• Foundation
  • About 20 min
  • 5 practice questions

Streamline flow, continuity and Bernoulli's principle

Describe steady (streamline) and turbulent flow, derive the equation of continuity Av = constant, and derive and apply Bernoulli's equation P + ½ρv² + ρgh = constant with its conditions.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define steady flow and a streamline, and explain why streamlines never cross.
  • Derive the equation of continuity A₁v₁ = A₂v₂ for an incompressible fluid.
  • Derive Bernoulli's equation from the work-energy theorem.
  • State the conditions under which Bernoulli's equation holds and apply it to pipes.

Turn a tap on gently and the water comes out as a smooth, glassy column; open it fully and the stream becomes rough and broken. The study of fluids in motion is fluid dynamics. For smooth flows two powerful rules, one from conservation of mass and one from conservation of energy, explain why water speeds up through a nozzle and why its pressure drops when it does.

Steady flow and streamlines

Flow is steady if the velocity of the fluid at any given point does not change with time. A particle may speed up as it moves to a new point, but every particle that later passes that point has the same velocity there. The path of a particle in steady flow is a streamline: a curve whose tangent at every point gives the direction of the fluid velocity there. No two streamlines can cross, because at the crossing a particle would have two possible velocities and the flow would not be steady. Steady flow happens at low speeds. Above a critical speed the flow becomes turbulent: irregular, with eddies and whirlpools, as in white-water rapids. Laminar flow is steady flow in which neighbouring layers slide smoothly past each other.

Streamline flow and turbulent flow

  • Streamline (steady) flow
    • Velocity at each point constant in time
    • Smooth paths that never cross
    • Low speeds, below the critical speed
    • Bernoulli's equation applies
  • Turbulent flow
    • Velocity at a point keeps fluctuating
    • Eddies and whirlpools
    • High speeds, above the critical speed
    • Bernoulli's equation does not apply

The equation of continuity

Consider a bundle of streamlines (a tube of flow) crossing areas A₁ and A₂ where the speeds are v₁ and v₂. In a short time Δt the mass crossing A₁ is ρ₁A₁v₁Δt and the mass crossing A₂ is ρ₂A₂v₂Δt. In steady flow mass is neither created nor stored between the two sections, so these masses are equal. For an incompressible fluid ρ₁ = ρ₂, giving:

Equation of continuity: A₁v₁ = A₂v₂, i.e. Av = constant (the volume flow rate). Where the pipe narrows, the fluid speeds up.

Worked example 1: water through a narrowing pipe

Water flows at 1.5 m s⁻¹ in a pipe of radius 2.0 cm that narrows to radius 1.0 cm. Speed in the narrow part: v₂ = v₁ × A₁/A₂ = v₁ × (r₁/r₂)² = 1.5 × (2.0/1.0)² = 6.0 m s⁻¹. Flow rate: Av = π × (0.020)² × 1.5 = 1.9 × 10⁻³ m³ s⁻¹, about 1.9 litres every second, the same through both sections.

Deriving Bernoulli's equation

When fluid speeds up there must be a net force on it, supplied by a pressure difference. Bernoulli (1738) connected pressure, speed and height using the work-energy theorem. Take an incompressible, non-viscous fluid in steady flow through a pipe whose area and height change, with pressure P₁, speed v₁, height h₁ at section 1 and P₂, v₂, h₂ at section 2.

  1. In time Δt the fluid at section 1 moves v₁Δt; the work done on it by the pressure behind is W₁ = P₁A₁v₁Δt = P₁ΔV.
  2. By continuity the same volume ΔV leaves section 2, where the fluid ahead does work −P₂ΔV on it. Net work = (P₁ − P₂)ΔV.
  3. The mass moved is Δm = ρΔV. Its kinetic energy changes by ΔK = ½ρΔV(v₂² − v₁²).
  4. Its potential energy changes by ΔU = ρgΔV(h₂ − h₁).
  5. Work-energy theorem: (P₁ − P₂)ΔV = ½ρΔV(v₂² − v₁²) + ρgΔV(h₂ − h₁).
  6. Divide by ΔV and rearrange: P₁ + ½ρv₁² + ρgh₁ = P₂ + ½ρv₂² + ρgh₂.

