• Practice
  • About 14 min
  • 5 practice questions

Mixed paper folding practice and common traps

Practise a complete routine for mixed fold-and-punch problems and learn the traps that cost marks.

If something looks wrong, please tell us.

In the exam you will not have coordinates drawn for you, but you can imagine them. Use the routine below every time, and you will make fewer slips.

Routine

  1. List the folds in order and name each crease.
  2. Place the punch in the folded packet.
  3. Undo the last fold first: reflect every hole in that crease.
  4. Continue back to the first fold.
  5. Count the holes and check they agree with the number of layers.

Common traps

  • Undoing the folds in the wrong order.
  • Reflecting only the newest hole instead of all holes so far.
  • Forgetting that a hole centred on a crease stays single.
  • Counting holes without checking whether the punch is in a part with fewer layers.

Worked examples

Example 1. Folds: left half over right (x = 4), then bottom half up (y = 4). Punch at (5, 7). Undo y = 4: (5, 1). Undo x = 4: (3, 7) and (3, 1). Holes: (5, 7), (5, 1), (3, 7), (3, 1).

Example 2. Fold along y = x, then punch at (7, 6). Reflection: (6, 7). Two holes.

Example 3. Two punches, at (6, 6) and (5, 5), after folds along x = 4 and y = 4. Each makes four holes and the holes do not coincide, so 8 holes in total.

Last fold first, reflect every hole, count against the layers.

— Rule to remember

Key takeaways

  • Follow the five-step routine every time.
  • Undo folds in reverse order and reflect all holes.
  • Check the hole count against the number of layers.

Check your understanding

  1. 1. On an 8 by 8 sheet, use the standard setup: the left half is folded over the right along x = 4, then the bottom half is folded up along y = 4, so the packet fills x from 4 to 8 and y from 4 to 8. A hole is punched at (7, 6). Which set is correct?

    1. (7, 6) and (1, 6) only
    2. (7, 6), (7, 2), (1, 6), (1, 2)
    3. (7, 6), (6, 7), (1, 2), (2, 1)
    4. (7, 6), (7, 2), (1, 6), (2, 1)
    Show answer

    Answer: B. Undo y = 4 first: (7, 6) and (7, 2). Then reflect both across x = 4: (1, 6) and (1, 2).

  2. 2. On an 8 by 8 sheet, use the standard setup: the left half is folded over the right along x = 4, then the bottom half is folded up along y = 4, so the packet fills x from 4 to 8 and y from 4 to 8. A student punches at (6, 7), undoes fold 2 to get (6, 1), then reflects only (6, 1) across x = 4 and ends with three holes. Which trap is this?

    1. Reflecting only the newest hole instead of all the holes so far
    2. Undoing the folds in the wrong order
    3. Forgetting that a hole on a crease stays single
    4. Punching where there are fewer layers
    Show answer

    Answer: A. At each unfolding every hole found so far must be reflected. Reflecting (6, 7) across x = 4 as well gives the missing hole (2, 7), so there are 4 holes: (6, 7), (6, 1), (2, 7), (2, 1).

  3. 3. On an 8 by 8 sheet, use the standard setup: the left half is folded over the right along x = 4, then the bottom half is folded up along y = 4, so the packet fills x from 4 to 8 and y from 4 to 8. Punches are made at (6, 6) and at (4, 6). How many holes appear in all?

    1. 8
    2. 4
    3. 6
    4. 5
    Show answer

    Answer: C. (6, 6) is on no crease and gives 4 holes. (4, 6) lies on the crease x = 4: undoing y = 4 gives (4, 6) and (4, 2), and undoing x = 4 adds nothing. That is 2 more, so 6 in all.

  4. 4. On an 8 by 8 sheet with (0, 0) at the bottom-left corner, the sheet is folded along y = x, and holes are punched at (6, 1) and (4, 4). How many holes appear on opening?

    1. 2
    2. 4
    3. 5
    4. 3
    Show answer

    Answer: D. (6, 1) is off the crease and gives (6, 1) and (1, 6). (4, 4) lies on y = x, so it stays single. Total 3.

  5. 5. On an 8 by 8 sheet, use the standard setup: the left half is folded over the right along x = 4, then the bottom half is folded up along y = 4, so the packet fills x from 4 to 8 and y from 4 to 8. A hole is punched at (5, 5). The holes on opening form a square. What is the length of its side?

    1. 2
    2. 4
    3. 1
    4. 3
    Show answer

    Answer: A. Undo y = 4: (5, 5) and (5, 3). Undo x = 4: (3, 5) and (3, 3). The x-values are 3 and 5 and the y-values are 3 and 5, so the side is 2.

Privacy · Terms · Refunds · Delivery