- Foundation
- About 14 min
- 5 practice questions
More polymers to know: monomers, properties and uses
Recall the monomers, class and uses of PMMA, polyvinyl acetate, melamine and urea resins, and calculate repeat-unit masses and chain lengths for them.
If something looks wrong, please tell us.
Several polymers appear again and again in questions on everyday materials. Each should be remembered with its monomer, its class (thermoplastic or thermosetting) and a typical use. A few are addition polymers and two are resins made by condensation.
Addition polymers
- Polymethyl methacrylate (PMMA) is the transparent plastic called acrylic or Perspex. It is made from methyl methacrylate and is used for windows, lenses and signboards. It is a thermoplastic.
- Polyvinyl acetate (PVAc) is made from vinyl acetate (CH₃COOCH=CH₂). It is a soft thermoplastic used in adhesives and paints.
- Polyacrylonitrile is made from acrylonitrile, CH₂=CH–CN. It is spun into acrylic fibres used as a wool substitute.
Thermosetting resins
- Bakelite is made from phenol and methanal (formaldehyde). It is hard and does not melt, so it is used for switches and handles.
- Melamine-formaldehyde is made from melamine and methanal. It is hard, heat-resistant and scratch-resistant and is used for tableware and laminates.
- Urea-formaldehyde is made from urea and methanal and is used in adhesives for plywood and in electrical fittings.
| Polymer | Monomer(s) | Class | Use |
|---|---|---|---|
| PMMA | Methyl methacrylate | Thermoplastic | Transparent sheets, lenses |
| PVA | Vinyl acetate | Thermoplastic | Adhesives, paints |
| Polyacrylonitrile | Acrylonitrile | Thermoplastic | Acrylic fibres |
| Bakelite | Phenol and methanal | Thermosetting | Switches, handles |
| Melamine resin | Melamine and methanal | Thermosetting | Tableware |
| Urea resin | Urea and methanal | Thermosetting | Adhesives |
Thermoplastic: softens on heating and can be re-moulded. Thermosetting: forms a cross-linked network when made and cannot be softened again.
The two kinds differ in structure, not in the idea of a polymer. A thermoplastic has separate chains held by weak forces, which can slip when warm. A thermosetting resin has chains joined by strong covalent cross-links formed during the setting reaction, so heating does not make them flow. This is why a thermoplastic can be recycled by melting, while a thermosetting article can only be reused whole or ground up as filler.
Worked example 1: PMMA repeat unit
Methyl methacrylate is CH₂=C(CH₃)COOCH₃ with formula C₅H₈O₂. Its mass is 5 × 12 + 8 + 2 × 16 = 60 + 8 + 32 = 100. Because PMMA is an addition polymer, the repeat unit has the same formula and mass, 100. A PMMA chain with DP = 500 has a molar mass of 500 × 100 = 50 000 g/mol.
Worked example 2: polyvinyl acetate
What is the molar mass of the repeat unit of PVA? Vinyl acetate is CH₃COOCH=CH₂, formula C₄H₆O₂. Mass = 48 + 6 + 32 = 86. The repeat unit is also 86. So 86 g of vinyl acetate gives 86 g of polymer, and a chain with DP = 1000 has a molar mass of 86 000 g/mol.
Worked example 3: telling the class
A plastic switch cover does not soften when heated in a flame test, but chars instead. Is it thermoplastic or thermosetting? Because it does not soften, it has a cross-linked network. It is thermosetting, and Bakelite is a likely example.
Worked example 4: choose a material
Which polymer would you pick for a clear, shatter-resistant window? PMMA, because it is transparent, light and a thermoplastic that can be shaped by heating. Which would you pick for a kitchen worktop laminate that must withstand hot plates? Melamine resin, because as a thermosetting resin it is hard and does not melt.
Key takeaways
- PMMA, PVA and polyacrylonitrile are addition polymers.
- Bakelite, melamine and urea resins are thermosetting resins from methanal.
- The repeat unit of an addition polymer has the same mass as its monomer.
Check your understanding
-
1. Which polymer is also known as acrylic or Perspex?
- PVC
- PMMA
- Bakelite
- Polythene
Show answer
Answer: B. Polymethyl methacrylate (PMMA) is the transparent acrylic plastic.
-
2. What is the mass of the repeat unit of PMMA, C₅H₈O₂ (C = 12, H = 1, O = 16)?
- 86
- 110
- 114
- 100
Show answer
Answer: D. 60 + 8 + 32 = 100.
-
3. Which of these is a thermosetting plastic?
- PMMA
- Polythene
- Polyvinyl acetate
- Bakelite
Show answer
Answer: D. Bakelite forms a cross-linked network that cannot be softened again.
-
4. What is the molar mass of PVA with DP = 1000 (repeat unit C₄H₆O₂ = 86)?
- 86 000 g/mol
- 8600 g/mol
- 43 000 g/mol
- 860 000 g/mol
Show answer
Answer: A. 1000 × 86 = 86 000 g/mol.
-
5. Which monomer is used to make acrylic fibres?
- Vinyl acetate
- Phenol
- Acrylonitrile
- Urea
Show answer
Answer: C. Polyacrylonitrile is made from acrylonitrile, CH₂=CH–CN.
Sign in to keep track of the lessons you finish.