• Foundation
  • About 13 min
  • 5 practice questions

Classifying polymers by structure and by forces

Sort polymers by chain structure (linear, branched, cross-linked) and by intermolecular forces (elastomers, fibres, thermoplastics, thermosetting), and link each to its properties.

If something looks wrong, please tell us.

Why does a polythene bag stretch and melt, a nylon thread stay strong, a rubber band snap back and a bakelite switch never soften? The answers lie in two things: the shape of the polymer chains and the strength of the forces between them. This lesson gives you both classifications and shows how to reason from structure to property.

Classification by structure

  • Linear polymers: long, straight chains that pack closely, so they have high density and higher melting points. Examples: high density polythene (HDPE), PVC.
  • Branched-chain polymers: chains carry side branches that stop close packing, so density and melting point are lower. Example: low density polythene (LDPE).
  • Cross-linked (network) polymers: chains are joined to each other by strong covalent bonds into a three-dimensional network, giving hard, rigid materials. Examples: bakelite, melamine-formaldehyde polymer.

Classification by intermolecular forces

ClassForces between chainsTypical behaviourExamples
Elastomersweakest (van der Waals); a few cross-linksstretch and spring backvulcanised rubber, Buna-S, Buna-N, neoprene
Fibresstrongest, such as hydrogen bondshigh tensile strength, thread-formingnylon-6,6, terylene
Thermoplasticsintermediatesoften on heating, harden on cooling, can be remouldedpolythene, PVC, polystyrene
Thermosettingchains become heavily cross-linked on heatingset hard and cannot be remeltedbakelite, urea-formaldehyde resins

In elastomers the weak forces let chains slide and uncoil when pulled, while the few cross-links pull them back when released. In fibres, strong forces such as hydrogen bonds between amide groups hold chains tightly side by side. Thermoplastics have no cross-links, so heat lets chains move past each other. Thermosetting polymers start as small, partly formed chains that cross-link permanently when heated in a mould.

Homopolymers and copolymers

A homopolymer is made from one kind of monomer, such as polythene from ethene. A copolymer is made from two or more different monomers in the same chain, such as Buna-S from 1,3-butadiene and styrene. Do not confuse a copolymer with a condensation polymer made from two monomers: nylon-6,6 also uses two monomers, but the term copolymer is normally used for chains formed from mixed addition monomers.

Worked example 1: why nylon makes a good thread

Step 1: nylon-6,6 chains contain many amide groups, −CO−NH−. Step 2: the N−H of one chain forms hydrogen bonds with the C=O of a neighbouring chain. Step 3: these strong, regularly spaced attractions hold the chains in tight, ordered bundles. Step 4: strong forces mean high tensile strength, so nylon is a fibre, used for ropes and fabrics.

Worked example 2: why a bakelite switch does not soften

Step 1: bakelite is formed when phenol and formaldehyde react and the chains then join at many points. Step 2: these joins are covalent bonds, so the whole object behaves almost like one giant molecule. Step 3: heat cannot make chains slide past each other without breaking covalent bonds. Step 4: so bakelite is thermosetting; it chars rather than melts, which makes it suitable for electrical switches and handles. By contrast, polythene has separate chains held only by weak forces, so it softens and can be remoulded: a thermoplastic.

Both classifications can apply to one polymer at the same time. Polythene, for instance, is a thermoplastic whichever way it is made, but its low density form is branched and its high density form is linear, so the two feel quite different in the hand. When an exam asks you to classify, read carefully whether it wants the structure, the forces or the source.

Forces between chains: elastomers < thermoplastics < fibres. Cross-linked network = thermosetting = cannot be remelted.

Key takeaways: straight chains pack better than branched ones; the strength of forces between chains decides whether a polymer is an elastomer, a thermoplastic or a fibre; and permanent covalent cross-links make thermosetting polymers that set hard once and for all.

Check your understanding

  1. 1. Bakelite is an example of a

    1. thermosetting polymer
    2. thermoplastic polymer
    3. elastomer
    4. fibre
    Show answer

    Answer: A. Bakelite forms a heavily cross-linked network on heating and cannot be softened again, so it is thermosetting.

  2. 2. Which class of polymers has the strongest intermolecular forces between chains?

    1. Elastomers
    2. Thermoplastics
    3. Fibres
    4. All are equal
    Show answer

    Answer: C. Fibres such as nylon-6,6 have strong forces such as hydrogen bonds between chains, giving high tensile strength.

  3. 3. Low density polythene has which kind of structure?

    1. Linear
    2. Cross-linked network
    3. Ring-shaped
    4. Branched-chain
    Show answer

    Answer: D. LDPE chains carry many branches, which stop close packing and give it a low density.

  4. 4. Which of these is a copolymer?

    1. Polythene
    2. Buna-S
    3. PVC
    4. Polystyrene
    Show answer

    Answer: B. Buna-S is formed from two different monomers, 1,3-butadiene and styrene, in the same chain. The others each come from one monomer.

  5. 5. Which of these is a thermoplastic?

    1. PVC
    2. Bakelite
    3. Melamine-formaldehyde polymer
    4. Urea-formaldehyde resin
    Show answer

    Answer: A. PVC has separate chains with intermediate forces, so it softens on heating and can be remoulded. The others are cross-linked thermosetting polymers.

Sign in to keep track of the lessons you finish.

Next lesson → Addition polymerisation

Privacy · Terms · Refunds · Delivery