• Foundation
  • About 18 min
  • 5 practice questions

Atmospheric pressure, gauges and hydraulic machines

Measure atmospheric and gauge pressure with a barometer and a manometer, convert between pascal, atm, bar and torr, and use Pascal's law to solve hydraulic lift and brake problems.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain how a mercury barometer measures atmospheric pressure.
  • Use an open-tube manometer reading to find gauge pressure.
  • Convert pressures between Pa, atm, bar and torr (mm of Hg).
  • Apply Pascal's law of transmission to hydraulic lifts and brakes.

We live at the bottom of an ocean of air. The weight of the air above pushes on everything around us, yet we hardly notice it because the same pressure acts from all sides. Measuring this pressure, and the extra pressure in tyres, pipes and blood vessels, needs simple liquid columns. And the fact that a pressure applied to a liquid spreads through all of it lets a small push lift a car.

Atmospheric pressure and the barometer

The atmospheric pressure at a point equals the weight of a column of air of unit cross-section reaching from that point to the top of the atmosphere. At sea level it is about 1.013 × 10⁵ Pa = 1 atm. Torricelli measured it with a mercury barometer: a long glass tube, closed at one end, is filled with mercury and inverted into a dish of mercury. The mercury falls until its column is about 76 cm high. The space above it holds only mercury vapour, whose pressure is negligible, so the pressure at the top of the column is about zero. A point inside the tube at the level of the dish surface has the same pressure as the open surface outside, Pa. So Pa = ρgh, where ρ is the density of mercury and h the height of the column.

Worked example 1: height of the mercury column

Taking Pa = 1.013 × 10⁵ Pa, ρ(mercury) = 13.6 × 10³ kg m⁻³ and g = 9.8 m s⁻², find h. h = Pa/(ρg) = 1.013 × 10⁵/(13.6 × 10³ × 9.8) = 1.013 × 10⁵/(1.333 × 10⁵) = 0.760 m = 76.0 cm. A water barometer would need a column 13.6 times taller, over 10 m, which is why mercury is used.

Units of pressure

Common pressure units
UnitValue in pascalWhere used
1 atm1.013 × 10⁵ PaPressure of the atmosphere at sea level
1 bar10⁵ PaMeteorology (also the millibar)
1 torr = 1 mm of Hgabout 133 PaMedicine and physiology, e.g. blood pressure

Gauge pressure and the open-tube manometer

An open-tube manometer is a U-tube holding a liquid: a light liquid such as oil for small pressure differences, mercury for large ones. One arm is open to the air and the other is connected to the gas whose pressure is wanted. Points at the same level in the same connected liquid are at the same pressure, so the gas pressure P equals Pa plus the pressure of the extra liquid column of height h in the open arm. The manometer therefore reads the gauge pressure P − Pa = ρgh. Tyre gauges and blood-pressure instruments (sphygmomanometers) also read gauge pressure.

Worked example 2: reading a manometer

A mercury manometer connected to a gas cylinder shows the mercury 15 cm higher in the open arm. Gauge pressure = ρgh = 13.6 × 10³ × 9.8 × 0.15 = 2.0 × 10⁴ Pa (19 992 Pa). With Pa = 1.013 × 10⁵ Pa, the absolute pressure of the gas is about 1.21 × 10⁵ Pa.

Pascal's law of transmission and hydraulic machines

Push a piston into a closed vessel of liquid fitted with several vertical tubes, and the liquid rises equally in all of them. This is the second form of Pascal's law: a pressure applied to any part of an enclosed fluid is transmitted undiminished and equally in all directions to every part of the fluid and the walls of its container.

In a hydraulic lift a small piston of area A₁ pushes on the liquid with force F₁, creating a pressure P = F₁/A₁. The same pressure acts on a large piston of area A₂, giving an upward force F₂ = PA₂ = F₁(A₂/A₁). The force is multiplied by A₂/A₁, the mechanical advantage. Energy is not created: the liquid is incompressible, so the volume pushed in equals the volume pushed out, A₁d₁ = A₂d₂, and the large piston moves a much smaller distance. Hydraulic brakes work the same way: a small force on the pedal moves the master piston, the pressure is carried by brake oil to larger pistons at the wheels, and because the pressure reaches all of them equally the braking effort is equal on all four wheels.

How a hydraulic lift multiplies force

  1. Small force F₁ on small piston A₁ Creates pressure P = F₁/A₁ in the liquid.
  2. Pressure transmitted undiminished Pascal's law: the same P everywhere in the liquid.
  3. Large piston A₂ pushed up F₂ = P × A₂ = F₁ × A₂/A₁.
  4. Distances trade off A₁d₁ = A₂d₂: the large piston moves less.

Worked example 3: lifting a car

A car of mass 1200 kg rests on the large piston (radius 20 cm) of a hydraulic lift whose small piston has radius 2.0 cm. Take g = 9.8 m s⁻². (a) Force needed on the small piston: F₂ = 1200 × 9.8 = 11 760 N. A₁/A₂ = (r₁/r₂)² = (2.0/20)² = 1/100. F₁ = 11 760/100 = 117.6 N, about 118 N. (b) Pressure in the liquid: P = F₂/A₂ = 11 760/(π × 0.20²) = 11 760/0.1257 ≈ 9.4 × 10⁴ Pa (gauge). (c) If the small piston is pushed in 50 cm, the car rises 50 × (1/100) = 0.50 cm. Many strokes, refilled from a reservoir, raise it further.

Key takeaways

  • Barometer: Pa = ρgh; about 76 cm of mercury at sea level.
  • 1 atm = 1.013 × 10⁵ Pa, 1 bar = 10⁵ Pa, 1 torr = 1 mm of Hg ≈ 133 Pa.
  • Manometers, tyre gauges and blood-pressure gauges read gauge pressure, P − Pa.
  • Hydraulic lift: F₂ = F₁(A₂/A₁) and A₁d₁ = A₂d₂.

Check your understanding

  1. 1. A blood pressure reading is 120 mm of Hg (gauge). Using 1 mm of Hg ≈ 133 Pa, this is about

    1. 1.6 × 10⁴ Pa
    2. 1.2 × 10⁵ Pa
    3. 9.0 × 10² Pa
    4. 1.6 × 10⁶ Pa
    Show answer

    Answer: A. 120 × 133 Pa = 15 960 Pa ≈ 1.6 × 10⁴ Pa. Mistaking mm of Hg for kPa or multiplying by 1000 gives the wrong orders of magnitude.

  2. 2. If a barometer used water (ρ = 1000 kg m⁻³) instead of mercury, about how tall would the column be at a pressure of 1.013 × 10⁵ Pa? (g = 9.8 m s⁻²)

    1. 0.76 m
    2. 1.03 m
    3. 10.3 m
    4. 103 m
    Show answer

    Answer: C. h = Pa/(ρg) = 1.013 × 10⁵/(1000 × 9.8) = 10.3 m. This is 13.6 times the 0.76 m mercury column, because mercury is 13.6 times denser than water.

  3. 3. In a hydraulic press the large piston has 50 times the area of the small one. A force of 200 N is applied to the small piston. What force acts on the large piston?

    1. 4 N
    2. 250 N
    3. 10 000 N
    4. 2000 N
    Show answer

    Answer: C. The pressure is transmitted undiminished: F₂ = F₁ × A₂/A₁ = 200 × 50 = 10 000 N. The large piston, however, moves only 1/50 of the distance the small one moves.

  4. 4. A tyre gauge reads 2.0 × 10⁵ Pa. What does this reading mean?

    1. The absolute pressure in the tyre is 2.0 × 10⁵ Pa
    2. The pressure in the tyre exceeds atmospheric pressure by 2.0 × 10⁵ Pa
    3. The pressure in the tyre is 2.0 × 10⁵ Pa less than atmospheric
    4. The tyre holds air at 2 atm absolute
    Show answer

    Answer: B. Tyre gauges measure gauge pressure, P − Pa. The absolute pressure is therefore about 2.0 × 10⁵ + 1.0 × 10⁵ ≈ 3.0 × 10⁵ Pa.

  5. 5. Why do hydraulic brakes give equal braking effort on all four wheels of a car?

    1. Each wheel has its own pedal
    2. The brake oil is compressed more at the front wheels
    3. The pressure created at the master cylinder is transmitted equally through the oil to all the wheel cylinders
    4. Friction is the same on all roads
    Show answer

    Answer: C. By Pascal's law the pressure applied to the enclosed brake oil reaches every part of it undiminished, so every wheel cylinder receives the same pressure and, with equal piston areas, the same force.

Privacy · Terms · Refunds · Delivery