• Practice
  • About 16 min
  • 5 practice questions

Resistance, resistivity, conductors and insulators

Explain what causes resistance, use R = ρL/A to relate resistance to length, thickness and material, and tell conductors, insulators, superconductors and non-ohmic conductors apart.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why a conductor offers resistance to current.
  • State how resistance depends on length and area of cross-section.
  • Use R = ρL/A and give the unit of resistivity.
  • Compare conductors and insulators and explain why materials are chosen for particular jobs.

The thin coil in an electric heater glows red-hot, while the thick copper cable bringing current to it stays cool. Both carry the same current. The difference lies in their resistance, which depends on the material, the length and the thickness of the wire.

Why a conductor has resistance

When a potential difference is applied, free electrons drift through the conductor. On the way they keep striking the atoms and ions in their path. These collisions hinder the flow of electrons and oppose the current. This opposition to the flow of current is the resistance of the conductor. The collisions also produce heat, which is why wires warm up when current flows.

What resistance depends on

  • Length (L): a longer wire means more collisions on the way, so R ∝ L. Double the length, double the resistance.
  • Area of cross-section (A): a thicker wire gives more paths side by side for the electrons, so R ∝ 1/A. Double the area, half the resistance.
  • Material: some materials resist far more than others at the same size.
  • Temperature: for metals, resistance usually rises as temperature rises, which is why Ohm's law needs the temperature to stay constant.

Combining the first two: R ∝ L/A, so R = ρL/A. The constant ρ (rho) is the resistivity of the material. It is a property of the material itself (at a given temperature), not of the size or shape of the wire. Rearranging, ρ = RA/L, so its unit is Ω × m² ÷ m = ohm metre (Ω m).

Nichrome's resistivity is about 65 times that of copper
MaterialResistivity (Ω m), approximateTypical use
Copper1.7 × 10⁻⁸Connecting wires and cables
Nichrome (an alloy)1.1 × 10⁻⁶Heating coils in irons and heaters
Glass, rubber, dry woodExtremely highInsulation, handles, supports

Worked example 1: resistance of a heater wire

Question: A nichrome wire is 2 m long and has an area of cross-section of 0.5 mm². Find its resistance. (ρ = 1.1 × 10⁻⁶ Ω m)

Working: Convert the area: 1 mm² = 10⁻⁶ m², so A = 0.5 × 10⁻⁶ m². R = ρL/A = (1.1 × 10⁻⁶ × 2) ÷ (0.5 × 10⁻⁶) = 2.2 ÷ 0.5 = 4.4 Ω. The 10⁻⁶ factors cancel neatly here.

Worked example 2: identifying the metal

Question: A wire 4 m long with an area of cross-section of 2 × 10⁻⁷ m² has a resistance of 0.34 Ω. Find the resistivity and suggest the metal.

Working: ρ = RA/L = (0.34 × 2 × 10⁻⁷) ÷ 4 = 0.68 × 10⁻⁷ ÷ 4 = 0.17 × 10⁻⁷ = 1.7 × 10⁻⁸ Ω m. This matches copper.

Worked example 3: changing the shape

Question: A wire has a resistance of 12 Ω. What is the resistance of (a) a piece half as long, (b) a wire of the same length and material but twice the area of cross-section?

Working: (a) R ∝ L, so half the length gives 12 ÷ 2 = 6 Ω. (b) R ∝ 1/A, so twice the area gives 12 ÷ 2 = 6 Ω.

Conductors and insulators

Conductors have very low resistance and let current flow easily: metals such as copper, aluminium and silver, and also graphite. Insulators (bad conductors) have extremely high resistance and practically no current flows through them: rubber, plastic, glass, dry wood, porcelain. Metals conduct well because they have many free electrons; insulators have almost none. Our body can conduct electricity because it contains water with dissolved salts, which is why touching a live wire is dangerous, especially with wet hands.

Conductors and insulators

  • Conductors
    • Very low resistance
    • Many free electrons
    • Copper, aluminium, silver, graphite
    • Used for wires and terminals
  • Insulators
    • Extremely high resistance
    • Almost no free electrons
    • Rubber, plastic, glass, porcelain
    • Used for coverings, handles and supports

Two special cases: some conductors lose nearly all their resistance when cooled to a temperature close to 0 kelvin; they are called superconductors. And some conductors do not obey Ohm's law at all; they are non-ohmic conductors.

R = ρL/A: resistance increases with length, decreases with area of cross-section, and depends on the material through its resistivity ρ (unit Ω m).

Key takeaways: resistance comes from electrons colliding with atoms and ions. A long, thin wire of a high-resistivity alloy like nichrome makes a good heating element; short, thick copper wires make good connectors. Insulators protect us by keeping current inside its intended path.

Check your understanding

  1. 1. What causes the resistance of a metal wire?

    1. The wire's insulation coating
    2. Free electrons colliding with atoms and ions as they drift
    3. The positive terminal of the cell pulling electrons back
    4. Air around the wire
    Show answer

    Answer: B. As free electrons drift through the metal, they keep striking the atoms and ions in their path. These collisions oppose their flow, and this opposition is the resistance.

  2. 2. What is the SI unit of resistivity?

    1. ohm
    2. ohm per metre
    3. ohm metre
    4. volt per metre
    Show answer

    Answer: C. From ρ = RA/L, the unit is ohm × square metre ÷ metre = ohm metre (Ω m).

  3. 3. A wire has a resistance of 8 Ω. Another wire of the same material and thickness is twice as long. What is its resistance?

    1. 4 Ω
    2. 16 Ω
    3. 8 Ω
    4. 32 Ω
    Show answer

    Answer: B. Resistance is directly proportional to length when the material and area stay the same. Twice the length gives 2 × 8 = 16 Ω.

  4. 4. A copper wire 50 m long has an area of cross-section of 1 × 10⁻⁶ m². The resistivity of copper is 1.7 × 10⁻⁸ Ω m. What is its resistance?

    1. 0.85 Ω
    2. 85 Ω
    3. 0.034 Ω
    4. 8.5 Ω
    Show answer

    Answer: A. R = ρL/A = (1.7 × 10⁻⁸ × 50) ÷ (1 × 10⁻⁶) = 85 × 10⁻⁸ ÷ 10⁻⁶ = 85 × 10⁻² = 0.85 Ω.

  5. 5. Which statement about superconductors is correct?

    1. They are perfect insulators at room temperature
    2. They always obey Ohm's law
    3. Their resistance rises sharply when cooled
    4. Their resistance becomes nearly zero when cooled close to 0 K
    Show answer

    Answer: D. Superconductors are conductors whose resistance falls to nearly zero when their temperature is brought down to a value close to 0 kelvin.

Sign in to keep track of the lessons you finish.

Next lesson → Resistors in series and in parallel

Privacy · Terms · Refunds · Delivery