- Foundation
- About 15 min
- 5 practice questions
Wind energy: how turbines work and the cube rule
Describe how a wind turbine makes electricity, use the rule that wind power grows with the cube of wind speed, and explain the Betz limit.
If something looks wrong, please tell us.
Wind is air moving from areas of high pressure to areas of low pressure. Those pressure differences exist because the Sun heats land, sea and air unevenly. People have used wind for centuries to sail boats and turn windmills that ground grain or pumped water. A modern wind turbine does the same job of catching moving air, but turns its energy into electricity. This lesson explains how, and introduces the single most useful rule about wind power.
Parts of a wind turbine
A typical large turbine has three long blades fixed to a hub, which together form the rotor. The rotor is mounted on top of a tall tower. Behind the rotor sits the nacelle, a housing that holds a gearbox and a generator. Wind pushes on the shaped blades and makes the rotor spin; the spinning shaft turns the generator, which converts the movement into electricity. The nacelle can turn to face the wind. Most large machines spin about a horizontal axis; smaller designs that spin about a vertical axis also exist.
Why height and open space help
Wind near the ground is slowed by friction with trees, buildings and hills. Higher up, the air moves faster and more smoothly. That is why turbines are placed on tall towers, and why good sites include open plains, hilltops, coasts and the sea itself. Turbines placed at sea are called offshore; those on land are onshore. Offshore winds are usually stronger and steadier, but building at sea is harder.
The cube rule
The power in the wind passing through the area swept by the blades depends on three things: the density of the air, the swept area, and the wind speed. Speed matters most, because power grows with the cube of the speed.
Power in the wind P = ½ × ρ × A × v³, where ρ is air density, A is the swept area and v is the wind speed. Double the speed and the power becomes 2³ = 8 times.
This explains why a site with only slightly stronger winds can be far better. It also explains the role of blade length. The swept area is a circle, A = πr², where r is the blade length. Double the blade length and the area, and so the power, becomes 2² = 4 times.
Worked example 1: what happens when the wind speeds up
At a site the wind speed rises from 5 m/s to 10 m/s. The speed has doubled, so the power becomes 2³ = 8 times as much. If the wind speed instead rose from 4 m/s to 12 m/s, the speed would be 3 times as large and the power 3³ = 27 times. Always find the speed ratio first, then cube it.
Worked example 2: power in the wind
A turbine sweeps an area of 100 m². Air density is 1.2 kg/m³ and the wind speed is 10 m/s. P = ½ × 1.2 × 100 × 10³ = 0.6 × 100 × 1,000 = 60,000 W = 60 kW. This is the power carried by the wind through the rotor, not what the turbine actually delivers, as the next section explains.
The Betz limit
A turbine cannot capture all the wind's power. If it did, the air behind the blades would stop completely and no more air could flow through. The physicist Albert Betz showed that the most any turbine can capture is 16/27 of the power in the wind, about 59.3%. This is a theoretical maximum, called the Betz limit; real turbines capture less because of friction and other losses. In worked example 2, the most the turbine could ever capture is about 0.593 × 60 kW ≈ 35.6 kW.
Strengths and limits of wind power
Wind turbines burn no fuel and release no smoke while working, and the land between them can still be farmed. Their weaknesses are that the wind is variable, so output rises and falls, and that a turbine stops in very strong winds to protect itself. Turbines are also tall, can be noisy close by, and need careful siting away from bird flight paths.
Key takeaways
A wind turbine turns moving air into rotation and then into electricity in its generator. Power in the wind is ½ρAv³, so it grows with the cube of wind speed and with the square of blade length. No turbine can capture more than 16/27, about 59.3%, of the wind's power: the Betz limit.
Check your understanding
-
1. If the wind speed at a turbine is doubled, the power in the wind becomes how many times as large?
- 2 times
- 8 times
- 4 times
- 16 times
Show answer
Answer: B. Power is proportional to v³, so doubling the speed gives 2³ = 8 times the power.
-
2. What is the Betz limit?
- The highest wind speed a turbine can survive
- The minimum wind speed needed to start a turbine
- The maximum fraction of the wind's power any turbine can capture, about 59.3%
- The largest blade length that can be built
Show answer
Answer: C. Betz showed that no turbine can capture more than 16/27 ≈ 59.3% of the power in the wind passing through it. It is a theoretical maximum.
-
3. The blades of a turbine are made twice as long, with wind speed unchanged. The power in the wind through the rotor becomes:
- 4 times as large
- 2 times as large
- 8 times as large
- half as large
Show answer
Answer: A. Swept area A = πr². Doubling r makes A 2² = 4 times, and power is proportional to A.
-
4. Why are wind turbines mounted on tall towers?
- Air is denser higher up
- Birds avoid tall structures
- Wind is faster and smoother higher above the ground
- Towers store energy for calm days
Show answer
Answer: C. Friction with the ground, trees and buildings slows the wind near the surface. Higher up the wind is stronger and steadier.
-
5. Which part of a wind turbine converts the spinning motion into electricity?
- The tower
- The blades
- The anemometer
- The generator
Show answer
Answer: D. The blades catch the wind and turn the shaft; the generator in the nacelle converts that rotation into electricity.
Sign in to keep track of the lessons you finish.