• Foundation
  • About 30 min
  • 15 practice questions

Final self-assessment: Alcohols, Phenols and Ethers

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions in one sitting of about 30 minutes, without looking back at the lessons. The questions mix all five lessons, include reaction prediction and some calculations, and are harder on average than the lesson checks. Mark your answers first, then read every explanation.

Final self-assessment

  1. 1. How many structural isomers with formula C₄H₁₀O are alcohols, and how many are ethers?

    1. 3 alcohols and 4 ethers
    2. 4 alcohols and 2 ethers
    3. 4 alcohols and 3 ethers
    4. 5 alcohols and 3 ethers
    Show answer

    Answer: C. Alcohols: butan-1-ol, butan-2-ol, 2-methylpropan-1-ol, 2-methylpropan-2-ol (4). Ethers: 1-methoxypropane, 2-methoxypropane, ethoxyethane (3).

  2. 2. What is the IUPAC name of C₆H₅OC₂H₅?

    1. Phenoxyethane
    2. Ethoxybenzene
    3. Ethyl phenol
    4. Phenyl ethanol
    Show answer

    Answer: B. In ethers the larger group is the parent hydrocarbon and the smaller one is named as alkoxy: the benzene ring is the parent, giving ethoxybenzene (common name phenetole).

  3. 3. Assertion (A): The C–O–C bond angle in ethers is slightly greater than the tetrahedral angle. Reason (R): The two bulky alkyl groups on oxygen repel each other.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. In methoxymethane the angle is about 111.7°, above 109.5°, because repulsion between the two alkyl groups outweighs the lone-pair effect that narrows the angle in alcohols. R explains A.

  4. 4. Which alcohol is formed when 2-methylpropene undergoes hydroboration–oxidation?

    1. 2-Methylpropan-2-ol
    2. Butan-1-ol
    3. 2-Methylpropan-1-ol
    4. Butan-2-ol
    Show answer

    Answer: C. Boron adds to the CH₂ end (the carbon with more hydrogens) and is replaced by –OH, giving (CH₃)₂CHCH₂OH, 2-methylpropan-1-ol: the anti-Markovnikov result. Acid-catalysed hydration would give 2-methylpropan-2-ol.

  5. 5. Which pair gives butan-2-ol after hydrolysis?

    1. C₂H₅MgBr + CH₃CHO
    2. CH₃MgBr + CH₃COCH₃
    3. C₃H₇MgBr + HCHO
    4. CH₃MgBr + HCHO
    Show answer

    Answer: A. Ethylmagnesium bromide adds to ethanal: CH₃CHO + C₂H₅MgBr → CH₃CH(OMgBr)C₂H₅ → CH₃CH(OH)C₂H₅, butan-2-ol. The other pairs give 2-methylpropan-2-ol, butan-1-ol and ethanol.

  6. 6. In the cumene process, 240 g of cumene (120 g mol⁻¹) is fully converted. What mass of phenol (94 g mol⁻¹) and of acetone (58 g mol⁻¹) forms?

    1. 94 g phenol and 58 g acetone
    2. 188 g phenol and 116 g acetone
    3. 188 g phenol and 58 g acetone
    4. 240 g phenol and 116 g acetone
    Show answer

    Answer: B. n(cumene) = 240 ÷ 120 = 2.0 mol. Each mole gives 1 mol of phenol and 1 mol of acetone: phenol = 2.0 × 94 = 188 g; acetone = 2.0 × 58 = 116 g.

  7. 7. Which arrangement shows increasing acid strength?

    1. Phenol < ethanol < p-nitrophenol
    2. p-Cresol < phenol < ethanol
    3. Ethanol < p-nitrophenol < phenol
    4. Ethanol < p-cresol < phenol < p-nitrophenol
    Show answer

    Answer: D. pKa: ethanol 15.9, p-cresol 10.2, phenol 10.0, p-nitrophenol 7.1. A larger pKa means a weaker acid, so the order of increasing strength is ethanol < p-cresol < phenol < p-nitrophenol.

