• Foundation
  • About 12 min
  • 5 practice questions

Folding the other way: which half of the sheet is the packet?

Fold right over left and top over bottom as well as left over right and bottom over top, and see why only the distances from the creases decide where the holes go.

If something looks wrong, please tell us.

So far the left half has gone over the right half, and the bottom half has gone up over the top. In an exam the fold can go the other way. The right half can go over the left, and the top half can come down over the bottom. The packet then sits in a different corner of the sheet. Does this change the holes? This lesson shows that it does not, as long as you work with distances from the creases.

Four folds in half

Where the packet sits, and which edge is the crease
FoldPacketCrease
Left over rightRight half: x from 4 to 8Left edge of the packet, x = 4
Right over leftLeft half: x from 0 to 4Right edge of the packet, x = 4
Bottom over topTop half: y from 4 to 8Bottom edge of the packet, y = 4
Top over bottomBottom half: y from 0 to 4Top edge of the packet, y = 4

In every case the crease is the middle line of the sheet, x = 4 or y = 4. A hole at distance d from a crease has its twin at distance d on the other side. So to unfold, reflect in the crease. The rule x goes to 8 - x, and y goes to 8 - y does not depend on which way the paper was folded.

Worked examples

Example 1. The sheet is folded right over left and then top over bottom, so the packet is x from 0 to 4 and y from 0 to 4. A hole is punched at (1, 3). Where are the holes? Working: undo the second fold, reflecting in y = 4: (1, 3) and (1, 5). Undo the first fold, reflecting in x = 4: (7, 3) and (7, 5) are added. Answer: four holes at (1, 3), (1, 5), (7, 3) and (7, 5).

Example 2. The sheet is folded left over right and then bottom over top, so the packet is x from 4 to 8 and y from 4 to 8. A hole is punched at (7, 5). Where are the holes? Working: undo the second fold: (7, 5) and (7, 3). Undo the first fold: (1, 5) and (1, 3) are added. Answer: four holes at (1, 3), (1, 5), (7, 3) and (7, 5).

Example 3. Compare Examples 1 and 2. Working: the holes are the same four points. In Example 1 the hole is 3 from the crease x = 4 (since 4 - 1 = 3) and 1 from the crease y = 4. In Example 2 it is 3 from x = 4 (since 7 - 4 = 3) and 1 from y = 4. The distances from the creases are the same, so the pattern is the same. Answer: the four holes are the same.

Example 4. The sheet is folded once, right over left, and a hole is punched at (1, 6). Where is the other hole? Working: the crease is x = 4, and 8 - 1 = 7. Answer: the other hole is at (7, 6).

Only the distances from the creases matter. Reflect in x = 4 and y = 4 whichever way the paper was folded.

Key takeaways

  • The packet sits in the half of the sheet that stays flat; the crease is on the side the paper was folded towards.
  • The unfolding rule is the same for all four directions.
  • Two different foldings can give the same pattern when the holes have the same distances from the creases.

Check your understanding

  1. 1. A sheet is folded right over left. Which half of the sheet does the packet cover?

    1. The right half
    2. The left half
    3. The top half
    4. The bottom half
    Show answer

    Answer: B. The right half is folded onto the left half, so the packet is the left half, with x from 0 to 4.

  2. 2. The sheet is folded right over left. A hole is punched at (1, 6). Where is the other hole?

    1. (7, 2)
    2. (1, 2)
    3. (7, 6)
    4. (3, 6)
    Show answer

    Answer: C. The crease is x = 4, and the twin of (1, 6) is (8 - 1, 6) = (7, 6).

  3. 3. A sheet is folded right over left and then top over bottom. A hole is punched at (1, 3). Which is the centre of one of the other holes?

    1. (7, 5)
    2. (5, 3)
    3. (1, 7)
    4. (3, 5)
    Show answer

    Answer: A. The holes are (1, 3), (1, 5), (7, 3) and (7, 5).

  4. 4. A sheet is folded left over right and then bottom over top. A hole is punched at (7, 5). How many holes does the opened sheet have?

    1. 8
    2. 2
    3. 1
    4. 4
    Show answer

    Answer: D. The punch is clear of both creases and goes through 4 layers.

  5. 5. A hole at (1, 3) in one packet and a hole at (7, 5) in another packet give the same four holes. Why?

    1. Both folds go the same way
    2. Both packets are the same size
    3. Same distances from the creases
    4. Both are on the same side
    Show answer

    Answer: C. Both holes are 3 from the crease x = 4 and 1 from the crease y = 4. Only the distances from the creases decide the pattern.

Privacy · Terms · Refunds · Delivery