Bernoulli's principle: along a streamline, P + ½ρv² + ρgh = constant. Each term is an energy per unit volume (unit J m⁻³ = Pa).

Conditions: the flow must be steady (not turbulent), the fluid incompressible (its elastic energy is ignored) and non-viscous (no energy lost to internal friction). Real fluids have some viscosity, so the equation is approximate, but it works well for low-viscosity liquids. For a fluid at rest (v = 0) it reduces to P₁ − P₂ = ρg(h₂ − h₁), the result of lesson 1.

Worked example 2: pressure drop in a constriction

Water flows through a horizontal pipe. At a wide section the pressure is 2.0 × 10⁵ Pa and the speed 2.0 m s⁻¹; at a narrow section the speed is 6.0 m s⁻¹. Find the pressure there (ρ = 1000 kg m⁻³). With h₁ = h₂: P₂ = P₁ − ½ρ(v₂² − v₁²) = 2.0 × 10⁵ − ½ × 1000 × (36 − 4) = 2.0 × 10⁵ − 1.6 × 10⁴ = 1.84 × 10⁵ Pa. Where the speed is higher, the pressure is lower.

Worked example 3: a pipe that rises

Water flows at constant speed through a uniform pipe that rises 5.0 m. If the pressure at the bottom is 2.0 × 10⁵ Pa, what is it at the top? Same area, so same speed (continuity), and the kinetic terms cancel: P₂ = P₁ − ρg(h₂ − h₁) = 2.0 × 10⁵ − 1000 × 9.8 × 5.0 = 1.51 × 10⁵ Pa.

Key takeaways

  • Streamlines show steady flow and never cross; above the critical speed flow is turbulent.
  • Continuity (mass conservation): A₁v₁ = A₂v₂ for an incompressible fluid.
  • Bernoulli (energy conservation): P + ½ρv² + ρgh is constant along a streamline.
  • It needs steady, incompressible, non-viscous flow; faster flow means lower pressure at the same height.

Check your understanding

  1. 1. Water flows steadily through a pipe whose diameter is halved at a nozzle. How does the speed in the nozzle compare with the speed in the pipe?

    1. Half as large
    2. Twice as large
    3. Four times as large
    4. The same
    Show answer

    Answer: C. A₁v₁ = A₂v₂ and A ∝ d². Halving the diameter makes the area one quarter, so the speed becomes four times as large.

  2. 2. Why can two streamlines never cross in steady flow?

    1. Because the fluid would then be compressed
    2. Because at the crossing point a fluid particle would have two different velocities
    3. Because streamlines are always straight
    4. Because pressure is a scalar
    Show answer

    Answer: B. The tangent to a streamline gives the velocity at that point. If two crossed, the point would have two velocity directions, and the velocity there would not be fixed in time, which contradicts steady flow.

  3. 3. Water flows through a horizontal pipe. Its speed increases from 1.0 m s⁻¹ to 3.0 m s⁻¹ at a narrow part. By how much does the pressure fall? (ρ = 1000 kg m⁻³)

    1. 1000 Pa
    2. 2000 Pa
    3. 4000 Pa
    4. 8000 Pa
    Show answer

    Answer: C. For a horizontal pipe, P₁ − P₂ = ½ρ(v₂² − v₁²) = ½ × 1000 × (9 − 1) = 500 × 8 = 4000 Pa.

  4. 4. Which quantity has the same unit as each term of Bernoulli's equation?

    1. Energy per unit mass
    2. Energy per unit volume
    3. Force per unit length
    4. Momentum per unit volume
    Show answer

    Answer: B. ½ρv² is kinetic energy per unit volume and ρgh is potential energy per unit volume; both have unit J m⁻³, which equals N m⁻² = Pa, the unit of pressure P.

  5. 5. Assertion (A): Bernoulli's equation cannot be used to describe the flow of water through rapids in a river. Reason (R): Bernoulli's equation applies only to steady, non-viscous, incompressible flow, and flow through rapids is turbulent.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. In rapids the velocity and pressure at a point keep changing, so the flow is not steady and there are no fixed streamlines. Bernoulli's equation needs steady flow, so it does not apply; R explains A.

Privacy · Terms · Refunds · Delivery