• Practice
  • About 17 min
  • 5 practice questions

Resistors in series and in parallel

Find the effective resistance of resistors joined in series and in parallel, and calculate the current through and potential difference across each resistor.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Recognise series and parallel connections in a circuit diagram.
  • Derive and use Rs = R₁ + R₂ + R₃ and 1/Rp = 1/R₁ + 1/R₂ + 1/R₃.
  • Find the current through, and the potential difference across, each resistor.
  • Explain why bulbs behave differently in series and in parallel.

A resistor is a two-ended component with a definite resistance. Electrical devices often contain several resistors joined together. Ohm's law applies to the whole group as well as to each resistor, and it lets us replace the group by a single effective resistance that draws the same current from the same cell.

Resistors in series

Resistors are in series when they are joined end to end, one after the other, in a single path. The same current I flows through each. The total potential difference V is shared: V = V₁ + V₂ + V₃. Using Ohm's law for each, V₁ = IR₁, V₂ = IR₂, V₃ = IR₃, and for the whole group V = IRs. So IRs = IR₁ + IR₂ + IR₃, and dividing by I: Rs = R₁ + R₂ + R₃ (and so on for n resistors).

  • The effective resistance is larger than the largest individual resistance.
  • This arrangement is used to increase the resistance in a circuit.
  • If one resistor or bulb fails, the single path is broken and all of them stop.
  • Bulbs in series glow dimmer than one bulb alone on the same cell, and dimmer still as more are added, because the total resistance rises and the current falls.

Worked example 1: three resistors in series

Question: Resistors of 6 Ω, 9 Ω and 15 Ω are joined in series to a 12 V battery. Find the effective resistance, the current, and the potential difference across each.

Working: Rs = 6 + 9 + 15 = 30 Ω. I = V/Rs = 12 ÷ 30 = 0.4 A, the same in each. V₁ = 0.4 × 6 = 2.4 V; V₂ = 0.4 × 9 = 3.6 V; V₃ = 0.4 × 15 = 6.0 V. Check: 2.4 + 3.6 + 6.0 = 12 V. The largest resistor takes the largest share of the potential difference.

Resistors in parallel

Resistors are in parallel when one end of each is joined to a common point and the other end of each to a second common point, giving several separate paths. The same potential difference V is across each. The total current is divided: I = I₁ + I₂ + I₃. With I₁ = V/R₁, I₂ = V/R₂, I₃ = V/R₃ and I = V/Rp, dividing through by V gives 1/Rp = 1/R₁ + 1/R₂ + 1/R₃.

  • The effective resistance is smaller than the smallest individual resistance.
  • This arrangement is used to reduce the resistance in a circuit.
  • The current through each resistor is inversely proportional to its resistance: the smaller resistor takes the larger current.
  • If one bulb fails, the others still get current through their own paths and keep glowing as brightly as before.

Worked example 2: three resistors in parallel

Question: Resistors of 4 Ω, 6 Ω and 12 Ω are joined in parallel across a 12 V supply. Find the current in each, the total current and the effective resistance.

Working: I₁ = 12/4 = 3 A; I₂ = 12/6 = 2 A; I₃ = 12/12 = 1 A. Total I = 3 + 2 + 1 = 6 A. 1/Rp = 1/4 + 1/6 + 1/12 = 3/12 + 2/12 + 1/12 = 6/12, so Rp = 2 Ω. Check with Ohm's law: 12 V ÷ 2 Ω = 6 A. And 2 Ω is less than the smallest resistor, 4 Ω.

Worked example 3: two equal resistors

Question: Two 10 Ω resistors are joined (a) in series, (b) in parallel. Find the effective resistance each time.

Working: (a) 10 + 10 = 20 Ω. (b) 1/Rp = 1/10 + 1/10 = 2/10, so Rp = 5 Ω. For n equal resistors R in parallel, Rp = R/n.

Series and parallel at a glance

  • Series
    • One path; same current in each
    • Potential differences add up
    • Rs = R₁ + R₂ + R₃
    • Rs is more than the largest
    • One break stops everything
  • Parallel
    • Several paths; same potential difference across each
    • Currents add up
    • 1/Rp = 1/R₁ + 1/R₂ + 1/R₃
    • Rp is less than the smallest
    • Others keep working if one fails

Series: Rs = R₁ + R₂ + R₃, same current. Parallel: 1/Rp = 1/R₁ + 1/R₂ + 1/R₃, same potential difference.

Key takeaways: in series the current is common and the voltages add; in parallel the voltage is common and the currents add. Series raises resistance, parallel lowers it. Always check your answer: the series total must be bigger than every part, and the parallel total smaller than every part.

Check your understanding

  1. 1. When resistors are connected in series, which quantity is the same for each of them?

    1. Current
    2. Potential difference
    3. Resistance
    4. Heat produced
    Show answer

    Answer: A. In series there is only one path, so the same current flows through every resistor. The potential differences across them differ unless the resistances are equal.

  2. 2. Resistors of 2 Ω, 3 Ω and 5 Ω are connected in series. What is the effective resistance?

    1. 1 Ω
    2. 30 Ω
    3. 0.97 Ω
    4. 10 Ω
    Show answer

    Answer: D. In series, Rs = R₁ + R₂ + R₃ = 2 + 3 + 5 = 10 Ω.

  3. 3. A 6 Ω resistor and a 3 Ω resistor are connected in parallel. What is their effective resistance?

    1. 9 Ω
    2. 2 Ω
    3. 18 Ω
    4. 4.5 Ω
    Show answer

    Answer: B. 1/Rp = 1/6 + 1/3 = 1/6 + 2/6 = 3/6 = 1/2, so Rp = 2 Ω. It is less than the smaller resistor (3 Ω), as it must be.

  4. 4. Three resistors of 12 Ω each are connected in parallel. What is the effective resistance?

    1. 36 Ω
    2. 12 Ω
    3. 4 Ω
    4. 0.25 Ω
    Show answer

    Answer: C. 1/Rp = 1/12 + 1/12 + 1/12 = 3/12, so Rp = 12 ÷ 3 = 4 Ω. For n equal resistors in parallel, Rp = R/n.

  5. 5. A 5 Ω and a 15 Ω resistor are connected in series to a 10 V battery. What is the potential difference across the 15 Ω resistor?

    1. 2.5 V
    2. 7.5 V
    3. 10 V
    4. 5 V
    Show answer

    Answer: B. Rs = 5 + 15 = 20 Ω, so I = 10 ÷ 20 = 0.5 A. Across 15 Ω: V = IR = 0.5 × 15 = 7.5 V. (The 5 Ω resistor gets the other 2.5 V.)

Privacy · Terms · Refunds · Delivery