- Foundation
- About 18 min
- 5 practice questions
Resistors in series and in parallel
Find the equivalent resistance of resistors joined in series, in parallel and in simple combinations, work out the current and voltage in each part, and explain why homes use parallel wiring.
If something looks wrong, please tell us.
By the end of this lesson you can
- Use Rs = R₁ + R₂ + R₃ for resistors in series and share the voltage among them.
- Use 1/Rp = 1/R₁ + 1/R₂ + 1/R₃ for resistors in parallel and share the current among them.
- Solve simple series-parallel combinations and explain the advantages of parallel connection.
Real circuits rarely have just one resistor. Fairy lights, a car's lamps and the wiring of a house all connect several devices together. There are two basic ways to join them: one after another (series) or side by side (parallel). The total effect of a group is called its equivalent resistance.
Resistors in series
In series, resistors are joined end to end so there is only one path. The same current flows through each one, and the potential difference of the source is shared among them: V = V₁ + V₂ + V₃. Since V₁ = IR₁ and so on, IRs = IR₁ + IR₂ + IR₃.
Series: Rs = R₁ + R₂ + R₃. Same current through each; voltages add up to the supply voltage.
Worked example 1: series circuit
Resistors of 2 Ω, 3 Ω and 5 Ω are joined in series to a 12 V battery. Find the current and the potential difference across each. Working: Rs = 2 + 3 + 5 = 10 Ω. I = V ÷ Rs = 12 ÷ 10 = 1.2 A. V₁ = 1.2 × 2 = 2.4 V; V₂ = 1.2 × 3 = 3.6 V; V₃ = 1.2 × 5 = 6.0 V. Check: 2.4 + 3.6 + 6.0 = 12 V, the supply voltage.
Resistors in parallel
In parallel, each resistor is connected directly across the same two points. Each gets the same potential difference, and the total current divides among the branches: I = I₁ + I₂ + I₃. Since I₁ = V/R₁ and so on, V/Rp = V/R₁ + V/R₂ + V/R₃.
Parallel: 1/Rp = 1/R₁ + 1/R₂ + 1/R₃. Same voltage across each; currents add up to the total current. Rp is less than the smallest resistance.
Worked example 2: parallel circuit
Resistors of 6 Ω and 3 Ω are connected in parallel to a 6 V battery. Working: 1/Rp = 1/6 + 1/3 = 1/6 + 2/6 = 3/6 = 1/2, so Rp = 2 Ω. Total current I = 6 ÷ 2 = 3 A. Branch currents: I₁ = 6 ÷ 6 = 1 A and I₂ = 6 ÷ 3 = 2 A. Check: 1 + 2 = 3 A. The smaller resistance carries the larger current.
Worked example 3: a combination
A 4 Ω resistor is in series with a parallel pair of 6 Ω and 3 Ω, all connected to 12 V. Working: the pair is equivalent to 2 Ω (from example 2). Total R = 4 + 2 = 6 Ω. Current from the battery I = 12 ÷ 6 = 2 A. Potential difference across the 4 Ω = 2 × 4 = 8 V, so across the pair = 12 − 8 = 4 V. Branch currents: 4 ÷ 6 ≈ 0.67 A and 4 ÷ 3 ≈ 1.33 A, which add to 2 A.
Series and parallel connections
-
Series
- One path for the current
- Same current in every resistor
- Voltage is shared
- Rs is larger than the largest resistor
- If one device fails, the circuit breaks and all stop
-
Parallel
- Separate path through each resistor
- Same voltage across every resistor
- Current is shared
- Rp is smaller than the smallest resistor
- Each device works and can be switched independently
Why homes use parallel wiring
A series arrangement is unsuitable for household appliances. All devices would carry the same current even though they need very different currents; the supply voltage would be divided, so none would get the full voltage; and if one bulb failed, everything would go off. In parallel, every appliance gets the full supply voltage, draws the current it needs, and can be switched on or off without affecting the others. The total resistance is also lower.
Key takeaways: in series, Rs = R₁ + R₂ + R₃, the current is the same everywhere and the voltages add up. In parallel, 1/Rp = 1/R₁ + 1/R₂ + 1/R₃, the voltage is the same across each branch and the currents add up, and Rp is smaller than any single resistance. For combinations, simplify the parallel group first. Homes are wired in parallel.
Check your understanding
-
1. Three resistors of 6 Ω each are connected in parallel. Their equivalent resistance is
- 18 Ω
- 6 Ω
- 3 Ω
- 2 Ω
Show answer
Answer: D. 1/Rp = 1/6 + 1/6 + 1/6 = 3/6 = 1/2, so Rp = 2 Ω.
-
2. Resistors of 4 Ω and 12 Ω are joined in series to an 8 V battery. The current in the circuit is
- 0.5 A
- 2 A
- 0.67 A
- 2.67 A
Show answer
Answer: A. Rs = 4 + 12 = 16 Ω. I = V ÷ Rs = 8 ÷ 16 = 0.5 A, the same through both resistors.
-
3. Resistors of 4 Ω and 12 Ω are connected in parallel. The equivalent resistance is
- 16 Ω
- 3 Ω
- 8 Ω
- 0.33 Ω
Show answer
Answer: B. 1/Rp = 1/4 + 1/12 = 3/12 + 1/12 = 4/12 = 1/3, so Rp = 3 Ω, less than the smaller resistor.
-
4. Which is NOT an advantage of connecting household appliances in parallel?
- Each appliance gets the full supply voltage
- Each appliance can be switched on or off independently
- The same current flows through every appliance
- One appliance failing does not stop the others
Show answer
Answer: C. In parallel the voltage is the same across each appliance, but each one draws its own current. The same current through every device is a feature of series connection, and would be a disadvantage at home.
-
5. Assertion (A): The equivalent resistance of resistors in parallel is less than the smallest individual resistance.
Reason (R): In parallel, each extra resistor provides an additional path for the current.- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. Every extra branch gives the current another path, so the combination lets more current flow for the same voltage, meaning a lower total resistance; R explains A.
Sign in to keep track of the lessons you finish.