- Foundation
- About 30 min
- 15 practice questions
Final self-assessment: Semiconductor Electronics
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions in one sitting without looking back at the lessons. Work every numerical on paper first, with signs and units. The questions mix ideas from all five lessons, include assertion-reason items and are a little harder than the lesson checks. Check your answers only after you finish, and read every explanation, including those for questions you got right.
Final self-assessment
-
1. A solid has resistivity of about 10⁻⁷ Ω m. It is most likely
- an insulator
- a semiconductor
- a metal
- a vacuum
Show answer
Answer: C. Metals have resistivities of about 10⁻² to 10⁻⁸ Ω m; 10⁻⁷ Ω m falls in this range. Semiconductors and insulators have much higher resistivity.
-
2. The longest wavelength of light that can free an electron across the band gap of silicon (1.1 eV) is about (hc ≈ 1240 eV nm)
- 1130 nm
- 565 nm
- 113 nm
- 2260 nm
Show answer
Answer: A. λ_max = hc/E_g = 1240/1.1 ≈ 1130 nm, in the infrared. Shorter wavelengths have enough energy per photon.
-
3. Assertion (A): Tin belongs to the same group as carbon, silicon and germanium, but it is a metal. Reason (R): The band gap of tin is zero.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. With no gap between its valence and conduction bands, tin has plenty of free electrons and conducts like a metal. R explains A.
-
4. In pure silicon at room temperature, nᵢ = 1.5 × 10¹⁶ m⁻³ and there are 5 × 10²⁸ atoms m⁻³. The fraction of atoms that have contributed a free electron is about
- 3 × 10⁻¹³
- 3 × 10¹²
- 1.5 × 10⁻⁶
- 1
Show answer
Answer: A. Fraction = nᵢ / atom density = 1.5 × 10¹⁶ / 5 × 10²⁸ = 3 × 10⁻¹³. Pure silicon has very few carriers.
-
5. The motion of a hole in a semiconductor is really
- the motion of a positive ion through the lattice
- the motion of a free electron in the conduction band
- bound electrons moving from bond to bond to fill vacancies
- the motion of protons
Show answer
Answer: C. A hole is a missing electron in a bond. When a neighbouring bound electron fills it, the vacancy shifts. The hole's motion is a convenient description of these bound-electron jumps.
-
6. As the temperature of an intrinsic semiconductor rises, its resistivity
- rises steadily
- stays constant
- falls
- first rises then becomes infinite
Show answer
Answer: C. More thermal energy breaks more covalent bonds, creating more electron-hole pairs. More carriers mean higher conductivity, i.e. lower resistivity.
-
7. Silicon is doped with indium. The resulting semiconductor
- is n-type with electrons as majority carriers
- is p-type with holes as majority carriers
- is intrinsic
- carries a net negative charge
Show answer
Answer: B. Indium is trivalent, an acceptor. It creates holes, so the material is p-type with holes as majority carriers. It stays electrically neutral overall.
-
8. Silicon (nᵢ = 1.5 × 10¹⁶ m⁻³) is doped with acceptors so that nₕ = 3 × 10²² m⁻³. The electron concentration is
- 7.5 × 10⁹ m⁻³
- 1.5 × 10¹⁶ m⁻³
- 2 × 10⁶ m⁻³
- 4.5 × 10³⁸ m⁻³
Show answer
Answer: A. nₑ = nᵢ²/nₕ = (2.25 × 10³²)/(3 × 10²²) = 7.5 × 10⁹ m⁻³.
-
9. Assertion (A): The donor energy level in n-type silicon lies just below the bottom of the conduction band. Reason (R): Only about 0.05 eV is needed to free the extra electron of a pentavalent atom in silicon.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. Because the fifth electron is so weakly bound, its level E_D sits just below E_C, and a tiny energy lifts it into the conduction band. R explains A.
-
10. Why is the n-side of an unbiased p-n junction at a higher potential than the p-side?
- The n-side has more protons
- The n-side has lost electrons by diffusion, leaving positive donor ions
- Holes collect on the n-side
- The battery charges it
Show answer
Answer: B. Electrons diffuse from the n-side to the p-side, leaving behind fixed positive donor ions. The n-side becomes positive relative to the p-side, creating the barrier potential.
-
11. A silicon diode with barrier potential 0.7 V is forward biased by 0.4 V. The effective barrier height is
- 1.1 V
- 0.7 V
- 0.4 V
- 0.3 V
Show answer
Answer: D. Forward bias reduces the barrier: V₀ − V = 0.7 − 0.4 = 0.3 V.
-
12. The current in a reverse-biased p-n junction (below breakdown) is due mainly to
- majority carriers diffusing across
- minority carriers drifting across the junction
- electrons from the battery passing straight through
- breakdown of the crystal
Show answer
Answer: B. Reverse bias blocks majority-carrier diffusion. The small current that remains is the drift of minority carriers (electrons on the p-side, holes on the n-side) swept across by the junction field.
-
13. A full-wave rectifier is supplied with 60 Hz ac. The frequency of the ripple in its output is
- 30 Hz
- 60 Hz
- 120 Hz
- 240 Hz
Show answer
Answer: C. A full-wave rectifier produces one pulse in each half-cycle: two pulses per input cycle, so 2 × 60 = 120 Hz.
-
14. In a reverse-biased diode the current is 1 μA at a reverse voltage of 10 V. Its reverse resistance is
- 1 × 10⁷ Ω
- 1 × 10⁵ Ω
- 10 Ω
- 1 × 10⁻⁵ Ω
Show answer
Answer: A. R = V/I = 10/(1 × 10⁻⁶) = 1 × 10⁷ Ω, very large compared with the few ohms of forward bias.
-
15. A capacitor filter is added across the load of a rectifier. Which change makes the output dc steadier?
- Using a smaller capacitor
- Using a larger capacitor so that R_LC is much longer than the time between pulses
- Removing the load resistor
- Using a half-wave rather than a full-wave rectifier
Show answer
Answer: B. The capacitor discharges through R_L between pulses. A larger R_LC means less discharge in that time, so the voltage stays near the peak with less ripple. A full-wave rectifier also helps, because pulses come twice as often.
Questions 1-3: lesson 1 (classification and energy bands). Questions 4-6: lesson 2 (intrinsic semiconductors). Questions 7-9: lesson 3 (doping). Questions 10-12: lesson 4 (the p-n junction). Questions 13-15: lesson 5 (characteristics, rectifiers and filters).
Sign in to keep track of the lessons you finish.