• Foundation
  • About 10 min
  • 5 practice questions

Folds, layers and holes

Understand how a fold doubles the layers of paper and why a hole punched through folded paper makes more than one hole.

If something looks wrong, please tell us.

In a paper-folding question a sheet of paper is folded one or more times, a hole is punched, and you must say what the paper looks like when it is opened again. The figures in an exam are drawings, but the logic is just what happens with a real sheet. In this lesson we learn the two basic facts: folds create layers, and a punch goes through every layer.

A fold makes layers

Take a square sheet. Fold it in half along a vertical line so that the left half lies on top of the right half. The folded paper now has two layers in the same place. Fold it in half again along a horizontal line and you have four layers. Each fold in half doubles the number of layers.

Folds in half and layers
Number of folds in halfLayers in the thickest part
01
12
24
38

A punch goes through all the layers

A hole punch cuts through the whole folded stack at the same spot. If the spot is covered by four layers, four holes are made, one in each layer. When the paper is unfolded, those four holes appear in four different places. Where the paper has fewer layers, fewer holes are made. A corner that is covered by only one layer gives only one hole.

A hole on the fold line

A hole whose centre lies on the fold line is cut through both halves of the crease. After unfolding, the two half-holes join and make one hole that sits on the crease. This case is a common trap, since you may expect two holes.

Worked examples

Example 1. A sheet is folded in half once, and one hole is punched at a spot covered by two layers. How many holes appear when it is unfolded? Working: one hole per layer, and there are two layers. Answer: 2 holes.

Example 2. A sheet is folded in half twice, and one hole is punched through the whole stack. How many holes? Working: two folds give 2 times 2, which is 4 layers, and every layer gets a hole. Answer: 4 holes.

Example 3. A sheet is folded in half once and a hole is punched exactly on the fold line. How many holes? Working: both halves share the crease, so the two half-holes join. Answer: 1 hole, on the crease.

Layers double with each fold in half; one punch makes one hole in every layer it passes through; a hole on a fold line is a single hole.

— Rule to remember

Key takeaways: count the layers at the place of the punch; holes equal layers; a hole on the crease counts once; the next lessons show where these holes land.

Check your understanding

  1. 1. A sheet is folded in half twice. How many layers are there in the thickest part?

    1. 2
    2. 3
    3. 4
    4. 8
    Show answer

    Answer: C. Each fold in half doubles the layers: 1 becomes 2, then 2 becomes 4.

  2. 2. A sheet is folded in half three times and one hole is punched through the whole stack, not on any fold line. How many holes appear when it is opened?

    1. 8
    2. 6
    3. 3
    4. 4
    Show answer

    Answer: A. Three folds give 2 x 2 x 2 = 8 layers, and the punch makes one hole in every layer, so there are 8 holes.

  3. 3. A sheet is folded in half once and a hole is punched exactly on the fold line. How many holes appear when it is opened?

    1. 2
    2. 1
    3. 0
    4. 4
    Show answer

    Answer: B. The punch cuts half a hole on each side of the crease. When the sheet is opened the two halves join into a single hole sitting on the crease.

  4. 4. A sheet is folded in half once and three separate holes are punched through both layers, none on the fold line. How many holes appear on opening?

    1. 3
    2. 4
    3. 5
    4. 6
    Show answer

    Answer: D. Each punch goes through 2 layers, so it makes 2 holes. Three punches make 3 x 2 = 6 holes.

  5. 5. What does each fold in half do to the number of layers?

    1. Adds one layer
    2. Doubles the layers
    3. Halves the layers
    4. Leaves them the same
    Show answer

    Answer: B. Folding in half lays one half on the other, so wherever there were n layers there are now 2n: 1, 2, 4, 8 and so on.

Privacy · Terms · Refunds · Delivery