• Foundation
  • About 13 min
  • 5 practice questions

Using energy wisely: efficiency, payback and savings

Learn what efficiency means, why saving energy is often the cheapest 'source', and how to calculate energy saved and simple payback for devices such as LED lamps and a rooftop solar system.

If something looks wrong, please tell us.

The cheapest and cleanest unit of energy is the one that is never used. Using devices that waste less is called energy efficiency. It cuts bills, reduces pollution and lowers the number of power plants needed, whether they burn coal or use renewable sources. Because renewable systems cost money to install, it is useful to compare costs with savings using the idea of payback. This lesson covers efficiency, a saving calculation and payback. All prices are illustrative.

Efficiency

Efficiency is the fraction of the energy put into a device that comes out as the useful form. Efficiency = useful energy out ÷ total energy in, often given as a percentage. The rest is usually wasted as heat. An old filament bulb turns most of the electricity into heat and only a small part into light; an LED lamp gives the same light for much less power. A coal power plant turns only about a third of the fuel's energy into electricity, which is one reason why saving electricity also saves fuel.

DeviceUseful outputWasted as
Filament bulbLightMostly heat
LED lampLightLittle heat
Electric motorMotionSome heat and noise
Petrol engineMotionMostly heat
Solar panelElectricityHeat and reflection

Ways to save energy

  • Switch off lights and fans when not needed, and unplug chargers that are not in use.
  • Choose efficient appliances and lamps; look at the star rating where available.
  • Use sunlight and natural ventilation in daytime.
  • Insulate roofs and walls to keep buildings cooler or warmer.
  • Maintain machines, so that they run well.

Worked example 1: energy saved by an LED

Example 1. A filament bulb of 60 W and an LED of 9 W give about the same light (illustrative). Each is on for 5 hours a day. How much energy does the LED save in a year of 365 days, and what is the saving in rupees at ₹8 per kWh (an illustrative price)? Working: power saved = 60 − 9 = 51 W = 0.051 kW. Energy saved a day = 0.051 × 5 = 0.255 kWh. In a year = 0.255 × 365 = 93.1 kWh. Money saved = 93.1 × 8 = ₹745 (to the nearest rupee, 744.6).

Simple payback

Simple payback time = extra cost ÷ saving per year. It tells you how long a saving takes to repay the cost. It does not allow for the changing value of money, but it is quick and useful for a first comparison.

Worked example 2: payback of the LED

Example 2. The LED costs ₹100. Using the saving from Example 1 (₹744.6 a year), find the payback. Working: payback = 100 ÷ 744.6 = 0.134 years, which is 0.134 × 365 = 49 days. After that, the LED saves money. It also lasts much longer than a filament bulb, which adds to the benefit.

Worked example 3: payback of a rooftop system

Example 3. A rooftop solar system of 3 kW costs ₹1,80,000 (illustrative) and gives 4 kWh per day for each kW of capacity. Electricity is valued at ₹7 per kWh. Find the payback. Working: energy per day = 3 × 4 = 12 kWh. Per year = 12 × 365 = 4,380 kWh. Value per year = 4,380 × 7 = ₹30,660. Payback = 1,80,000 ÷ 30,660 = 5.9 years. A real calculation would also include maintenance, the fall in output over time and the real price of electricity, so this figure is only a guide.

Efficiency = useful output ÷ input. Payback (years) = cost ÷ annual saving. Energy saved = power saved × hours.

Key takeaways: efficiency is useful output divided by input; saving energy is often cheaper than producing it; energy saved is the difference in power times hours; and payback is cost divided by yearly saving. Any prices in an exam are given to you, never assumed.

Check your understanding

  1. 1. Efficiency is defined as:

    1. Useful energy out divided by energy in
    2. Energy in divided by useful energy out
    3. Total waste multiplied by time
    4. Power multiplied by time
    Show answer

    Answer: A. Efficiency is the useful output as a fraction of the total input.

  2. 2. A 60 W bulb is replaced by a 10 W LED and used for 5 hours a day for 30 days. How much energy is saved?

    1. 1.5 kWh
    2. 30 kWh
    3. 75 kWh
    4. 7.5 kWh
    Show answer

    Answer: D. Power saved = 50 W; energy = 50 × 5 × 30 = 7,500 Wh = 7.5 kWh.

  3. 3. An appliance costing ₹500 more saves ₹250 a year. What is the simple payback?

    1. 0.5 years
    2. 250 years
    3. 2 years
    4. 5 years
    Show answer

    Answer: C. Payback = 500 ÷ 250 = 2 years.

  4. 4. A device is 30% efficient. For 1,000 J of input, how much useful energy comes out?

    1. 700 J
    2. 300 J
    3. 30 J
    4. 3,000 J
    Show answer

    Answer: B. Useful energy = 1,000 × 0.30 = 300 J. The remaining 700 J is wasted.

  5. 5. Which action saves energy?

    1. Switching off lights in an empty room
    2. Leaving chargers plugged in all day
    3. Running fans in a room with nobody
    4. Using bulbs of a much higher power
    Show answer

    Answer: A. Switching off unneeded lights saves electricity. The other actions waste it.

Privacy · Terms · Refunds · Delivery