- Practice
- About 15 min
- 5 practice questions
Finding molar mass: one worked problem for each colligative property
Calculate the molar mass of an unknown solute from lowering of vapour pressure, boiling-point elevation, freezing-point depression and osmotic pressure, and spot when an electrolyte distorts the answer.
If something looks wrong, please tell us.
Every colligative property can give a molar mass, and every one has its own formula, units and trap. In exams, the question type tells you which property to use. This lesson sets out one worked problem for each of the four properties and then shows how an electrolyte spoils the result. The numbers are illustrative practice values, chosen so the arithmetic is clean.
The method in four lines
- Find the property's change from the data (use differences, not raw readings).
- Use the property to get the moles of solute particles.
- Divide the mass of solute by those moles.
- If the solute is an electrolyte, correct for the van't Hoff factor.
Type 1: lowering of vapour pressure
6 g of a non-volatile solute is dissolved in 90 g of water. The vapour pressure falls from 51 mm Hg to 50 mm Hg. A neat exact form is (p° − p) ÷ p = n_B ÷ n_A. Here (51 − 50) ÷ 50 = 0.02 and n_A = 90 ÷ 18 = 5.0 mol, so n_B = 0.02 × 5.0 = 0.10 mol. Molar mass = 6 ÷ 0.10 = 60 g/mol. Note that p, the solution's pressure, is in the denominator of this form; with p° in the denominator you must use the mole fraction x_B = n_B ÷ (n_A + n_B) instead.
Type 2: elevation of boiling point
9 g of a non-electrolyte in 100 g of water raises the boiling point by 0.26 K (Kb = 0.52 K kg/mol). Molality = 0.26 ÷ 0.52 = 0.50 mol/kg. Moles in 0.100 kg of water = 0.50 × 0.100 = 0.050 mol. Molar mass = 9 ÷ 0.050 = 180 g/mol, glucose. The trap is the unit of solvent mass: 100 g is 0.100 kg.
Type 3: depression of freezing point in another solvent
1.0 g of a solute in 50 g of benzene lowers the freezing point by 0.512 K. The question supplies Kf for benzene as 5.12 K kg/mol. Molality = 0.512 ÷ 5.12 = 0.10 mol/kg. Moles = 0.10 × 0.050 = 0.0050 mol. Molar mass = 1.0 ÷ 0.0050 = 200 g/mol. The same method works for any solvent; always use the constant for the solvent in the question, not the constant for water.
Type 4: osmotic pressure
0.5 g of a protein is dissolved in water to make 100 mL of solution. At 300 K the osmotic pressure is 2.463 × 10^−3 atm. C = π ÷ RT = 2.463 × 10^−3 ÷ (0.0821 × 300) = 1.0 × 10^−4 mol/L. Moles in 0.100 L = 1.0 × 10^−5 mol. Molar mass = 0.5 ÷ 1.0 × 10^−5 = 50,000 g/mol. Osmotic pressure is used for proteins because even this tiny concentration gives a measurable pressure, whereas the freezing-point change would be about 2 × 10^−4 K.
The electrolyte trap
Suppose 0.585 g of NaCl is dissolved in 100 g of water and the freezing-point depression measured is 0.372 K. A student who forgets that NaCl splits into two ions computes the molality as 0.372 ÷ 1.86 = 0.200, moles as 0.0200, and molar mass as 0.585 ÷ 0.0200 = 29.25 g/mol. That is half of the true 58.5 g/mol. The ratio true ÷ calculated = 58.5 ÷ 29.25 = 2 is the van't Hoff factor. Whenever a calculated molar mass comes out as a simple fraction of a plausible value, suspect dissociation.
Molar mass = mass of solute ÷ moles of particles. Get the moles from the property: m = ΔT ÷ K for boiling and freezing; C = π ÷ RT for osmotic pressure; (p° − p) ÷ p = n_B ÷ n_A for vapour pressure.
Key takeaways
- Each property gives moles of particles; molar mass is mass divided by moles.
- Use the constant for the solvent given, and convert grams of solvent to kilograms.
- Osmotic pressure suits large molecules; it needs kelvin and molarity.
- A calculated molar mass that is too small by a simple factor signals an electrolyte.
Check your understanding
-
1. 6 g of a non-volatile solute in 90 g of water lowers the vapour pressure of water from 51 mm Hg to 50 mm Hg. Its molar mass is:
- 30 g/mol
- 90 g/mol
- 120 g/mol
- 60 g/mol
Show answer
Answer: D. (p° − p) ÷ p = n_B ÷ n_A: 1/50 = n_B/5, so n_B = 0.10 mol and M = 6 ÷ 0.10 = 60 g/mol.
-
2. 9 g of a non-electrolyte in 100 g of water raises the boiling point by 0.26 K (Kb = 0.52 K kg/mol). The molar mass is:
- 180 g/mol
- 90 g/mol
- 18 g/mol
- 360 g/mol
Show answer
Answer: A. Molality = 0.50; moles = 0.50 × 0.100 = 0.050 mol; M = 9 ÷ 0.050 = 180 g/mol.
-
3. 1.0 g of a solute in 50 g of benzene lowers the freezing point by 0.512 K (Kf of benzene = 5.12 K kg/mol). The molar mass is:
- 100 g/mol
- 400 g/mol
- 50 g/mol
- 200 g/mol
Show answer
Answer: D. m = 0.512 ÷ 5.12 = 0.10; n = 0.10 × 0.050 = 0.0050 mol; M = 1.0 ÷ 0.0050 = 200 g/mol.
-
4. 0.5 g of a protein in 100 mL of solution gives π = 2.463 × 10^−3 atm at 300 K. The molar mass is about:
- 5,000 g/mol
- 500,000 g/mol
- 50,000 g/mol
- 50 g/mol
Show answer
Answer: C. C = 2.463 × 10^−3 ÷ 24.63 = 1.0 × 10^−4 M; moles in 0.100 L = 1.0 × 10^−5 mol; M = 0.5 ÷ 1.0 × 10^−5 = 50,000 g/mol.
-
5. 0.585 g of NaCl in 100 g of water gives a freezing-point depression of 0.372 K. If the dissociation is ignored, the molar mass calculated is 29.25 g/mol. The van't Hoff factor is:
- 0.5
- 1
- 2
- 4
Show answer
Answer: C. True molar mass ÷ apparent molar mass = 58.5 ÷ 29.25 = 2, so each formula unit gives two particles.
Sign in to keep track of the lessons you finish.