- Foundation
- About 30 min
- 15 practice questions
Final self-assessment: Alternating current
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions in one sitting of about 30 minutes. Take π ≈ 3.14 where needed. The questions mix all five lessons and include numericals and assertion-reason items. Check your answers only after finishing, and read every explanation.
Final self-assessment
-
1. A lamp rated 60 W, 240 V is connected to a 240 V ac supply. What is the peak current through it?
- 0.25 A
- 0.18 A
- 0.35 A
- 0.5 A
Show answer
Answer: C. rms current I = P/V = 60 ÷ 240 = 0.25 A. Peak current = √2 × 0.25 ≈ 0.35 A.
-
2. An ac voltage is v = 311 sin (314t) V. Which statement is correct?
- The rms voltage is 311 V and the frequency 314 Hz
- The rms voltage is 220 V and the frequency 50 Hz
- The rms voltage is 220 V and the frequency 314 Hz
- The rms voltage is 440 V and the frequency 50 Hz
Show answer
Answer: B. V = 311/√2 ≈ 220 V. ω = 314 rad s⁻¹ = 2πν gives ν = 314 ÷ 6.28 = 50 Hz.
-
3. Assertion (A): A household supply described as 220 V has a peak voltage of about 311 V. Reason (R): For a sinusoidal voltage the peak value is √2 times the rms value, and stated ac values are rms values.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. The 220 V is the rms value, and v_m = √2 × 220 ≈ 311 V. R explains A.
-
4. A 0.2 H inductor and a 100 μF capacitor are each connected in turn to the same 50 Hz supply. Which statement is correct?
- The inductor draws more current
- Both draw the same current
- The capacitor draws more current
- Neither draws any current
Show answer
Answer: C. X_L = 2π × 50 × 0.2 ≈ 62.8 Ω and X_C = 1 ÷ (2π × 50 × 100 × 10⁻⁶) ≈ 31.8 Ω. The smaller reactance passes the larger current, so the capacitor draws about twice as much.
-
5. A capacitor allows 0.2 A to flow from a 50 Hz supply. If the supply frequency is changed to 200 Hz at the same voltage, the current becomes
- 0.05 A
- 0.2 A
- 0.4 A
- 0.8 A
Show answer
Answer: D. X_C = 1/(2πνC) ∝ 1/ν. Making ν four times larger reduces X_C to a quarter, so the current becomes four times larger: 4 × 0.2 = 0.8 A.
-
6. In an ac circuit the current lags the voltage by π/2. The circuit contains
- only a resistor
- only a capacitor
- a resistor and a capacitor
- only an inductor
Show answer
Answer: D. A lag of exactly π/2 occurs for a pure inductor. A pure capacitor gives a lead of π/2, a resistor gives no phase difference, and an RC circuit gives a lead between 0 and π/2.
-
7. A resistor of 40 Ω and a capacitor of reactance 30 Ω are in series on 100 V rms. What is the current?
- 1.43 A
- 2 A
- 2.5 A
- 3.33 A
Show answer
Answer: B. Z = √(40² + 30²) = √2500 = 50 Ω. I = V/Z = 100 ÷ 50 = 2 A.
-
8. In a series LCR circuit, V_R = 80 V, V_L = 120 V and V_C = 60 V (rms). What is the supply voltage?
- 260 V
- 100 V
- 140 V
- 200 V
Show answer
Answer: B. V = √[V_R² + (V_L − V_C)²] = √[80² + 60²] = √(6400 + 3600) = √10 000 = 100 V. The voltages must be added as phasors.
-
9. For a series circuit with R = 4 Ω, X_L = 9 Ω and X_C = 6 Ω, the phase angle φ between current and voltage is about
- 53°, current leading
- 37°, current lagging
- 53°, current lagging
- 37°, current leading
Show answer
Answer: B. tan φ = (X_C − X_L)/R = (6 − 9)/4 = −3/4, so |φ| = tan⁻¹(0.75) ≈ 37°. Being negative (X_L > X_C), the circuit is inductive and the current lags.
-
10. A series LCR circuit has L = 2.0 H, C = 50 μF and R = 40 Ω. What is the resonant angular frequency?
- 100 rad s⁻¹
- 10 rad s⁻¹
- 1000 rad s⁻¹
- 16 rad s⁻¹
Show answer
Answer: A. ω₀ = 1/√(LC) = 1/√(2.0 × 50 × 10⁻⁶) = 1/√(10⁻⁴) = 1 ÷ 0.01 = 100 rad s⁻¹ (about 16 Hz).
-
11. For the circuit of the previous question on a 230 V supply at resonance, what is the rms voltage across the LC combination?
- 230 V
- 115 V
- Zero
- 460 V
Show answer
Answer: C. At resonance V_L = V_C and they are opposite in phase, so the voltage across the L and C together is zero; the whole 230 V appears across R.
-
12. A circuit takes 5 A at 200 V with a power factor of 0.8. What average power does it consume?
- 1000 W
- 1250 W
- 640 W
- 800 W
Show answer
Answer: D. P = VI cos φ = 200 × 5 × 0.8 = 800 W.
-
13. A transformer steps 220 V up to 3300 V. If the primary has 60 turns, how many turns does the secondary have?
- 4 turns
- 900 turns
- 3300 turns
- 15 turns
Show answer
Answer: B. N_s = N_p × V_s/V_p = 60 × 3300 ÷ 220 = 60 × 15 = 900 turns.
-
14. Which loss in a transformer is reduced by winding the primary and secondary coils one over the other?
- Flux leakage
- Eddy current loss
- Hysteresis loss
- Copper (I²R) loss
Show answer
Answer: A. Winding the coils over each other makes almost all the primary flux pass through the secondary, reducing flux leakage. Laminations reduce eddy currents, suitable core material reduces hysteresis, and thick wire reduces I²R loss.
-
15. Power is transmitted at 22 kV instead of 2.2 kV through the same line. By what factor is the line loss reduced (same power delivered)?
- 10
- √10
- 1000
- 100
Show answer
Answer: D. I = P/V falls by a factor of 10, and the loss I²R falls by 10² = 100.
Questions 1-3: lesson 1 (rms values and resistors). Questions 4-6: lesson 2 (inductors and capacitors). Questions 7-9: lesson 3 (series LCR, impedance and phase). Questions 10-12: lesson 4 (resonance and power). Questions 13-15: lesson 5 (transformers).
Sign in to keep track of the lessons you finish.