• Foundation
  • About 14 min
  • 5 practice questions

Writing repeat units: from monomer to polymer in three steps

Draw the repeat unit of an addition polymer from its monomer, work backwards from a repeat unit to the monomer, and calculate molar masses from the degree of polymerisation.

If something looks wrong, please tell us.

Every exam on polymers asks you to go from a monomer to a polymer, or back again. The skill is simple once you see the pattern: the C=C bond opens and the units join end to end. This lesson gives the three steps and the common cases.

Three steps for an addition polymer

  1. Write the monomer with its C=C double bond, for example CH₂=CHX.
  2. Open the double bond. Each carbon now has a free bond reaching to the neighbouring unit.
  3. Put the repeat unit in brackets, with the free bonds drawn outside, and write n for the number of units: –[CH₂–CHX]ₙ–.

Nothing is lost in this process, so the repeat unit has exactly the same formula and mass as the monomer.

Common monomers and their polymers
MonomerPolymer repeat unitPolymer name
CH₂=CH₂ (ethene)–[CH₂–CH₂]ₙ–Polythene
CH₂=CH–CH₃ (propene)–[CH₂–CH(CH₃)]ₙ–Polypropene
CH₂=CHCl (chloroethene)–[CH₂–CHCl]ₙ–Polyvinyl chloride (PVC)
CH₂=CH–C₆H₅ (styrene)–[CH₂–CH(C₆H₅)]ₙ–Polystyrene
CF₂=CF₂ (tetrafluoroethene)–[CF₂–CF₂]ₙ–Teflon

Addition polymer: open the C=C, join end to end, nothing lost. Monomer mass = repeat unit mass. Molar mass of polymer = DP × repeat unit mass.

— Rule to remember

Working backwards

Given a repeat unit, find the monomer by closing the bonds at the ends: replace the two outer bonds by a double bond between the two backbone carbons. For –[CH₂–CHCl]ₙ– the monomer is CH₂=CHCl.

Side groups and properties

In the formula CH₂=CHX, the group X controls the properties of the polymer. When X is hydrogen the chain is simple polythene. A chlorine atom (PVC) makes the chain stiffer and gives a plastic used for pipes. A benzene ring (polystyrene) makes it rigid and brittle. Fluorine atoms (Teflon) make it unreactive and non-stick. The same three steps work for every one of them.

Worked example 1: PVC

Find the molar mass of PVC with DP = 800 (C = 12, H = 1, Cl = 35.5). The repeat unit C₂H₃Cl has mass 24 + 3 + 35.5 = 62.5. Molar mass = 800 × 62.5 = 50 000 g/mol. The percentage of chlorine is 35.5 ÷ 62.5 × 100 = 56.8%.

Worked example 2: polypropene

A sample of polypropene has an average molar mass of 42 000 g/mol. Find the DP. The repeat unit is C₃H₆, with mass 36 + 6 = 42. DP = 42 000 ÷ 42 = 1000.

Worked example 3: polystyrene

What is the molar mass of polystyrene with DP = 100? Styrene is C₈H₈, with mass 96 + 8 = 104. Molar mass = 100 × 104 = 10 400 g/mol.

Worked example 4: mass of polymer from monomer

What mass of PVC forms from 125 g of chloroethene? Because addition loses nothing, the polymer has the same mass: 125 g. In moles, 125 ÷ 62.5 = 2 mol of monomer forms 2 mol of repeat units, weighing 2 × 62.5 = 125 g.

Worked example 5: fluorine in Teflon

What is the percentage of fluorine in Teflon, repeat unit C₂F₄ (C = 12, F = 19)? Mass of the repeat unit = 24 + 4 × 19 = 24 + 76 = 100. Percentage of fluorine = 76 ÷ 100 × 100 = 76%.

Common mistakes

  • Keeping the double bond in the repeat unit. The polymer chain is saturated.
  • Writing the bracket without the free bonds or without n.
  • Forgetting that DP counts repeat units, not atoms.

Check your understanding

  1. 1. What is the repeat unit of polypropene?

    1. –[CH₂–CH₂]ₙ–
    2. –[CF₂–CF₂]ₙ–
    3. –[CH₂–CH(CH₃)]ₙ–
    4. –[CH₂–CHCl]ₙ–
    Show answer

    Answer: C. Propene, CH₂=CH–CH₃, opens its double bond to give –[CH₂–CH(CH₃)]ₙ–.

  2. 2. The repeat unit of a polymer is –[CH₂–CHCl]ₙ–. What is its monomer?

    1. CH₃–CH₂Cl
    2. CHCl=CHCl
    3. CH₂=CH₂
    4. CH₂=CHCl
    Show answer

    Answer: D. Closing the end bonds gives a C=C double bond between the two backbone carbons: CH₂=CHCl.

  3. 3. What is the molar mass of polystyrene with DP = 100 (styrene C₈H₈ = 104)?

    1. 10 400 g/mol
    2. 1040 g/mol
    3. 104 g/mol
    4. 100 400 g/mol
    Show answer

    Answer: A. Molar mass = 100 × 104 = 10 400 g/mol.

  4. 4. What mass of PVC forms from 125 g of chloroethene (62.5 g/mol)?

    1. 62.5 g
    2. 250 g
    3. 125 g
    4. 187.5 g
    Show answer

    Answer: C. Nothing is lost in addition polymerisation, so the polymer mass equals the monomer mass, 125 g.

  5. 5. A polypropene sample has an average molar mass of 42 000 g/mol. What is its degree of polymerisation (C₃H₆ = 42)?

    1. 500
    2. 1000
    3. 2000
    4. 4200
    Show answer

    Answer: B. DP = 42 000 ÷ 42 = 1000.

Privacy · Terms · Refunds · Delivery