• Foundation
  • About 13 min
  • 5 practice questions

Addition polymerisation

Describe chain-growth (addition) polymerisation by the free radical mechanism and name the monomers of polythene, PVC, Teflon, polyacrylonitrile and polystyrene.

If something looks wrong, please tell us.

Most plastics in daily use are made by addition polymerisation: monomers with a carbon–carbon double bond open up and join end to end. Nothing is lost in the process, which makes calculations easy. This lesson shows how the chain grows, step by step, and lists the common addition polymers with their monomers.

What happens in addition polymerisation

In addition (chain-growth) polymerisation, molecules of an unsaturated monomer, usually an alkene or a substituted alkene, add to the end of a growing chain one after another. The double bond of each monomer opens to form two single bonds, one to the chain and one ready for the next monomer. No small molecule is released, so the repeat unit has exactly the same atoms as the monomer and the polymer's mass equals the total mass of monomer used.

The free radical mechanism

  1. Initiation: an initiator such as benzoyl peroxide splits on heating to give a free radical (a species with an unpaired electron, here a phenyl radical). The radical adds to the double bond of a monomer, creating a new, larger radical.
  2. Propagation: the new radical adds to another monomer, which makes a still larger radical, and this repeats thousands of times. The chain grows very quickly.
  3. Termination: two radicals meet and join (or otherwise pair up their electrons), which ends the growth of both chains.

Common addition polymers

PolymerMonomerA typical use
Polytheneethene, CH2=CH2bags, bottles, pipes
Polypropenepropene, CH2=CH−CH3ropes, crates
Polyvinyl chloride (PVC)vinyl chloride, CH2=CHClpipes, raincoats, insulation
Teflon (polytetrafluoroethene)tetrafluoroethene, CF2=CF2non-stick coatings
Polyacrylonitrile (orlon, acrilan)acrylonitrile, CH2=CH−CNwool-like fibres
Polystyrenestyrene, C6H5−CH=CH2packing material, disposable cups

Two kinds of polythene

Low density polythene (LDPE) is made by polymerising ethene at high pressure in the presence of a trace of oxygen or a peroxide initiator; the free radical route gives highly branched chains, so it is soft, flexible and used for squeeze bottles and films. High density polythene (HDPE) is made at lower pressure and temperature with a Ziegler–Natta catalyst (triethylaluminium with titanium tetrachloride); its chains are linear, pack closely and give a tougher, harder plastic used for buckets and pipes.

Worked example 1: PVC

Write the repeat unit and find the molar mass for DP = 1500. The C=C of vinyl chloride opens, so the repeat unit is −CH2−CHCl−, formula C2H3Cl. Molar mass of repeat unit = 2 × 12 + 3 × 1 + 35.5 = 62.5 g/mol. Polymer molar mass = 1500 × 62.5 = 93 750 g/mol.

Worked example 2: Teflon

The repeat unit of Teflon is −CF2−CF2−, C2F4 = 2 × 12 + 4 × 19 = 100 g/mol. A chain of molar mass 50 000 g/mol has DP = 50 000 ÷ 100 = 500. The mass percentage of fluorine in Teflon is 76 ÷ 100 × 100 = 76%, the same as in the monomer, because addition polymerisation loses no atoms.

Worked example 3: counting chains

2.8 kg of ethene is completely polymerised into polythene with an average DP of 1000. Mass of polythene = 2.8 kg (no atoms lost). Molar mass of a chain = 1000 × 28 = 28 000 g/mol. Moles of chains = 2800 g ÷ 28 000 = 0.1 mol, which is 0.1 × 6.022 × 10^23 = 6.0 × 10^22 chains.

Addition polymerisation: double bonds open, monomers join end to end, nothing is lost. Repeat unit = monomer formula. Steps: initiation, propagation, termination.

Key takeaways: addition polymers come from monomers with C=C; the free radical mechanism has three steps; LDPE (branched, free radical, high pressure) and HDPE (linear, Ziegler–Natta) differ in structure and properties; and since no atoms are lost, masses and percentages carry straight over from monomer to polymer.

Check your understanding

  1. 1. Which substance is commonly used to start free radical addition polymerisation?

    1. Benzoyl peroxide
    2. Sodium chloride
    3. Sulphuric acid
    4. Glucose
    Show answer

    Answer: A. Benzoyl peroxide breaks up on heating to give free radicals, which start the chain by adding to a monomer's double bond.

  2. 2. High density polythene is prepared using

    1. oxygen at very high pressure
    2. a Ziegler–Natta catalyst
    3. sulphur and heat
    4. formaldehyde
    Show answer

    Answer: B. HDPE is made with a Ziegler–Natta catalyst (triethylaluminium and titanium tetrachloride), which gives linear chains.

  3. 3. The monomer of Teflon is

    1. vinyl chloride
    2. acrylonitrile
    3. tetrafluoroethene
    4. styrene
    Show answer

    Answer: C. Teflon is polytetrafluoroethene, made from CF2=CF2.

  4. 4. Orlon (polyacrylonitrile) is made from

    1. styrene
    2. ethene
    3. caprolactam
    4. acrylonitrile
    Show answer

    Answer: D. Polyacrylonitrile is the addition polymer of acrylonitrile, CH2=CH−CN.

  5. 5. A polystyrene chain has DP = 300. Its molar mass is (C = 12, H = 1)

    1. 31 200 g/mol
    2. 15 600 g/mol
    3. 3120 g/mol
    4. 30 000 g/mol
    Show answer

    Answer: A. Repeat unit C8H8 = 8 × 12 + 8 × 1 = 104 g/mol. Molar mass = 300 × 104 = 31 200 g/mol.

Privacy · Terms · Refunds · Delivery