- Foundation
- About 25 min
- 15 practice questions
Final self-assessment: Thermodynamics
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions in one sitting of about 25 minutes, with a rough sheet for the numericals and without looking back at the lessons. Use R = 8.31 J mol⁻¹ K⁻¹ and convert temperatures to kelvin where needed. Check your answers only after you finish, and read every explanation, including those for questions you got right.
Final self-assessment
-
1. Body A is in thermal equilibrium with body C, and body B is also in thermal equilibrium with C. What can be concluded?
- A and B have the same internal energy
- A and B are at the same temperature
- A and B have the same mass
- Nothing, unless A and B touch
Show answer
Answer: B. By the zeroth law, A and B are in thermal equilibrium with each other, so they have the same temperature. Their internal energies and masses can be quite different.
-
2. A 10 g lead bullet travelling at 300 m s⁻¹ stops in a target; half its kinetic energy heats the bullet. With s(lead) = 130 J kg⁻¹ K⁻¹, its temperature rises by about
- 35 K
- 17 K
- 346 K
- 173 K
Show answer
Answer: D. KE = ½ × 0.010 × 300² = 450 J. Half, 225 J, heats the bullet. ΔT = 225/(0.010 × 130) = 225/1.3 ≈ 173 K.
-
3. A gas goes from state A to state B by two different paths. Which statement is true?
- The heat absorbed is the same for both paths
- The work done is the same for both paths
- The change in internal energy is the same for both paths
- Heat and work are both state variables
Show answer
Answer: C. Internal energy is a state variable, so ΔU depends only on A and B. Heat and work depend on the path; only their difference Q − W is path-independent.
-
4. Along path 1 from state A to state B a gas absorbs 600 J of heat and does 250 J of work. Along path 2 between the same states it does 100 J of work. How much heat does it absorb along path 2?
- 350 J
- 450 J
- 750 J
- 250 J
Show answer
Answer: B. ΔU = Q − W = 600 − 250 = 350 J for any path. For path 2, Q = ΔU + W = 350 + 100 = 450 J.
-
5. 2.0 mol of a diatomic ideal gas (Cv = 5R/2) is heated at constant pressure through 20 K. How much heat is needed?
- 831 J
- 1.66 × 10³ J
- 332 J
- 1.16 × 10³ J
Show answer
Answer: D. Cp = Cv + R = 7R/2 = 3.5 × 8.31 ≈ 29.1 J mol⁻¹ K⁻¹. Q = μCpΔT = 2.0 × 29.1 × 20 ≈ 1.16 × 10³ J. Using Cv instead would give only 831 J.
-
6. A heater supplies heat to a system at 150 W while the system does work at 90 J per second. At what rate does its internal energy increase?
- 240 W
- 60 W
- 1.67 W
- 90 W
Show answer
Answer: B. Per second, ΔU = ΔQ − ΔW = 150 − 90 = 60 J, so the internal energy rises at 60 W.
-
7. 1.0 mol of a monatomic ideal gas (γ = 5/3) expands adiabatically and its temperature falls from 500 K to 400 K. How much work does it do?
- 1.25 × 10³ J
- 831 J
- 2.08 × 10³ J
- 554 J
Show answer
Answer: A. W = μR(T₁ − T₂)/(γ − 1) = 1.0 × 8.31 × 100/(2/3) = 831 × 1.5 ≈ 1.25 × 10³ J, taken entirely from the gas's internal energy.
-
8. A gas is taken round a rectangular cycle on a P-V diagram between pressures 1.0 × 10⁵ Pa and 3.0 × 10⁵ Pa and volumes 1.0 L and 3.0 L. What is the net work done per cycle (in magnitude)?
- 200 J
- 600 J
- 400 J
- 900 J
Show answer
Answer: C. Net work in a cycle = area enclosed = ΔP × ΔV = (2.0 × 10⁵ Pa) × (2.0 × 10⁻³ m³) = 400 J. Since ΔU = 0 over the cycle, the net heat absorbed is also 400 J.
-
9. An ideal gas in an insulated container expands freely into an evacuated chamber. Which is correct?
- Q = 0, W = 0 and ΔU = 0, so its temperature does not change
- Its temperature falls because it does work
- Heat is absorbed from the walls
- Its internal energy increases
Show answer
Answer: A. The container is insulated, so Q = 0; the gas pushes against nothing, so W = 0. The first law gives ΔU = 0, and for an ideal gas this means no change of temperature. The process is irreversible.
-
10. A refrigerator with a coefficient of performance of 5 removes 1000 J of heat from its cold compartment. How much heat does it release to the room?
- 200 J
- 1000 J
- 800 J
- 1200 J
Show answer
Answer: D. α = Q₂/W, so W = 1000/5 = 200 J. Heat to the room Q₁ = Q₂ + W = 1000 + 200 = 1200 J.
-
11. Assertion (A): Spontaneous processes in nature, such as heat flowing out of a hot pan, are irreversible. Reason (R): Real processes pass through non-equilibrium states and involve dissipative effects such as friction.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. A reversible process must be quasi-static and free of dissipation. Natural processes involve finite temperature differences, non-equilibrium states and friction, which is exactly why they cannot be reversed without leaving changes elsewhere. R explains A.
-
12. An engine does 400 J of work in each cycle and rejects 600 J of heat to its sink. Its efficiency is
- 67%
- 40%
- 60%
- 150%
Show answer
Answer: B. Q₁ = W + Q₂ = 400 + 600 = 1000 J. η = W/Q₁ = 400/1000 = 0.40, that is 40%. Dividing 400 by 600 is a common mistake.
-
13. A Carnot engine has an efficiency of 40% and its sink is at 27 °C. What is the temperature of its source?
- 45 °C
- 500 °C
- 227 °C
- 177 °C
Show answer
Answer: C. T₂ = 300 K. η = 1 − T₂/T₁ gives 0.40 = 1 − 300/T₁, so T₁ = 300/0.60 = 500 K = 227 °C.
-
14. The sink of a Carnot engine is kept at 300 K. To raise its efficiency from 40% to 50%, the source temperature must be raised from 500 K by
- 50 K
- 200 K
- 150 K
- 100 K
Show answer
Answer: D. For 50%: 0.50 = 1 − 300/T₁′, so T₁′ = 600 K. The source must go from 500 K to 600 K, an increase of 100 K.
-
15. An inventor claims an engine working between 500 K and 400 K with an efficiency of 30%. The claim is
- possible, since 30% is less than 100%
- possible only with a gas as working substance
- impossible, because the Carnot limit between these temperatures is only 20%
- impossible, because every engine has zero efficiency
Show answer
Answer: C. The greatest possible efficiency is that of a Carnot engine: 1 − 400/500 = 0.20, or 20%. By Carnot's theorem no engine between these temperatures can reach 30%.
Questions 1-3: lesson 1 (zeroth law, internal energy, heat and work). Questions 4-6: lesson 2 (first law and specific heats). Questions 7-9: lesson 3 (thermodynamic processes). Questions 10-12: lesson 4 (second law, engines, refrigerators and reversibility). Questions 13-15: lesson 5 (Carnot engine).
Sign in to keep track of the lessons you finish.