- Practice
- About 15 min
- 5 practice questions
Raoult's law, ideal solutions and deviations
Use Raoult's law to find the vapour pressure and vapour composition of a liquid mixture, and recognise positive and negative deviations.
If something looks wrong, please tell us.
When two volatile liquids are mixed, each contributes to the vapour above the mixture. Raoult's law tells us how much each contributes, and comparing real mixtures with the law tells us about the forces between the molecules. Exam questions ask for total vapour pressure, the composition of the vapour, and the type of deviation shown by named mixtures.
Raoult's law for two volatile liquids
For a solution of two volatile liquids A and B, the partial vapour pressure of each component equals its mole fraction in the liquid times the vapour pressure of the pure liquid. The total vapour pressure is the sum of the two partial pressures (Dalton's law).
pA = xA pA°, pB = xB pB°, P(total) = xA pA° + xB pB°. In the vapour, yA = pA ÷ P(total).
Worked example 1: total pressure and vapour composition
Liquid A has p° = 400 mm Hg and liquid B has p° = 600 mm Hg at a certain temperature. A solution has xA = 0.4, so xB = 0.6. pA = 0.4 × 400 = 160 mm; pB = 0.6 × 600 = 360 mm; P = 520 mm. In the vapour, yA = 160 ÷ 520 = 0.308 and yB = 0.692. Notice that the vapour is richer in B (0.692 against 0.6 in the liquid). The vapour is always richer in the more volatile component, which is the basis of fractional distillation.
Worked example 2: liquid composition from total pressure
For A (p° = 300 mm) and B (p° = 800 mm), a mixture has total vapour pressure 450 mm. Let xA = x: 300x + 800(1 − x) = 450, so 800 − 500x = 450 and x = 0.7. The liquid is 70% A by moles. Speed check: the total pressure must lie between the two pure vapour pressures, and it is nearer to A's, so A must be the major component.
Ideal and non-ideal solutions
An ideal solution obeys Raoult's law at all compositions. This happens when the A–B attractions are about the same as the A–A and B–B attractions. Then mixing releases or absorbs no heat (ΔH(mix) = 0) and the volumes simply add (ΔV(mix) = 0). Mixtures of very similar liquids, such as n-hexane with n-heptane, or benzene with toluene, are nearly ideal.
| Feature | Positive deviation | Negative deviation |
|---|---|---|
| A–B attraction compared with A–A, B–B | Weaker | Stronger |
| Vapour pressure | Higher than Raoult's law predicts | Lower than Raoult's law predicts |
| ΔH(mix) | Positive (heat absorbed) | Negative (heat released) |
| ΔV(mix) | Positive (expansion) | Negative (contraction) |
| Azeotrope formed (large deviation) | Minimum-boiling | Maximum-boiling |
| Textbook example | Ethanol + acetone; carbon disulphide + acetone | Chloroform + acetone; phenol + aniline |
In ethanol, molecules are held by hydrogen bonds. Adding acetone breaks some of them, so molecules escape more easily: positive deviation. In chloroform + acetone, a new hydrogen bond forms between the chloroform hydrogen and the acetone oxygen, holding the molecules more tightly: negative deviation.
Azeotropes
An azeotrope is a mixture that boils at constant temperature with vapour of the same composition as the liquid, so it cannot be separated by simple fractional distillation. Large positive deviations give minimum-boiling azeotropes; large negative deviations give maximum-boiling azeotropes.
Key takeaways. Each component's partial pressure is its mole fraction times its pure vapour pressure, and the vapour is richer in the more volatile liquid. Ideal solutions have zero heat and volume change on mixing. Weaker A–B attraction means positive deviation and a minimum-boiling azeotrope; stronger means negative deviation and a maximum-boiling azeotrope.
Check your understanding
-
1. Liquids A (p° = 200 mm Hg) and B (p° = 500 mm Hg) form an ideal solution with xA = 0.6. What is the total vapour pressure?
- 350 mm Hg
- 320 mm Hg
- 380 mm Hg
- 290 mm Hg
Show answer
Answer: B. P = 0.6 × 200 + 0.4 × 500 = 120 + 200 = 320 mm Hg.
-
2. For the solution in the previous question, what is the mole fraction of B in the vapour?
- 0.4
- 0.375
- 0.625
- 0.5
Show answer
Answer: C. yB = pB ÷ P = 200 ÷ 320 = 0.625. The vapour is richer in B, the more volatile liquid.
-
3. For an ideal solution, which pair of statements is correct?
- ΔH(mix) = 0 and ΔV(mix) = 0
- ΔH(mix) < 0 and ΔV(mix) < 0
- ΔH(mix) > 0 and ΔV(mix) > 0
- ΔH(mix) = 0 but ΔV(mix) > 0
Show answer
Answer: A. An ideal solution forms with no heat change and no volume change, because A–B attractions equal A–A and B–B attractions.
-
4. Which mixture shows a negative deviation from Raoult's law?
- n-hexane + n-heptane
- Ethanol + acetone
- Benzene + toluene
- Chloroform + acetone
Show answer
Answer: D. Chloroform and acetone form a hydrogen bond with each other, so A–B attractions are stronger and the vapour pressure is lower than predicted.
-
5. A solution showing a large positive deviation from Raoult's law forms which kind of azeotrope?
- A maximum-boiling azeotrope
- A minimum-boiling azeotrope
- No azeotrope is possible
- An ideal solution
Show answer
Answer: B. Positive deviation raises the vapour pressure, so the azeotrope boils at a lower temperature than either component: minimum-boiling.
Sign in to keep track of the lessons you finish.