- Foundation
- About 14 min
- 5 practice questions
Plastics, waste and the environment: reduce, reuse, recycle
Explain why many plastics persist, what happens when they burn, how thermoplastics are recycled, and calculate carbon dioxide and hydrogen chloride from burning.
If something looks wrong, please tell us.
Plastics are cheap, light and long-lasting, and those same qualities make them a problem once they are thrown away. Understanding the chemistry behind the problem helps us choose better, and it is a regular topic in general science questions.
Why plastics persist
The carbon-carbon bonds in the backbone of addition polymers are strong. Most microorganisms have no enzymes that can break them, so these polymers are non-biodegradable. Plastic waste then stays in landfills, drains and water bodies for a very long time, and it slowly breaks into smaller and smaller fragments rather than disappearing.
What happens when plastics burn
- Burning in plenty of air converts the carbon to carbon dioxide and the hydrogen to water.
- Burning in a poor supply of air gives carbon monoxide, which is poisonous, and soot.
- A plastic containing chlorine, such as PVC, releases hydrogen chloride gas when it burns. This is poisonous and corrosive, so such plastic should never be burnt in the open.
Recycling
Thermoplastics soften on heating, so they can be collected, melted and re-moulded. Thermosetting plastics cannot be melted again and are much harder to recycle. Plastic items carry a small triangle with a number from 1 to 7, which tells the sorter the type: 1 is PET (used for bottles), 2 is high-density polythene, 3 is PVC, 4 is low-density polythene, 5 is polypropene, 6 is polystyrene and 7 stands for other types.
The three Rs
- Reduce: use less plastic, for example by refusing unnecessary packaging.
- Reuse: use containers and bags again.
- Recycle: send sorted plastic to be melted and made into new items.
Strong C–C bonds make plastics non-biodegradable. Thermoplastics can be recycled by melting; thermosets cannot. Burning chlorine-containing plastics releases hydrogen chloride.
Worked example 1: carbon dioxide from polythene
What mass of carbon dioxide forms when 28 g of polythene burns completely? The repeat unit is CH₂ (14 g/mol), so 28 g is 28 ÷ 14 = 2 mol of CH₂ units. Each unit gives one CO₂: (CH₂) + 1.5O₂ → CO₂ + H₂O. So 2 mol of CO₂ form, with mass 2 × 44 = 88 g.
Worked example 2: hydrogen chloride from PVC
What is the maximum mass of hydrogen chloride from burning 125 g of PVC (repeat unit C₂H₃Cl = 62.5; HCl = 36.5)? The sample contains 125 ÷ 62.5 = 2 mol of repeat units, each of which holds one chlorine atom. Maximum HCl = 2 mol = 2 × 36.5 = 73 g. This is 73 ÷ 125 = 58.4% of the mass of the plastic.
Worked example 3: carbon content
What is the percentage of carbon in polythene? The repeat unit CH₂ has mass 14 with 12 from carbon. Percentage = 12 ÷ 14 × 100 = 85.7%. In terms of the monomer C₂H₄ the figure is the same: 24 ÷ 28 × 100 = 85.7%.
Worked example 4: sorting waste
A bin of mixed plastic waste has bottles marked 1 and cups marked 6. Which can be recycled by melting? Both PET (1) and polystyrene (6) are thermoplastics, so both can be melted and re-moulded, provided they are sorted by type first, because different plastics do not mix well.
Check your understanding
-
1. Why are most addition polymers non-biodegradable?
- They are made entirely of carbon atoms and nothing else
- They dissolve slowly in water over a long period
- They have strong C–C bonds that microbes cannot break
- They are too light in weight to ever reach the soil
Show answer
Answer: C. The strong C–C backbone lacks bonds that microbial enzymes can attack, so it persists in the environment.
-
2. Which plastic releases hydrogen chloride gas on burning?
- Polythene
- Polypropene
- Polystyrene
- PVC
Show answer
Answer: D. PVC contains chlorine, which is released as HCl when it burns.
-
3. What mass of CO₂ forms when 28 g of polythene burns completely (CH₂ = 14, CO₂ = 44)?
- 44 g
- 88 g
- 28 g
- 132 g
Show answer
Answer: B. 28 g is 2 mol of CH₂ units, each giving one CO₂: 2 × 44 = 88 g.
-
4. Which type of plastic can be melted and re-moulded again?
- A thermoplastic
- A thermosetting plastic
- A cross-linked resin
- Bakelite
Show answer
Answer: A. Thermoplastics soften on heating, so they can be recycled by melting.
-
5. What is the maximum mass of HCl from burning 125 g of PVC (repeat unit 62.5, HCl = 36.5)?
- 36.5 g
- 146 g
- 73 g
- 62.5 g
Show answer
Answer: C. 125 g is 2 mol of repeat units, each releasing at most one HCl: 2 × 36.5 = 73 g.
Sign in to keep track of the lessons you finish.