• Foundation
  • About 12 min
  • 5 practice questions

Reading a folded packet: where the corners and edges of the sheet go

See which parts of the sheet lie on top of each other in a folded packet, and use this to know how many holes a punch near a corner or an edge will make.

If something looks wrong, please tell us.

When a figure shows a folded packet, you need to know which parts of the sheet are hidden inside it. A punch near one corner of the packet goes through every layer there, and each layer is a different part of the sheet. In this lesson we follow the corners and the edge middles of a square sheet through two folds.

After one fold

Take a square sheet with corners at (0, 0) and (8, 8). Fold the left half over the right half. The crease is the vertical line x = 4. The top-left corner of the sheet lands on the top-right corner, and the bottom-left corner lands on the bottom-right corner. So each right-hand corner of the packet now has two corners of the sheet on top of each other. The middle of the top edge of the sheet, at (4, 8), is at the top end of the crease, and the middle of the bottom edge, at (4, 0), is at the bottom end of the crease.

After two folds

Now fold the bottom half of the packet up over the top half. The crease is the line y = 4. The packet is the square from (4, 4) to (8, 8). It has four layers everywhere. Each corner of the packet holds some special points of the sheet.

What each corner of the packet holds
Corner of the packetPoints of the sheet that lie thereWhat they are
Top-right (8, 8)(0, 0), (0, 8), (8, 0) and (8, 8)All four corners of the sheet
Bottom-left (4, 4)(4, 4) four timesThe centre of the sheet
Bottom-right (8, 4)(0, 4) and (8, 4)The middles of the left and right edges
Top-left (4, 8)(4, 0) and (4, 8)The middles of the bottom and top edges

A punch near the top-right corner of the packet makes four holes near the four corners of the sheet. A punch near the bottom-left corner makes four holes round the centre of the sheet.

Worked examples

Example 1. A square sheet is folded left over right. Which parts of the sheet lie on top of each other at the top-right corner of the packet? Working: the packet is the right half, and the left half is folded over it. The top-right corner of the sheet is on top of, or under, the top-left corner. Answer: the top-left and top-right corners of the sheet.

Example 2. After the two folds above, a hole is punched close to the top-right corner of the packet, at (7, 7). Where are the holes on the opened sheet? Working: undo the fold in y: (7, 7) and (7, 1). Undo the fold in x: (1, 7) and (1, 1) are added. Answer: four holes, each one unit in from a corner of the sheet.

Example 3. A hole is punched at the top-left corner of the packet, at (4, 7), close to the crease x = 4. Working: the point is on the crease, so it does not double in x. Undo the fold in y: (4, 7) and (4, 1). Answer: two holes, at (4, 7) and (4, 1), in the middle of the top and bottom edges. If the punch is on the crease and near the edge of the sheet, the hole is near the middle of an edge.

In a twice-folded packet the real corner holds all four corners of the sheet, the opposite corner holds the centre, and the other two corners hold edge middles.

Key takeaways

  • Each layer is a different part of the sheet, and a punch goes through all of them.
  • The corner of the packet opposite the centre holds all four corners of the sheet.
  • A punch on a crease does not double across that crease.

Check your understanding

  1. 1. A square sheet is folded left over right. What lies on the top-right corner of the packet, together with the top-right corner of the sheet?

    1. The top-left corner
    2. The bottom-left corner
    3. The centre of the sheet
    4. The bottom-right corner
    Show answer

    Answer: A. Folding left over right brings the left half onto the right half. The top-left corner lands on the top-right corner.

  2. 2. A sheet is folded twice (packet from (4, 4) to (8, 8)). What does the top-right corner of the packet hold?

    1. The centre of the sheet
    2. All four corners of the sheet
    3. The middles of two edges
    4. Only one corner
    Show answer

    Answer: B. Each fold brings two corners onto each other. After two folds all four corners lie on the top-right corner of the packet.

  3. 3. In the same packet, a hole is punched at (7, 7). How many holes does the opened sheet have?

    1. 2
    2. 1
    3. 4
    4. 8
    Show answer

    Answer: C. The punch is clear of the creases and goes through 4 layers.

  4. 4. In the same packet, a hole is punched at (4, 7), on the crease x = 4. How many holes does the opened sheet have?

    1. 8
    2. 1
    3. 4
    4. 2
    Show answer

    Answer: D. The punch is on one crease, so the 4 layers give only 2 holes: (4, 7) and (4, 1).

  5. 5. In the same packet, a punch is made close to the corner (4, 4), where the two creases meet. What does the opened sheet show?

    1. Holes around the centre of the sheet
    2. Holes near the four corners of the sheet
    3. A hole on each edge
    4. One hole near a corner
    Show answer

    Answer: A. The corner (4, 4) of the packet holds the centre of the sheet, so the four holes are around the centre.

Privacy · Terms · Refunds · Delivery