  8. 8. The pKa of a substituted phenol is 7.0 and that of phenol is 10.0. How many times stronger an acid is the substituted phenol?

    1. 3 times
    2. 30 times
    3. 1000 times
    4. 10 000 times
    Show answer

    Answer: C. Ka = 10^(−pKa), so the ratio is 10^(10.0 − 7.0) = 10³ = 1000.

  9. 9. Which observation is correct for the Lucas test at room temperature?

    1. Propan-2-ol gives turbidity instantly
    2. 2-Methylpropan-2-ol gives turbidity immediately; butan-1-ol gives none
    3. Butan-1-ol gives turbidity immediately
    4. None of the alcohols react
    Show answer

    Answer: B. Tertiary alcohols form alkyl chlorides fastest (stable tertiary carbocation), so 2-methylpropan-2-ol turns cloudy at once. Primary alcohols such as butan-1-ol give no turbidity at room temperature; secondary alcohols react after a while.

  10. 10. What is formed when the vapour of 2-methylpropan-2-ol is passed over copper heated to 573 K?

    1. 2-Methylpropanal
    2. Propanone
    3. 2-Methylpropanoic acid
    4. 2-Methylpropene
    Show answer

    Answer: D. Hot copper dehydrogenates 1° and 2° alcohols, but a tertiary alcohol has no hydrogen on the carbinol carbon, so it is dehydrated instead, giving the alkene 2-methylpropene.

  11. 11. Phenol is treated with sodium hydroxide and then with CO₂ under pressure, and finally acidified. What is the product?

    1. Salicylaldehyde
    2. Salicylic acid
    3. Benzoic acid
    4. Picric acid
    Show answer

    Answer: B. This is Kolbe's reaction: the phenoxide ion is attacked by the weak electrophile CO₂ at the ortho position; acidification gives o-hydroxybenzoic acid, salicylic acid.

  12. 12. Assertion (A): Picric acid is made by sulphonating phenol first and then nitrating, rather than by direct nitration with concentrated HNO₃. Reason (R): Direct nitration of phenol with concentrated nitric acid gives a poor yield.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Concentrated nitric acid also oxidises the very reactive phenol, so the direct yield of 2,4,6-trinitrophenol is poor. Converting phenol to phenol-2,4-disulphonic acid first and then nitrating gives a better yield. R explains A.

  13. 13. Which method is suitable for preparing methoxyethane?

    1. Heating a mixture of methanol and ethanol with concentrated H₂SO₄ at 413 K
    2. Sodium ethoxide with bromomethane
    3. Ethanol with HI
    4. Methanol with sodium metal only
    Show answer

    Answer: B. Williamson synthesis with a methyl halide and sodium ethoxide gives methoxyethane cleanly by SN2. Acid dehydration of a mixture of two alcohols would give three ethers (dimethyl, diethyl and ethyl methyl) together.

  14. 14. What are the products of heating CH₃–O–CH₂CH₃ with one equivalent of HI?

    1. CH₃I and CH₃CH₂OH
    2. CH₃OH and CH₃CH₂I
    3. CH₃I and CH₃CH₂I only
    4. CH₄ and CH₃CH₂OH
    Show answer

    Answer: A. Both groups are primary, so the reaction is SN2 and I⁻ attacks the less hindered carbon, the methyl group. Methyl iodide and ethanol form. (With excess HI, ethanol would go on to ethyl iodide.)

  15. 15. Bromination of anisole in ethanoic acid gives mainly which product?

    1. m-Bromoanisole
    2. Bromobenzene and methanol
    3. p-Bromoanisole
    4. 2,4,6-Tribromoanisole only
    Show answer

    Answer: C. The methoxy group activates the ring and directs ortho/para; the para position is less crowded, so p-bromoanisole is the main product (about 90%), with some o-bromoanisole. No FeBr₃ is needed.

Questions 1-3: lesson 1 (classification, names, structure). Questions 4-6: lesson 2 (preparation). Questions 7-10: lesson 3 (acidity and reactions of alcohols). Questions 11-12: lesson 4 (reactions of phenol). Questions 13-15: lesson 5 (ethers).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery