• Practice
  • About 14 min
  • 5 practice questions

Counting layers and partial folds

Decide how many holes a punch makes by counting the layers it passes through, including folds that cover only part of the sheet.

If something looks wrong, please tell us.

The number of holes made by one punch equals the number of layers of paper at that spot. Usually every spot has the same number of layers, but with partial folds it does not, and that is where the traps are.

Layers and holes

  • Folding in half once gives 2 layers, twice gives 4, three times gives 8.
  • A punch not on any crease makes as many holes as layers it passes through.
  • A hole centred on a crease unites two layers into one hole, so it makes fewer holes.
  • Where only one layer lies, a punch makes a single hole.

Worked examples

Example 1. The 8 by 8 sheet is folded in half three times and one hole is punched, away from every crease. There are 2 times 2 times 2 = 8 layers, so 8 holes.

Example 2. The strip of the sheet with x from 0 to 2 is folded over along x = 2, so that it lies on the part from x = 2 to x = 4. The strip from x = 2 to x = 4 now has 2 layers, and the part from x = 4 to x = 8 still has 1 layer. A punch at (3, 5) goes through 2 layers. The reflection of x = 3 across x = 2 is 4 minus 3 = 1, so the holes are (3, 5) and (1, 5).

Example 3. In the same folded sheet a punch at (6, 5) goes through a single layer, so it makes one hole at (6, 5).

Example 4. A sheet is folded in half twice and one punch is made through all layers, away from the creases. There are 4 layers, so 4 holes. Two such punches give 8 holes.

Holes from one punch = layers at that spot, reduced for any hole centred on a crease.

— Rule to remember

Key takeaways

  • Count the layers at the exact spot of the punch.
  • Each fold in half doubles the layers.
  • Partial folds give different layer counts in different regions.

Check your understanding

  1. 1. A sheet is folded in half twice. Three separate punches are made through all layers, away from the creases and from each other. How many holes appear in all?

    1. 7
    2. 8
    3. 16
    4. 12
    Show answer

    Answer: D. Two folds give 4 layers, so each punch makes 4 holes. Three punches make 3 x 4 = 12 holes.

  2. 2. On an 8 by 8 sheet with (0, 0) at the bottom-left corner, only the strip from x = 0 to 2 is folded over along x = 2, so it lies on the part from x = 2 to 4. A punch is made at (3, 2). Where are the holes?

    1. (5, 2) and (3, 2)
    2. (1, 2) and (3, 2)
    3. (3, 6) and (3, 2)
    4. (3, 2) only
    Show answer

    Answer: B. At x = 3 there are 2 layers. Reflecting x = 3 across x = 2 gives 4 - 3 = 1, so the other hole is at (1, 2).

  3. 3. On an 8 by 8 sheet with (0, 0) at the bottom-left corner, only the strip from x = 0 to 2 is folded over along x = 2. A punch is made at (7, 3). How many holes appear?

    1. 1
    2. 2
    3. 3
    4. 4
    Show answer

    Answer: A. The part from x = 4 to 8 was not folded, so it has only 1 layer. A punch there makes a single hole at (7, 3).

  4. 4. On an 8 by 8 sheet with (0, 0) at the bottom-left corner, only the strip from x = 0 to 3 is folded over along x = 3, so it lies on the part from x = 3 to 6. A punch is made at (4, 5). Where are the holes?

    1. (4, 5) and (6, 5)
    2. (4, 5) only
    3. (4, 5) and (2, 5)
    4. (4, 5) and (4, 3)
    Show answer

    Answer: C. At x = 4 there are 2 layers. Across the crease x = 3, x = 4 reflects to 6 - 4 = 2, so the holes are (4, 5) and (2, 5).

  5. 5. A sheet is folded in half twice. One punch, through all layers, is centred on the second crease but not on the first. How many holes appear?

    1. 1
    2. 3
    3. 4
    4. 2
    Show answer

    Answer: D. The four layers are joined in pairs along the second crease, so each pair gives one hole on that crease. That makes 2 holes.

Privacy · Terms · Refunds · Delivery