- Foundation
- About 11 min
- 5 practice questions
Unfolding one fold: where the holes land
Find the position of the second hole when a sheet folded once is unfolded, using the idea that the crease acts as a mirror.
If something looks wrong, please tell us.
After one fold and one punch, how do we know where the other hole will be? The answer is the mirror idea you may know from reflection questions: the fold line is a mirror. A hole and its twin are the same distance from the crease, on opposite sides.
Using a number grid
To be exact, imagine a square sheet whose sides run from 0 to 8, so its centre is at 4. A point is written as (x, y): x is the distance from the left edge, and y is the distance from the bottom edge.
A vertical fold along x = 4 means a hole at (x, y) has a twin at (8 minus x, y). A horizontal fold along y = 4 means the twin of a hole at (x, y) is at (x, 8 minus y). The distance from the crease is the same on both sides, which is why the sum of the two coordinates across the crease is 8.
Reading it without numbers
- If the fold is vertical and the hole is in the right half, the twin is in the left half at the same height, and the same distance from the crease.
- If the fold is horizontal and the hole is in the top half, the twin is in the bottom half, directly below, and the same distance from the crease.
- A hole near the crease has a twin near the crease; a hole near the edge has a twin near the opposite edge.
Worked examples
Example 1. A square sheet (0 to 8) is folded along the vertical line x = 4, left over right. A hole is punched at (6, 6). Where are the holes after opening? Working: the twin is at (8 minus 6, 6), which is (2, 6). Answer: holes at (6, 6) and (2, 6), both near the top, one on each side.
Example 2. The same sheet is folded along y = 4, bottom up over top. A hole is punched at (3, 7). Working: the twin is at (3, 8 minus 7), which is (3, 1). Answer: holes at (3, 7) and (3, 1), one near the top, one near the bottom, in the same column.
Example 3. Folded along x = 4, a hole is punched at (5, 2), close to the crease and near the bottom. Working: twin at (3, 2). Answer: two holes at the same height, each one unit from the crease.
The fold line is a mirror: the twin of a hole is the same distance from the crease, on the other side.
Key takeaways: a vertical fold keeps the height and swaps the side; a horizontal fold keeps the side and swaps the height; the sum of the coordinates across the crease is the full side length.
Check your understanding
-
1. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along x = 4 and a hole is punched at (5, 6). Where is the other hole after opening?
- (3, 6)
- (5, 2)
- (3, 2)
- (6, 5)
Show answer
Answer: A. For a vertical fold along x = 4 the twin of (x, y) is (8 - x, y). So the twin of (5, 6) is (3, 6): same height, one unit on the other side of the crease.
-
2. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along y = 4 and a hole is punched at (6, 7). Where is the other hole after opening?
- (2, 7)
- (6, 1)
- (2, 1)
- (7, 6)
Show answer
Answer: B. For a horizontal fold along y = 4 the twin of (x, y) is (x, 8 - y). So the twin of (6, 7) is (6, 1), directly below in the same column.
-
3. A sheet is folded along its vertical centre line and a hole is punched near the lower corner of the right half. Where do the two holes lie after opening?
- Both in the lower right
- One lower right, one upper right
- One in each lower corner
- One lower right, one upper left
Show answer
Answer: C. The vertical crease acts as a mirror that swaps left and right but keeps the height. The twin is therefore near the lower-left corner, so there is one hole in each lower corner.
-
4. A square sheet has sides running from 0 to 8, and (x, y) gives the distance from the left edge and from the bottom edge. It is folded along y = 4 and a hole is punched at (3, 4). What appears after opening?
- Two holes, at (3, 4) and (5, 4)
- Two holes, at (3, 4) and (3, 0)
- No hole
- One hole, at (3, 4)
Show answer
Answer: D. The point (3, 4) lies on the crease y = 4. It is its own twin: (3, 8 - 4) = (3, 4). So there is a single hole, sitting on the crease.
-
5. A sheet is folded along a horizontal line and a hole is punched. What is the same for the hole and its twin after opening?
- Their distance from the left edge
- Their distance from the bottom edge
- Nothing at all
- Both of their coordinates
Show answer
Answer: A. A horizontal fold keeps the side and swaps the height: the twin of (x, y) is (x, 8 - y). The x-coordinate, the distance from the left edge, is unchanged.
Sign in to keep track of the lessons you finish.