• Foundation
  • About 15 min
  • 5 practice questions

Solar energy: photovoltaic panels and solar thermal

Explain how solar panels turn light into electricity, how solar thermal systems use the Sun's heat, and work out a panel's output from its area and efficiency.

If something looks wrong, please tell us.

The Sun is the largest energy source we have. In a single hour, far more sunlight reaches the Earth than people use in a much longer period. Turning that sunlight into useful energy can be done in two quite different ways: by making electricity directly from light, or by collecting the Sun's heat. This lesson explains both and shows how to estimate how much a solar panel produces.

Solar photovoltaic (PV): light to electricity

A solar cell is a thin slice of a semiconductor, usually silicon, treated so that it has two layers with different electrical properties. Where the layers meet there is a junction with a built-in electric field. When light falls on the cell, its energy knocks electrons loose. The electric field pushes these electrons one way, so they flow through an outside wire as an electric current. This is the photovoltaic effect: photo means light, voltaic means electricity.

Many cells are joined to make a module (panel), and many panels make an array. Solar cells produce direct current (DC). Homes and the grid use alternating current (AC), so an inverter converts the DC to AC. A cell has no moving parts, makes no noise and burns no fuel, which is why rooftop panels are so common.

Efficiency of a panel

Not all the sunlight that hits a panel becomes electricity. Efficiency is the fraction that does. On a clear day around noon, about 1,000 watts of sunlight fall on each square metre of ground facing the Sun; panels are rated under this standard condition. If a panel turns 20% of that into electricity, each square metre gives about 200 W.

Electrical power out = Sunlight per square metre × Area × Efficiency.

Worked example 1: output of one panel

A panel has an area of 1.6 m² and an efficiency of 20%. Sunlight is 1,000 W/m². Power = 1,000 × 1.6 × 0.20 = 320 W. If the panel gets the equivalent of 5 hours of such full sunshine in a day, energy = 320 W × 5 h = 1,600 Wh = 1.6 kWh.

Worked example 2: a small rooftop

A rooftop has 10 such panels. Total power = 10 × 320 W = 3,200 W = 3.2 kW. With 5 full-sun hours, daily energy = 3.2 kW × 5 h = 16 kWh. In real life a little is lost in wiring, heat and the inverter, so actual output is somewhat lower, but the method stays the same: power from area and efficiency, then energy from power and hours.

Solar thermal: using the Sun's heat

Solar thermal systems do not make electricity directly. A solar water heater has a dark collector plate or dark tubes that absorb sunlight and warm water flowing through them; the hot water is stored in an insulated tank. Dark surfaces absorb more light, and glass covers trap heat, much like a closed car parked in the Sun.

Concentrated solar power (CSP) uses mirrors to focus sunlight on to a small area, reaching temperatures high enough to boil a fluid and drive a steam turbine, just as in a coal plant but without fuel. Curved trough-shaped mirrors, a tall central tower surrounded by mirrors, or a dish can be used. Because heat can be stored in tanks of hot molten salt, a CSP plant can keep generating for some time after sunset.

PV and thermal compared
FeatureSolar PVSolar thermal
What it makesElectricity directlyHeat (hot water, steam)
Key partSemiconductor cellCollector or mirrors
Moving partsNone in the cellPumps; turbine in CSP
StorageBatteriesHot water or molten salt tanks

Key takeaways

Solar PV uses the photovoltaic effect in a semiconductor to make DC electricity, which an inverter turns into AC. Output equals sunlight per square metre times area times efficiency, and energy equals that power times the hours of full sun. Solar thermal collects heat instead: water heaters for homes, and concentrated solar power, which uses mirrors to raise steam and can store heat for use after dark.

Check your understanding

  1. 1. What does an inverter do in a solar PV system?

    1. Converts direct current into alternating current
    2. Converts heat into light
    3. Stores excess electricity for night use
    4. Turns alternating current into sunlight
    Show answer

    Answer: A. Solar cells produce direct current. Homes and the grid use alternating current, so an inverter converts DC to AC.

  2. 2. Which material is most commonly used to make solar cells?

    1. Copper
    2. Silicon
    3. Lead
    4. Aluminium
    Show answer

    Answer: B. Most solar cells are made from silicon, a semiconductor. The photovoltaic effect needs a semiconductor junction.

  3. 3. A 2 m² panel with 15% efficiency receives 1,000 W/m² of sunlight. What is its power output?

    1. 150 W
    2. 300 W
    3. 2,000 W
    4. 3,000 W
    Show answer

    Answer: B. Power = 1,000 × 2 × 0.15 = 300 W.

  4. 4. How does a concentrated solar power plant produce electricity?

    1. Mirrors focus sunlight to heat a fluid that drives a steam turbine
    2. Silicon cells release electrons when light hits them
    3. Wind created by heated air turns blades
    4. Sunlight splits water into hydrogen in the mirrors
    Show answer

    Answer: A. CSP uses mirrors to concentrate sunlight, producing heat high enough to raise steam, which turns a turbine and generator.

  5. 5. A 3 kW rooftop system gets 4 hours of full sunshine. Ignoring losses, how much energy does it produce?

    1. 12 kWh
    2. 7 kWh
    3. 0.75 kWh
    4. 1.33 kWh
    Show answer

    Answer: A. Energy = power × time = 3 kW × 4 h = 12 kWh.

Privacy · Terms · Refunds · Delivery