- Foundation
- About 12 min
- 5 practice questions
Two folds: four holes
Unfold a sheet folded twice in the correct reverse order and find all four hole positions.
If something looks wrong, please tell us.
When the sheet is folded twice, a single punch usually makes four holes. The secret is to unfold the folds in the reverse order, one at a time. Each unfolding doubles the number of holes by mirroring them across a crease.
The reverse-order method
- Write down the position of the hole in the folded paper.
- Undo the last fold first. Mirror every hole across that crease.
- Undo the first fold next. Mirror all the holes you now have across that crease.
- Count your holes. With two folds in half and a hole in the thickest part, you should have four.
Why in reverse? Because the last fold was done on top of the paper. The first fold's crease lies underneath, and it becomes the outer edge of the folded paper. With two full-sheet centre folds, as in these examples, either order happens to give the same holes, but when a later crease is not a centre line of the whole sheet, opening in the wrong order puts the holes in the wrong places. So make reverse order a habit.
Worked examples
Example 1. A square sheet (0 to 8) is folded left over right along x = 4, then bottom over top along y = 4, so the folded paper covers x from 4 to 8 and y from 4 to 8. A hole is punched at (6, 7). Working: undo the second fold (the horizontal one) and mirror across y = 4: holes at (6, 7) and (6, 1). Undo the first fold and mirror across x = 4: holes at (2, 7) and (2, 1) are added. Answer: four holes at (6, 7), (2, 7), (6, 1), (2, 1), one in each quarter of the sheet.
Example 2. The same folds, and the hole is at (5, 5), close to the centre. Working: undo the horizontal fold: (5, 5) and (5, 3). Undo the vertical fold: (3, 5) and (3, 3). Answer: four holes forming a small square of side 2 around the centre.
Example 3. The same folds, and the hole is on the vertical crease at (4, 6) on the folded paper. Working: undo the horizontal fold: (4, 6) and (4, 2). Undo the vertical fold: each hole lies on the crease x = 4, so it is its own twin. Answer: two holes, at (4, 6) and (4, 2).
Unfold in the reverse order: undo the last fold first, mirroring every hole across its crease each time.
Key takeaways: unfold in reverse; mirror every hole at each unfolding; a hole on a crease does not double across that crease.
Check your understanding
-
1. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along x = 4 and then along y = 4, so the paper lies in the square from (4, 4) to (8, 8). A hole is punched at (5, 6). Which set shows all the holes after opening?
- (5, 6) and (3, 6) only
- (5, 6), (3, 6), (5, 2) and (3, 2)
- (5, 6), (6, 5), (3, 2) and (2, 3)
- (5, 6) and (5, 2) only
Show answer
Answer: B. Undo the last fold first: mirror across y = 4 to get (5, 6) and (5, 2). Then undo the first fold: mirror across x = 4 to add (3, 6) and (3, 2). Four holes, one in each quarter.
-
2. When you unfold a sheet that was folded twice, which fold do you undo first?
- The first fold made
- The fold nearest the hole
- The fold with the most layers
- The last fold made
Show answer
Answer: D. The last fold lies on top, so it is opened first. Mirror every hole across its crease, then undo the earlier fold and mirror all the holes again.
-
3. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along x = 4 and then along y = 4, so the paper lies in the square from (4, 4) to (8, 8). A hole is punched at (4, 7), on the vertical crease. How many holes appear after opening?
- 1
- 2
- 3
- 4
Show answer
Answer: B. Undo the horizontal fold: (4, 7) and (4, 1). Undo the vertical fold: both holes lie on x = 4, so each is its own twin. That leaves 2 holes, at (4, 7) and (4, 1).
-
4. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along x = 4 and then along y = 4, so the paper lies in the square from (4, 4) to (8, 8). A hole is punched at (7, 5). Which point is NOT one of the holes after opening?
- (1, 3)
- (7, 3)
- (3, 7)
- (1, 5)
Show answer
Answer: C. Mirror across y = 4: (7, 5) and (7, 3). Mirror across x = 4: (1, 5) and (1, 3). The point (3, 7) has the coordinates swapped, which no fold here produces.
-
5. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along x = 4 and then along y = 4, so the paper lies in the square from (4, 4) to (8, 8). A hole is punched at (4, 4), the corner where both creases meet. How many holes appear after opening?
- 1
- 2
- 4
- 8
Show answer
Answer: A. (4, 4) lies on both creases, so it is its own twin across y = 4 and across x = 4. Only one hole appears, at the centre of the sheet.
Sign in to keep track of the lessons you finish.