• Foundation
  • About 12 min
  • 5 practice questions

Paper folding: mixed problems and method

Combine the fold rules in a repeatable routine and avoid the common mistakes in mixed paper-folding questions.

If something looks wrong, please tell us.

We now have all the tools: layers, twins across a crease, reverse-order unfolding, diagonals. This lesson puts them into a routine and works through mixed questions of the kind you will meet in exams.

The routine

  1. List the folds in order and draw each crease.
  2. Count the layers where the punch falls. This tells you how many holes to expect.
  3. Place the hole in the sheet coordinates (or in a rough grid of quarters).
  4. Unfold in reverse order, mirroring all holes across each crease.
  5. Check: do you have the expected number of holes? Are any on a crease, which would make fewer?

Common traps

Mistakes and fixes
MistakeFix
Unfolding in the original orderAlways undo the last fold first.
Forgetting that a hole near an edge may be in one layer onlyCount the layers at the exact spot of the hole.
Counting two holes on a creaseA hole on a crease is a single hole.
Mirroring across the wrong lineName each crease before you mirror.

Worked examples

Example 1. A sheet (0 to 8) is folded along x = 4 (right over left, so the paper lies in x from 0 to 4), then along y = 4 (top over bottom, so the paper lies in y from 0 to 4). A hole is punched at (1, 3). Working: undo the horizontal fold: (1, 3) and (1, 5). Undo the vertical fold: (7, 3) and (7, 5). Answer: four holes, (1,3), (1,5), (7,3), (7,5).

Example 2. A sheet is folded once along x = 4 and a hole is punched at (6, 4), and then a second hole at (5, 1). How many holes in total on opening? Working: the first hole, (6, 4), is not on the crease (the crease is x = 4), so it has a twin at (2, 4). The second has a twin at (3, 1). Answer: 4 holes.

Example 3. A sheet (0 to 8) is folded along the diagonal from (0, 0) to (8, 8), and a hole is punched at (2, 5) and another at (6, 6). How many holes appear on opening? Working: (2, 5) is off the crease, so its twin is (5, 2): two holes. (6, 6) is on the crease, so it is one hole. Answer: 3 holes, at (2, 5), (5, 2) and (6, 6).

Count layers, name every crease, and unfold in reverse order.

— Rule to remember

Key takeaways: follow the routine, reverse the folds, and trust the coordinates when the drawing is unclear.

Check your understanding

  1. 1. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along x = 4 (right over left, paper in x from 0 to 4) and then along y = 4 (top over bottom, paper in y from 0 to 4). A hole is punched at (2, 1). Which of these is one of the holes after opening?

    1. (2, 7)
    2. (1, 2)
    3. (7, 2)
    4. (2, 5)
    Show answer

    Answer: A. Undo the horizontal fold: (2, 1) and (2, 7). Undo the vertical fold: (6, 1) and (6, 7). Of the options only (2, 7) is in this set.

  2. 2. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded once along x = 4. Holes are punched at (6, 3) and at (4, 5). How many holes appear on opening?

    1. 2
    2. 3
    3. 4
    4. 5
    Show answer

    Answer: B. (6, 3) is off the crease, so it has a twin at (2, 3): two holes. (4, 5) lies on the crease x = 4, so it is a single hole. Total 3.

  3. 3. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along x = 4 and then along y = 4, so the paper lies in the square from (4, 4) to (8, 8). A hole is punched at (6, 6). How many holes are in the lower half of the opened sheet?

    1. 0
    2. 1
    3. 2
    4. 4
    Show answer

    Answer: C. The holes are (6, 6), (6, 2), (2, 6) and (2, 2). Those with y below 4 are (6, 2) and (2, 2), so there are 2 in the lower half.

  4. 4. Which mistake does the habit 'name each crease before you mirror' prevent?

    1. Counting two holes on a crease
    2. Unfolding in the original order
    3. Forgetting that a hole near an edge may be in one layer only
    4. Mirroring a hole across the wrong line
    Show answer

    Answer: D. Naming each crease (for example x = 4 or the diagonal) before mirroring makes sure each hole is reflected across the correct line. The other mistakes have their own fixes: one hole on a crease, undo the last fold first, and count layers at the spot.

  5. 5. A sheet is folded in half twice and one hole is punched so that it lies on the second crease only. How many holes appear on opening?

    1. 1
    2. 2
    3. 4
    4. 8
    Show answer

    Answer: B. Across the second crease the hole is its own twin, so it stays one hole. Across the first crease it doubles. That makes 2 holes.

Privacy · Terms · Refunds · Delivery