- Practice
- About 14 min
- 5 practice questions
Expressing concentration: the terms and their traps
Calculate mass percent, ppm, mole fraction, molarity and molality correctly and avoid the solution-versus-solvent trap.
If something looks wrong, please tell us.
Every question in the solutions chapter starts with a concentration. Colligative properties use molality, osmotic pressure uses molarity, Raoult's law uses mole fraction, and water-quality questions use parts per million. Choosing the wrong term, or dividing by the wrong mass or volume, ruins the rest of the answer. This lesson sets out each term with one exam-style example and the trap that goes with it.
The terms side by side
| Term | Formula | Unit |
|---|---|---|
| Mass percent (w/w) | mass of solute ÷ mass of solution × 100 | % |
| Parts per million | mass of solute ÷ mass of solution × 10^6 | ppm |
| Mole fraction of A | moles of A ÷ total moles | none |
| Molarity | moles of solute ÷ litres of solution | mol/L (M) |
| Molality | moles of solute ÷ kilograms of solvent | mol/kg (m) |
Look at the denominators. Mass percent, ppm and molarity divide by the solution; molality divides by the solvent only. Mole fraction divides by the total moles of every component, so the mole fractions in a solution always add up to 1.
Solution = solute + solvent. Molality alone uses the solvent; molarity, mass percent and ppm use the solution.
Worked example 1: mass percent
10 g of NaCl is dissolved in 90 g of water. Mass of solution = 10 + 90 = 100 g, so mass percent = 10 ÷ 100 × 100 = 10%. Trap: dividing by 90 g, the water only, gives 11.1%, which is a common wrong option.
Worked example 2: parts per million
A 2 kg sample of water contains 0.5 g of a dissolved salt. ppm = 0.5 ÷ 2000 × 10^6 = 250 ppm. Parts per million is used for very small amounts, such as dissolved gases or impurities in water, because the percentage would be an awkwardly tiny number (here 0.025%).
Worked example 3: molality and mole fraction together
18 g of glucose (M = 180) is dissolved in 500 g of water. Moles of glucose = 0.1. Molality = 0.1 ÷ 0.500 kg = 0.2 m. Moles of water = 500 ÷ 18 = 27.78. Mole fraction of glucose = 0.1 ÷ (0.1 + 27.78) = 0.00359, and mole fraction of water = 1 − 0.00359 = 0.99641.
Which term to use when
- Molality, mass percent and mole fraction do not change with temperature, because they use only masses.
- Molarity changes with temperature, because the volume of a solution expands on heating.
- Colligative property formulas for boiling and freezing points use molality; osmotic pressure uses molarity.
- Raoult's law uses mole fractions.
Worked example 4: molarity and molality of the same solution
4 g of NaOH is dissolved in 250 g of water. Moles = 0.1. Molality = 0.1 ÷ 0.250 = 0.4 m. The molarity cannot be found without the volume of the solution (which needs its density); assuming the volume is 250 mL is an approximation, valid only for dilute solutions.
Worked example 5: solution mass given, solvent mass needed
20 g of NaOH is dissolved in water to make 500 g of solution. Mass percent = 20 ÷ 500 × 100 = 4%. For molality, first find the solvent: 500 − 20 = 480 g of water. Moles of NaOH = 20 ÷ 40 = 0.5, so molality = 0.5 ÷ 0.480 = 1.04 m. Dividing by the 0.500 kg of solution gives 1.0 m, a tempting wrong option. Whenever a question states the mass of the solution, subtract the solute before calculating molality. Doing the subtraction as a separate written step takes only a few seconds and removes the most common error in this chapter.
Key takeaways. Check the denominator of each term: solution for mass percent, ppm and molarity; solvent for molality; total moles for mole fraction. Only molarity depends on temperature. Mole fractions add to 1, which gives a quick check.
Check your understanding
-
1. 25 g of sugar is dissolved in 100 g of water. What is the mass percent of sugar?
- 25%
- 20%
- 80%
- 12.5%
Show answer
Answer: B. Mass of solution = 125 g. Mass percent = 25 ÷ 125 × 100 = 20%.
-
2. 0.01 g of a substance is present in 500 g of solution. What is its concentration in ppm?
- 20 ppm
- 2 ppm
- 200 ppm
- 50 ppm
Show answer
Answer: A. ppm = 0.01 ÷ 500 × 10^6 = 20 ppm.
-
3. 4 g of NaOH (M = 40) is dissolved in 250 g of water. What is the molality?
- 0.1 m
- 0.16 m
- 1.6 m
- 0.4 m
Show answer
Answer: D. Moles = 0.1. Molality = 0.1 ÷ 0.25 kg = 0.4 m.
-
4. Which concentration term changes when the temperature of a solution changes?
- Molality
- Mole fraction
- Molarity
- Mass percent
Show answer
Answer: C. Molarity uses the volume of solution, which changes with temperature. The others are based on masses only.
-
5. 18 g of glucose (M = 180) is dissolved in 90 g of water. What is the mole fraction of water?
- 0.020
- 0.980
- 0.833
- 0.952
Show answer
Answer: B. Glucose = 0.1 mol, water = 90 ÷ 18 = 5 mol. x(water) = 5 ÷ 5.1 = 0.980.
Sign in to keep track of the lessons you finish.