Revision notes

Paper Folding: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Folds, layers and holes

Folds in half and layers
Number of folds in halfLayers in the thickest part
01
12
24
38

Layers double with each fold in half; one punch makes one hole in every layer it passes through; a hole on a fold line is a single hole.

— Rule to remember

Key takeaways: count the layers at the place of the punch; holes equal layers; a hole on the crease counts once; the next lessons show where these holes land.

Read the full lesson

Lesson 2

Unfolding one fold: where the holes land

The fold line is a mirror: the twin of a hole is the same distance from the crease, on the other side.

— Rule to remember

Key takeaways: a vertical fold keeps the height and swaps the side; a horizontal fold keeps the side and swaps the height; the sum of the coordinates across the crease is the full side length.

Read the full lesson

Lesson 3

Two folds: four holes

Unfold in the reverse order: undo the last fold first, mirroring every hole across its crease each time.

— Rule to remember

Key takeaways: unfold in reverse; mirror every hole at each unfolding; a hole on a crease does not double across that crease.

Read the full lesson

Lesson 4

Diagonal folds

Twins across each fold line
Fold lineTwin of (x, y)
Vertical centre line x = 4(8 minus x, y)
Horizontal centre line y = 4(x, 8 minus y)
Diagonal from bottom-left to top-right(y, x)
Diagonal from top-left to bottom-right(8 minus y, 8 minus x)

On the bottom-left to top-right diagonal, the twin of (x, y) is (y, x). A hole on a crease makes one hole only.

— Rule to remember

Key takeaways: diagonal folds make triangles with two layers; coordinates swap across the main diagonal; points on the crease give one hole.

Read the full lesson

Lesson 5

Paper folding: mixed problems and method

Mistakes and fixes
MistakeFix
Unfolding in the original orderAlways undo the last fold first.
Forgetting that a hole near an edge may be in one layer onlyCount the layers at the exact spot of the hole.
Counting two holes on a creaseA hole on a crease is a single hole.
Mirroring across the wrong lineName each crease before you mirror.

Count layers, name every crease, and unfold in reverse order.

— Rule to remember

Key takeaways: follow the routine, reverse the folds, and trust the coordinates when the drawing is unclear.

Read the full lesson

Lesson 6

Reading a folded packet: where the corners and edges of the sheet go

What each corner of the packet holds
Corner of the packetPoints of the sheet that lie thereWhat they are
Top-right (8, 8)(0, 0), (0, 8), (8, 0) and (8, 8)All four corners of the sheet
Bottom-left (4, 4)(4, 4) four timesThe centre of the sheet
Bottom-right (8, 4)(0, 4) and (8, 4)The middles of the left and right edges
Top-left (4, 8)(4, 0) and (4, 8)The middles of the bottom and top edges

In a twice-folded packet the real corner holds all four corners of the sheet, the opposite corner holds the centre, and the other two corners hold edge middles.

  • Each layer is a different part of the sheet, and a punch goes through all of them.
  • The corner of the packet opposite the centre holds all four corners of the sheet.
  • A punch on a crease does not double across that crease.
Read the full lesson

Lesson 7

Folding the other way: which half of the sheet is the packet?

Where the packet sits, and which edge is the crease
FoldPacketCrease
Left over rightRight half: x from 4 to 8Left edge of the packet, x = 4
Right over leftLeft half: x from 0 to 4Right edge of the packet, x = 4
Bottom over topTop half: y from 4 to 8Bottom edge of the packet, y = 4
Top over bottomBottom half: y from 0 to 4Top edge of the packet, y = 4

Only the distances from the creases matter. Reflect in x = 4 and y = 4 whichever way the paper was folded.

  • The packet sits in the half of the sheet that stays flat; the crease is on the side the paper was folded towards.
  • The unfolding rule is the same for all four directions.
  • Two different foldings can give the same pattern when the holes have the same distances from the creases.
Read the full lesson

Lesson 8

Holes that are not round: how the shape of a twin is reflected

Twins of a triangle hole
HoleCornersCreaseCorners of the twinDescription of the twin
Triangle, point up(5, 2), (7, 2), (6, 5)x = 4(3, 2), (1, 2), (2, 5)Triangle, point up
Triangle, point up(5, 2), (7, 2), (6, 5)y = 4(5, 6), (7, 6), (6, 3)Triangle, point down
Right triangle, right angle at the bottom-right(5, 2), (7, 2), (7, 5)x = 4(3, 2), (1, 2), (1, 5)Right angle at the bottom-left

The twin of a hole is its mirror image across the crease. A vertical crease swaps left and right, a horizontal crease swaps top and bottom, and the side nearest the crease stays nearest.

  • Reflect every corner to find the twin, and join them in the same order.
  • A shape that is symmetrical about the crease direction looks the same in its twin.
  • A shape that is not symmetrical, such as a right triangle, has a twin that is a mirror image.
Read the full lesson

Lesson 9

Checking your answer: three quick tests

Four options
OptionHolesCount 4?Symmetrical about both creases?Distances right?
A(5, 7), (3, 7), (5, 1), (3, 1)YesYesYes
B(5, 7), (3, 7)No: only 2Not testedNot tested
C(5, 7), (3, 7), (7, 1), (1, 1)YesNo: (5, 7) has no twin at (5, 1)Not tested
D(6, 7), (2, 7), (6, 1), (2, 1)YesYesNo: the holes are 2 from x = 4, but the punch is 1 from it

Count the holes, test the symmetry about each crease, and check the distances from the creases. The right answer passes all three.

  • The count test is the fastest, and it often leaves only two options.
  • The symmetry test removes patterns in which a hole has no twin.
  • The distance test separates two symmetrical patterns that differ in how close the holes are to the creases.
Read the full lesson

Privacy · Terms · Refunds · Delivery