• Foundation
  • About 25 min
  • 15 practice questions

Final self-assessment: Mechanical Properties of Fluids

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions in one sitting of about 25 minutes, with a rough sheet for the numericals and without looking back at the lessons. Use g = 9.8 m s⁻², ρ(water) = 1000 kg m⁻³ and Pa = 1.01 × 10⁵ Pa unless a question says otherwise. Check your answers only after you finish, and read every explanation, including those for questions you got right.

Final self-assessment

  1. 1. What is the absolute pressure on a swimmer 15 m below the surface of a freshwater lake?

    1. 1.47 × 10⁵ Pa
    2. 2.48 × 10⁵ Pa
    3. 1.16 × 10⁵ Pa
    4. 3.49 × 10⁵ Pa
    Show answer

    Answer: B. P = Pa + ρgh = 1.01 × 10⁵ + 1000 × 9.8 × 15 = 1.01 × 10⁵ + 1.47 × 10⁵ = 2.48 × 10⁵ Pa. The value 1.47 × 10⁵ Pa is only the gauge pressure.

  2. 2. A U-tube holds mercury (relative density 13.6). Water is poured into one arm until the water column is 27.2 cm tall above the mercury it rests on. How much higher does the mercury stand in the other arm than the water-mercury surface?

    1. 27.2 cm
    2. 13.6 cm
    3. 1.0 cm
    4. 2.0 cm
    Show answer

    Answer: D. Points at the same level in the mercury are at the same pressure, so 27.2 cm of water balances h of mercury: 1000 × g × 27.2 = 13 600 × g × h, giving h = 27.2/13.6 = 2.0 cm.

  3. 3. Assertion (A): The pressure at the bottom of a vessel of water depends on the shape of the vessel. Reason (R): The pressure at depth h in a liquid open to the air is P = Pa + ρgh.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: D. R is true, and it shows that the pressure depends only on the depth, the density and Pa. The shape and the amount of water do not appear, so A is false (the hydrostatic paradox).

  4. 4. In a hydraulic lift the small piston has diameter 2.0 cm and the large piston 10 cm. A force of 150 N on the small piston can support what load on the large piston?

    1. 750 N
    2. 3750 N
    3. 30 N
    4. 1.5 × 10⁴ N
    Show answer

    Answer: B. F₂ = F₁ × A₂/A₁ and the area ratio is the square of the diameter ratio: (10/2.0)² = 25. F₂ = 150 × 25 = 3750 N. Using the diameter ratio alone gives 750 N.

  5. 5. A barometer is made with an oil of density 900 kg m⁻³. On a day when the atmospheric pressure is 1.013 × 10⁵ Pa, the oil column would be about

    1. 0.76 m
    2. 8.7 m
    3. 11.5 m
    4. 113 m
    Show answer

    Answer: C. h = Pa/(ρg) = 1.013 × 10⁵/(900 × 9.8) = 1.013 × 10⁵/8820 ≈ 11.5 m.

  6. 6. Water flows at 2.0 m s⁻¹ through a hose of cross-section 4.0 cm² and leaves through a nozzle of cross-section 0.50 cm². What is its speed at the nozzle?

    1. 0.25 m s⁻¹
    2. 8.0 m s⁻¹
    3. 16 m s⁻¹
    4. 32 m s⁻¹
    Show answer

    Answer: C. Continuity: A₁v₁ = A₂v₂, so v₂ = 4.0 × 2.0/0.50 = 16 m s⁻¹.

  7. 7. In a horizontal pipe the pressure is 1.5 × 10⁵ Pa where water moves at 2.0 m s⁻¹. What is the pressure where the water moves at 8.0 m s⁻¹?

    1. 1.2 × 10⁵ Pa
    2. 1.8 × 10⁵ Pa
    3. 1.47 × 10⁵ Pa
    4. 0.9 × 10⁵ Pa
    Show answer

    Answer: A. P₂ = P₁ − ½ρ(v₂² − v₁²) = 1.5 × 10⁵ − 500 × (64 − 4) = 1.5 × 10⁵ − 3.0 × 10⁴ = 1.2 × 10⁵ Pa. Faster flow means lower pressure.

  8. 8. Bernoulli's equation reduces to P₁ − P₂ = ρg(h₂ − h₁) when

    1. the fluid is at rest
    2. the fluid is highly viscous
    3. the flow is turbulent
    4. the pipe is horizontal
    Show answer

    Answer: A. With v₁ = v₂ = 0 the kinetic terms vanish and the equation becomes the hydrostatic result P₁ + ρgh₁ = P₂ + ρgh₂. A horizontal pipe removes the height terms instead, and viscous or turbulent flow lies outside the equation altogether.

  9. 9. In a wind-tunnel test (made-up data) the air speed is 50 m s⁻¹ over a model wing and 45 m s⁻¹ under it. The wing area is 10 m² and the air density 1.2 kg m⁻³. What is the lift?

    1. 285 N
    2. 600 N
    3. 2850 N
    4. 5700 N
    Show answer

    Answer: C. ΔP = ½ρ(v_top² − v_bottom²) = 0.6 × (2500 − 2025) = 0.6 × 475 = 285 Pa. Lift = ΔP × A = 285 × 10 = 2850 N. The value 285 is the pressure difference, not the force.

  10. 10. A sphere of radius 2.0 mm and density 2.5 × 10³ kg m⁻³ falls through a liquid of density 1.0 × 10³ kg m⁻³ and viscosity 1.0 Pa s (made-up values). Its terminal velocity is about

    1. 1.3 cm s⁻¹
    2. 0.65 cm s⁻¹
    3. 5.2 cm s⁻¹
    4. 13 cm s⁻¹
    Show answer

    Answer: A. vt = 2a²(ρ − σ)g/(9η) = 2 × (2.0 × 10⁻³)² × 1.5 × 10³ × 9.8/(9 × 1.0) = 0.1176/9 = 0.0131 m s⁻¹ ≈ 1.3 cm s⁻¹.

  11. 11. Why does a raindrop falling through air eventually move at constant speed?

    1. Gravity stops acting on it
    2. The viscous drag, which grows with speed, plus the buoyant force becomes equal to its weight
    3. Air pressure below it becomes zero
    4. Its mass keeps decreasing as it falls
    Show answer

    Answer: B. Stokes' drag 6πηav increases with speed. When drag plus buoyancy equals the weight, the net force and the acceleration become zero, so the drop falls at its terminal velocity.

  12. 12. A plate of area 0.10 m² slides at 0.10 m s⁻¹ over a liquid film 0.50 mm thick whose viscosity is 0.50 Pa s. What force keeps it moving at constant speed?

    1. 1.0 N
    2. 0.10 N
    3. 100 N
    4. 10 N
    Show answer

    Answer: D. η = Fl/(Av), so F = ηAv/l = 0.50 × 0.10 × 0.10/(5.0 × 10⁻⁴) = 0.0050/0.00050 = 10 N.

  13. 13. What is the excess pressure inside a water drop of radius 0.50 mm? (S = 0.073 N m⁻¹)

    1. 146 Pa
    2. 292 Pa
    3. 584 Pa
    4. 73 Pa
    Show answer

    Answer: B. A drop has one surface: Pi − Po = 2S/r = 2 × 0.073/(5.0 × 10⁻⁴) = 0.146/0.0005 = 292 Pa. The 4S/r formula, which would give 584 Pa, is for a soap bubble.

  14. 14. How high does water rise in a clean glass tube of radius 0.20 mm? (S = 0.073 N m⁻¹, angle of contact ≈ 0)

    1. 3.7 cm
    2. 14.9 cm
    3. 0.74 cm
    4. 7.4 cm
    Show answer

    Answer: D. h = 2S cos θ/(ρga) = 2 × 0.073 × 1/(1000 × 9.8 × 2.0 × 10⁻⁴) = 0.146/1.96 = 0.0745 m ≈ 7.4 cm.

  15. 15. Assertion (A): A small drop of liquid with no external forces on it takes a spherical shape. Reason (R): For a given volume a sphere has the least surface area, and so the least surface energy.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Surface molecules carry extra energy, so a liquid takes the shape with the smallest surface area for its volume. That shape is a sphere, so R correctly explains A.

Questions 1-3: lesson 1 (pressure and Pascal's law). Questions 4-5: lesson 2 (barometers and hydraulic machines). Questions 6-8: lesson 3 (continuity and Bernoulli's equation). Questions 9-12: lesson 4 (dynamic lift, viscosity and Stokes' law). Questions 13-15: lesson 5 (surface tension).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery