bulbs go off
- The fuse in the house melts
Show answer
Answer: C. In series there is only one path. A broken filament opens the circuit, so current stops in every bulb.
-
11. A current of 0.5 A flows through a 40 Ω resistor for 5 minutes. The heat produced is
- 3000 J
- 100 J
- 6000 J
- 50 J
Show answer
Answer: A. t = 5 × 60 = 300 s. H = I²Rt = 0.5² × 40 × 300 = 0.25 × 40 × 300 = 3000 J.
-
12. A bulb is rated 100 W, 220 V. Its resistance when working normally is
- 2.2 Ω
- 484 Ω
- 22,000 Ω
- 0.45 Ω
Show answer
Answer: B. R = V² ÷ P = 220² ÷ 100 = 48400 ÷ 100 = 484 Ω.
-
13. Five 40 W bulbs are used for 6 hours a day for 30 days. At an illustrative rate of ₹5 per unit, the cost is
- ₹36
- ₹1,800
- ₹900
- ₹180
Show answer
Answer: D. Energy = 5 × 40 W × 6 h × 30 = 36,000 W h = 36 kW h. Cost = 36 × ₹5 = ₹180.
-
14. A 2 kW geyser runs on a 220 V supply. Which fuse rating is the most suitable for its circuit?
- 1 A
- 5 A
- 10 A
- 100 A
Show answer
Answer: C. I = P ÷ V = 2000 ÷ 220 ≈ 9.1 A. The fuse must be a little above the normal current, so 10 A suits; 1 A or 5 A would blow at once, and 100 A would give no protection.
-
15. Why is tungsten used for the filament of an incandescent bulb?
- It has a very high melting point
- It has zero resistance
- It does not get hot
- It is a good insulator
Show answer
Answer: A. The filament must become hot enough to glow without melting. Tungsten's very high melting point allows this; the bulb is also filled with inactive gas to make the filament last longer.
Questions 1-3: lessons 1 and 2 (current, charge and potential difference). Questions 4-7: lesson 3 (Ohm's law and resistivity). Questions 8-10: lesson 4 (series and parallel). Questions 11-15: lesson 5 (heating effect, power and energy).
Sign in to keep track of the lessons you finish.