Revision notes

Polymers: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Monomers, polymers and where polymers come from

TypeMeaningExamples
Naturalfound in plants and animalsstarch, cellulose, proteins, natural rubber, nucleic acids
Semi-syntheticnatural polymers chemically modifiedcellulose acetate (rayon), cellulose nitrate, vulcanised rubber
Syntheticmade entirely in the laboratory or factorypolythene, PVC, nylon-6,6, terylene, Buna-S, bakelite

Polymer = many monomer units joined by covalent bonds. Degree of polymerisation = molar mass of polymer ÷ molar mass of repeat unit.

Key takeaways: a polymer is a chain of repeat units built from monomers; DP tells you how many units are in a chain; for addition polymers the repeat unit has the monomer's formula, so DP is a simple division; and polymers come from nature, from modified natural materials, or from wholly synthetic routes.

Read the full lesson

Lesson 2

Classifying polymers by structure and by forces

ClassForces between chainsTypical behaviourExamples
Elastomersweakest (van der Waals); a few cross-linksstretch and spring backvulcanised rubber, Buna-S, Buna-N, neoprene
Fibresstrongest, such as hydrogen bondshigh tensile strength, thread-formingnylon-6,6, terylene
Thermoplasticsintermediatesoften on heating, harden on cooling, can be remouldedpolythene, PVC, polystyrene
Thermosettingchains become heavily cross-linked on heatingset hard and cannot be remeltedbakelite, urea-formaldehyde resins

Forces between chains: elastomers < thermoplastics < fibres. Cross-linked network = thermosetting = cannot be remelted.

Key takeaways: straight chains pack better than branched ones; the strength of forces between chains decides whether a polymer is an elastomer, a thermoplastic or a fibre; and permanent covalent cross-links make thermosetting polymers that set hard once and for all.

Read the full lesson

Lesson 3

Addition polymerisation

PolymerMonomerA typical use
Polytheneethene, CH2=CH2bags, bottles, pipes
Polypropenepropene, CH2=CH−CH3ropes, crates
Polyvinyl chloride (PVC)vinyl chloride, CH2=CHClpipes, raincoats, insulation
Teflon (polytetrafluoroethene)tetrafluoroethene, CF2=CF2non-stick coatings
Polyacrylonitrile (orlon, acrilan)acrylonitrile, CH2=CH−CNwool-like fibres
Polystyrenestyrene, C6H5−CH=CH2packing material, disposable cups

Addition polymerisation: double bonds open, monomers join end to end, nothing is lost. Repeat unit = monomer formula. Steps: initiation, propagation, termination.

Key takeaways: addition polymers come from monomers with C=C; the free radical mechanism has three steps; LDPE (branched, free radical, high pressure) and HDPE (linear, Ziegler–Natta) differ in structure and properties; and since no atoms are lost, masses and percentages carry straight over from monomer to polymer.

Read the full lesson

Lesson 4

Condensation polymerisation and copolymers

Condensation polymer: two reactive groups per monomer, a small molecule (usually water) lost at each link. Repeat unit mass = sum of monomers − mass of molecules lost.

Key takeaways: condensation polymers grow step by step and lose a small molecule at each link; nylons are polyamides and terylene is a polyester; bakelite and melamine polymers are cross-linked resins; and Buna-S and Buna-N are copolymers of butadiene with styrene and with acrylonitrile.

Read the full lesson

Lesson 5

Rubber, molecular mass of polymers and biodegradable polymers

Mn = ΣNiMi ÷ ΣNi; Mw = ΣNiMi^2 ÷ ΣNiMi; PDI = Mw ÷ Mn ≥ 1. Vulcanisation = heating rubber with sulphur to form cross-links.

Key takeaways: natural rubber is elastic because its cis chains are coiled and weakly held; sulphur cross-links make it tougher; Mw is always at least Mn because heavy chains count more; and biodegradable polymers such as PHBV and nylon-2–nylon-6 carry links that microorganisms can break.

Read the full lesson

Lesson 6

Natural polymers: starch, cellulose, proteins and nucleic acids

Natural polymers at a glance
PolymerMonomerLink formedExample
StarchGlucoseGlycosidic link (water lost)Potato, rice
CelluloseGlucoseGlycosidic link (water lost)Cotton, wood
ProteinAmino acidsPeptide bond –CO–NH–Wool, silk, enzymes
Nucleic acidNucleotidesPhosphate linkDNA, RNA

The four natural polymers in this lesson are condensation polymers: every link formed loses one molecule of water (natural rubber, an addition polymer of isoprene, is an exception). Polysaccharides come from sugars, proteins from amino acids.

— Rule to remember
  • Starch and cellulose are glucose polymers.
  • Proteins are polymers of amino acids joined by peptide bonds.
  • Nucleic acids are polymers of nucleotides.
Read the full lesson

Lesson 7

Writing repeat units: from monomer to polymer in three steps

Common monomers and their polymers
MonomerPolymer repeat unitPolymer name
CH₂=CH₂ (ethene)–[CH₂–CH₂]ₙ–Polythene
CH₂=CH–CH₃ (propene)–[CH₂–CH(CH₃)]ₙ–Polypropene
CH₂=CHCl (chloroethene)–[CH₂–CHCl]ₙ–Polyvinyl chloride (PVC)
CH₂=CH–C₆H₅ (styrene)–[CH₂–CH(C₆H₅)]ₙ–Polystyrene
CF₂=CF₂ (tetrafluoroethene)–[CF₂–CF₂]ₙ–Teflon

Addition polymer: open the C=C, join end to end, nothing lost. Monomer mass = repeat unit mass. Molar mass of polymer = DP × repeat unit mass.

— Rule to remember
Read the full lesson

Lesson 8

More polymers to know: monomers, properties and uses

Quick reference
PolymerMonomer(s)ClassUse
PMMAMethyl methacrylateThermoplasticTransparent sheets, lenses
PVAVinyl acetateThermoplasticAdhesives, paints
PolyacrylonitrileAcrylonitrileThermoplasticAcrylic fibres
BakelitePhenol and methanalThermosettingSwitches, handles
Melamine resinMelamine and methanalThermosettingTableware
Urea resinUrea and methanalThermosettingAdhesives

Thermoplastic: softens on heating and can be re-moulded. Thermosetting: forms a cross-linked network when made and cannot be softened again.

— Rule to remember
  • PMMA, PVA and polyacrylonitrile are addition polymers.
  • Bakelite, melamine and urea resins are thermosetting resins from methanal.
  • The repeat unit of an addition polymer has the same mass as its monomer.
Read the full lesson

Lesson 9

Plastics, waste and the environment: reduce, reuse, recycle

Strong C–C bonds make plastics non-biodegradable. Thermoplastics can be recycled by melting; thermosets cannot. Burning chlorine-containing plastics releases hydrogen chloride.

— Rule to remember
Read the full lesson

Privacy · Terms · Refunds · Delivery